nlash Posted October 10, 2019 Share Posted October 10, 2019 Hi all, Unraid won't reboot when I hit the command on the main menu in the GUI. The array shuts down and I can no longer access the GUI, but the machine never fully reboots. How can I find out what's causing this? Quote Link to comment
Frank1940 Posted October 10, 2019 Share Posted October 10, 2019 The latest versions of Unraid have a 'Syslog Server' utility. You will find on the Settings page in the 'Network Services' section. Set it up to Mirror syslog to the Flash Drive. Get the Diagnostics file ( Tools >>> Diagnostics ). Then reboot the server. After it hangs, force the shutdown by holding the power switch on the case. Pull the flash drive and get the file off and post both files up in a NEW post. Quote Link to comment
Sophware Posted May 9, 2020 Share Posted May 9, 2020 Apparently, they didn't want to go through that, lol. I'm having the same issue and will troubleshoot. Why pull the flash and get the file off before the boot? Why not just grab it when the server comes back up? Quote Link to comment
Frank1940 Posted May 10, 2020 Share Posted May 10, 2020 Because (since the server never fully reboots), Pushing the power switch will either shutdown the server gracefully (short push) or force it to an ungraceful shutdown (longer push). In either case, the power will be off. That is the perfect time to remove any flash drive from a computer. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.