October 18, 20196 yr I'm going to get a mikrotik switch and wondering what the compatibility is with a couple nics i was thinking of getting. The specific switch I am getting is Mikrotik CRS305 I will use the rj45 port to connect to powerline. I was originally thinking of getting 2 of these, Aquantia 10g SFP+ Nic single port with these cables, 1 meter SFP+ Cable , mikrotik and cisco compatible but then I saw this used item, 2x Mellanox NIC,with cable. Iheard there may some compatibility issues when using hardware from different companies. Anyone know if there is any such incompatibilities with mikrotik and aquantia/mellanox? Which is one is better? or if anyone has any other suggestions, that would be greatly appreciated. one of the nic will go into an unraid server, and the other into a windows 10 pc.
October 18, 20196 yr I use that quad port 10gb mikrotik switch with a Mellanox connectx2 and a solar flare dual port using dacs, and a 10GB copper transceiver from fs.com (generic), in which the copper runs through cat6a to a 24 port gigabit/2port 10gbe switch using the same fs.com copper transceiver. I hit the speeds expected. buy the Mellanox on eBay and not amazon, should be cheaper.
October 18, 20196 yr 20 minutes ago, Nelson said: Anyone know if there is any such incompatibilities with mikrotik and aquantia/mellanox? Many people use mellanox ( i.e. ConnectX2 or X3 ) without problem with Unraid, just take care you buy the one in ethernet mode not dual mode ( IB and Ethernet ). For aquantia, Unraid also support but can't confirm the one which you mention, seldom people report use aquantia. Edited October 18, 20196 yr by Benson
October 18, 20196 yr Author 20 minutes ago, Benson said: Many people use mellanox ( i.e. ConnectX2 or X3 ) without problem with Unraid, just take care you buy the one in ethernet mode not dual mode ( IB and Ethernet ). For aquantia, Unraid also support but can't confirm the one which you mention, seldom people report use aquantia. the cable i linked to, will it work with mikrotik and mellanox as well? ive heard some people say that sometimes, because cisco does cisco and and others do their own thing, that while it can physically connect, their software/programming? doesnt allow it. would that happen if i use the mellanox and mikrotik with the cisco/mikrotik compatible cable?
October 19, 20196 yr Should work fine, I use mostly Cisco cables also with Mellanox and Microtik 8p switch.
Archived
This topic is now archived and is closed to further replies.