October 19, 20196 yr Hi, My disk was disabled after the array heath report came back as Passed and parity check good. The SMART shows Healthy. I am unsure how to proceed next. I have attached the diagnostic report. Any help would be appreciated. Version 6.7.2 Michael tower-diagnostics-20191019-0641.zip
October 19, 20196 yr No SMART report for disabled Disk1. Check connections, power and SATA, both ends, then post a new diagnostic.
October 19, 20196 yr Author Hi, Well I powered down and checked connections, power and SATA. Power on and disk 1 now shows unassigned. The dropdown for disk 1 does not show the original disk as an option. So I think that means the drive is dead? Or is there options to proceed that I have missed? Thank you.
October 19, 20196 yr 33 minutes ago, 2webbed said: The dropdown for disk 1 does not show the original disk as an option. So I think that means the drive is dead? It means Unraid can't see the disk. Could be disk, could be cable(s), could be port... Are there any power splitters involved?
October 19, 20196 yr Author Hi, No power splitters, however, it does have 3 power connectors off the same power cable from PS. It is same cable that powers disk 2. I will try a different power cord as it could be a bad connector as you indicated. Before I powered off Disk 1 under SMART said Healthy. EDIT: OK I swapped power and SATA cables and drive does not come up. So I guess it has died. 3 months out of warranty of course Thank you. Michael Edited October 19, 20196 yr by 2webbed
October 19, 20196 yr I guess you will have to replace it. Then assign the new disk to slot1, start the array, and Unraid will rebuild its contents from the parity calculation. Do you have another copy of anything important and irreplaceable?
October 23, 20196 yr Author Hi, I have installed a new drive and the rebuild is in progress. That's a good question. I have been putting files randomly on drives but usually anything important I keep in 2 places. The majority of unraid is media server and my photos. All photos backed up in 3 places. Media server files no backup. Thanks for all your help.
Archived
This topic is now archived and is closed to further replies.