On 12/31/2022 at 2:26 AM, oneskinnydave said:

Hey All - I had an old version of macinabox running fine but wanted to upgrade OS systems - removed everything (appdata, domains, and custom_ovm files - but getting this weird state after installing OS (Big Sur or any other) - just goes back to an install window with MacOS Base System, OS Installer or Recovery DMG. Is there something I'm missing here?  If I click on any of those options it just dumps me to the installer again.

 

 

Did you try the installer.. usually it carrys on installing then reboots again. I found after then that doing a reset nvram seemed to get it to boot normally.

 

Has anyone worked out to safely increase the number of cpu cores?

2 hours ago, daddintech said:

Every time I shut the VM down and restart it, I receive the "Your computer was restarted because of a problem."

When you booted again there should be some more data on that window, you should be able to see what crashed.

7 hours ago, ghost82 said:

When you booted again there should be some more data on that window, you should be able to see what crashed.

I appreciate the response!  I have looked at the log, but am very out of practice and barely more educated than a novice with the more technical aspects of macOS.  Would a copy of the log pasted here be helpful or would you (or anyone) be able to guide me through analyzing the log?  

 

I have looked online at some guides regarding examination of these types of logs.  Unfortunately, my log does not give me a suggestions as to the cause at the opening of the log as some of the guides stated may be present.  The opening line is as follows:

 

panic(cpu 3 caller 0xffffff800f1937e5): ""@/System/Volumes/Data/SWE/macOS/BuildRoots/15c9597e6e/Library/Caches/com.apple.xbs/Sources/xnu/xnu-7195.141.46/osfmk/corecrypto/cc_abort.c:50

 

The backtrace is somewhat foreign to me, but I do see the mention of USB a fair number of times.  I do not have any USB ports or any hardware, for that matter, being passed through to the VM.  

 

Something else possibly of interest to note in the log is the line:  "Mac OS version:  Not yet set".  This may be nothing and completely normal, but thought I would throw it out there just in case.  

 

Thanks in advance!

Edited January 9, 20233 yr by daddintech

9 hours ago, daddintech said:

I have looked at the log

mmm I don't know, can you paste the full backtrace?

Once you reboot a window should popup, click on show details and paste all here, it should be something like this:
 

panic(cpu 0 caller 0xffffff8006262e0a): Kernel trap at 0xffffff7f8998c7ce, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000001badf000, CR4: 0x00000000003626e0
RAX: 0x0000000000000000, RBX: 0xffffff9124ef5000, RCX: 0xffffff8006aa30a0, RDX: 0x0000000000000000
RSP: 0xffffff9124e7bd10, RBP: 0xffffff9124e7bd20, RSI: 0xffffff802d320240, RDI: 0xffffff9124ef5000
R8:  0x0000000000000000, R9:  0x0000000000000004, R10: 0x0000000000000051, R11: 0xffffff8028537000
R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0xffffff9124ef5000, R15: 0xffffff802e5a2000
RFL: 0x0000000000010282, RIP: 0xffffff7f8998c7ce, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0, VF: 1

Backtrace (CPU 0), Frame : Return Address
0xffffff9124e7b770 : 0xffffff8006139a3b
0xffffff9124e7b7c0 : 0xffffff8006270fe5
0xffffff9124e7b800 : 0xffffff8006262a5e
0xffffff9124e7b850 : 0xffffff80060e0a40
0xffffff9124e7b870 : 0xffffff8006139127
0xffffff9124e7b970 : 0xffffff800613950b
0xffffff9124e7b9c0 : 0xffffff80068d17f9
0xffffff9124e7ba30 : 0xffffff8006262e0a
0xffffff9124e7bbb0 : 0xffffff8006262b08
0xffffff9124e7bc00 : 0xffffff80060e0a40
0xffffff9124e7bc20 : 0xffffff7f8998c7ce
0xffffff9124e7bd20 : 0xffffff7f8998c916
0xffffff9124e7bd40 : 0xffffff7f89980531
0xffffff9124e7bd60 : 0xffffff7f8998044f
0xffffff9124e7bd80 : 0xffffff7f8995e45d
0xffffff9124e7bdb0 : 0xffffff7f8995c92b
0xffffff9124e7bde0 : 0xffffff800681a336
0xffffff9124e7be40 : 0xffffff8006819ee1
0xffffff9124e7bef0 : 0xffffff800681922e
0xffffff9124e7bf50 : 0xffffff800681b9cd
0xffffff9124e7bfa0 : 0xffffff80060e013e
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelSKLGraphics(14.0.2)[11074779-5CB6-3C9C-98F4-7F745CDCFDE0]@0xffffff7f89951000->0xffffff7f89a43fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[AA7C7A4F-9F5D-3533-9E78-177C3B6A72BF]@0xffffff7f86ea2000
            dependency: com.apple.iokit.IOSurface(269.6)[39DC4195-B168-3895-ACD5-E731581855F8]@0xffffff7f877e7000
            dependency: com.apple.iokit.IOGraphicsFamily(568)[247C211E-C250-351C-BCE2-4DB9D3003E10]@0xffffff7f8935f000
            dependency: com.apple.iokit.IOAcceleratorFamily2(438.2.7)[72B8A0B5-E12C-3764-9187-0AC0E93416F9]@0xffffff7f893b0000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 nv_disable=1 -v

Mac OS version:
19B88

Kernel version:
Darwin Kernel Version 19.0.0: Thu Oct 17 16:17:15 PDT 2019; root:xnu-6153.41.3~29/RELEASE_X86_64
Kernel UUID: 7503CD47-851F-321E-8747-50DB4299165F
Kernel slide:     0x0000000005e00000
Kernel text base: 0xffffff8006000000
__HIB  text base: 0xffffff8005f00000
System model name: iMac17,1 (Mac-B809C3757DA9BB8D)
System shutdown begun: NO
Panic diags file available: YES (0x0)

System uptime in nanoseconds: 173374690057
last loaded kext at 79505135625: >!AGraphicsDevicePolicy    4.5.9 (addr 0xffffff7f89c03000, size 86016)
last unloaded kext at 62534305083: >!A!ILpssGspi    3.0.60 (addr 0xffffff7f8847b000, size 45056)
loaded kexts:
com.insanelymac.RealtekRTL8111    2.3.0d7
com.rehabman.driver.USBInjectAll    0.7.1
org.netkas.driver.FakeSMC    1800
>!AGraphicsDevicePolicy    4.5.9
@AGDCPluginDisplayMetrics    4.5.9
>!AHV    1
|IOUserEthernet    1.0.1
|IO!BSerialManager    7.0.1f1
>!AUpstreamUserClient    3.6.8
>!AMCCSControl    1.13
>AGPM    111.2.5
>X86PlatformShim    1.0.0
>!APlatformEnabler    2.7.0d0
>pmtelemetry    1
>!AHDAHardwareConfigDriver    283.14
>!A!ISKLGraphics    14.0.2
@Dont_Steal_Mac_OS_X    7.0.0
>!AHDA    283.14
>!A!IPCHPMC    2.0.1
>ACPI_SMC_PlatformPlugin    1.0.0
>!A!ISKLGraphicsFramebuffer    14.0.2
>!AFIVRDriver    4.1.0
>!A!ISlowAdaptiveClocking    4.0.0
@filesystems.autofs    3.0
@filesystems.ntfs    3.14.3
@fileutil    20.036.15
@filesystems.apfs    1412.41.1
>!AVirtIO    1.0
@filesystems.hfs.kext    522.0.9
@!AFSCompression.!AFSCompressionTypeDataless    1.0.0d1
@BootCache    40
@!AFSCompression.!AFSCompressionTypeZlib    1.0.0
>!AAHCIPort    341.0.2
@private.KextAudit    1.0
>!ARTC    2.0
>!AACPIButtons    6.1
>!AHPET    1.8
>!ASMBIOS    2.1
>!AAPIC    1.7
$!AImage4    1
@nke.applicationfirewall    303
$TMSafetyNet    8
@!ASystemPolicy    2.0.0
|EndpointSecurity    1
>!AGraphicsControl    4.5.9
|IOAVB!F    800.17
>!ASSE    1.0
|IO!B!F    7.0.1f1
|IO!BPacketLogger    7.0.1f1
>!ASMBus!C    1.0.18d1
|IOSMBus!F    1.1
>DspFuncLib    283.14
@kext.OSvKernDSPLib    529
|IONDRVSupport    568
>IOPlatformPluginLegacy    1.0.0
@!AGPUWrangler    4.5.9
>!AHDA!C    283.14
|IOHDA!F    283.14
|IOAudio!F    300.2
>!A!ILpssGspi    3.0.60
>usb.IOUSBHostHIDDevice    1.2
>!ASMBusPCI    1.0.14d1
@!AGraphicsDeviceControl    4.5.9
|IOAccelerator!F2    438.2.7
|IOGraphics!F    568
>X86PlatformPlugin    1.0.0
>IOPlatformPlugin!F    6.0.0d8
|IOSlowAdaptiveClocking!F    1.0.0
@plugin.IOgPTPPlugin    810.1
|IOEthernetAVB!C    1.1.0
|IOSkywalk!F    1
@kext.triggers    1.0
|IOAHCIBlock!S    316.40.3
@vecLib.kext    1.2.0
>usb.networking    5.0.0
>usb.!UHostCompositeDevice    1.2
>usb.!UHub    1.2
|IOSerial!F    11
|IOSurface    269.6
@filesystems.hfs.encodings.kext    1
|IOAHCI!F    290.0.1
>usb.!UXHCIPCI    1.2
>usb.!UXHCI    1.2
>usb.!UHostPacketFilter    1.0
|IOUSB!F    900.4.2
>!AEFINVRAM    2.1
>!AEFIRuntime    2.1
|IOHID!F    2.0.0
$quarantine    4
$sandbox    300.0
@kext.!AMatch    1.0.0d1
>DiskImages    493.0.0
>!AFDEKeyStore    28.30
>!AEffaceable!S    1.0
>!AKeyStore    2
>!UTDM    489.41.1
|IOSCSIBlockCommandsDevice    422.0.2
>!ACredentialManager    1.0
>KernelRelayHost    1
>!ASEPManager    1.0.1
>IOSlaveProcessor    1
|IOUSBMass!SDriver    157.40.7
|IOSCSIArchitectureModel!F    422.0.2
|IO!S!F    2.1
|IOUSBHost!F    1.2
>!UHostMergeProperties    1.2
>usb.!UCommon    1.0
>!ABusPower!C    1.0
|CoreAnalytics!F    1
>!AMobileFileIntegrity    1.0.5
@kext.CoreTrust    1
|IOTimeSync!F    810.1
|IONetworking!F    3.4
|IOReport!F    47
>!AACPIPlatform    6.1
>!ASMC    3.1.9
>watchdog    1
|IOPCI!F    2.9
|IOACPI!F    1.4
@kec.pthread    1
@kec.corecrypto    1.0
@kec.Libm    1

 

Sure thing.  Here is the complete log:

 

panic(cpu 3 caller 0xffffff800f1937e5): ""@/System/Volumes/Data/SWE/macOS/BuildRoots/15c9597e6e/Library/Caches/com.apple.xbs/Sources/xnu/xnu-7195.141.46/osfmk/corecrypto/cc_abort.c:50
Backtrace (CPU 3), Frame : Return Address
0xffffffa09333b460 : 0xffffff800f08821d mach_kernel : _handle_debugger_trap + 0x3fd
0xffffffa09333b4b0 : 0xffffff800f1d0bd3 mach_kernel : _kdp_i386_trap + 0x143
0xffffffa09333b4f0 : 0xffffff800f1c11ca mach_kernel : _kernel_trap + 0x55a
0xffffffa09333b540 : 0xffffff800f02ca2f mach_kernel : _return_from_trap + 0xff
0xffffffa09333b560 : 0xffffff800f087a3d mach_kernel : _DebuggerTrapWithState + 0xad
0xffffffa09333b680 : 0xffffff800f087d33 mach_kernel : _panic_trap_to_debugger + 0x273
0xffffffa09333b6f0 : 0xffffff800f89bc8a mach_kernel : _panic + 0x54
0xffffffa09333b760 : 0xffffff800f1937e5 mach_kernel : _cc_abort + 0x15
0xffffffa09333b770 : 0xffffff800f193e2b mach_kernel : _ccdrbg_factory_nisthmac + 0x63b
0xffffffa09333b780 : 0xffffff800f193b0b mach_kernel : _ccdrbg_factory_nisthmac + 0x31b
0xffffffa09333b830 : 0xffffff800f194e47 mach_kernel : _early_random + 0x307
0xffffffa09333b940 : 0xffffff800f0e3859 mach_kernel : _work_interval_port_type_render_server + 0xf89
0xffffffa09333b960 : 0xffffff800f0e3160 mach_kernel : _work_interval_port_type_render_server + 0x890
0xffffffa09333ba60 : 0xffffff800f0e64b6 mach_kernel : _work_interval_port_type_render_server + 0x3be6
0xffffffa09333baa0 : 0xffffff800f0d0982 mach_kernel : _thread_call_allocate_with_options + 0x32
0xffffffa09333bb50 : 0xffffff800f7f21bc mach_kernel : __ZN18IOTimerEventSource14setTimeoutFuncEv + 0xbc
0xffffffa09333bb70 : 0xffffff800f7f221e mach_kernel : __ZN18IOTimerEventSource4initEP8OSObjectPFvS1_PS_E + 0x1e
0xffffffa09333bb90 : 0xffffff800f7f314e mach_kernel : __ZN18IOTimerEventSource16timerEventSourceEP8OSObjectPFvS1_PS_E + 0x8e
0xffffffa09333bbc0 : 0xffffff8011fe958a com.apple.driver.usb.AppleUSBUHCI : __ZN21AppleUSBUHCIQueueHead33initWithControllerAndSharedMemoryEP12AppleUSBUHCIP19UHCIQueueHeadSharedy + 0x86
0xffffffa09333bbf0 : 0xffffff8011fe9332 com.apple.driver.usb.AppleUSBUHCI : __ZN21AppleUSBUHCIQueueHead29WithControllerAndSharedMemoryEP12AppleUSBUHCIP19UHCIQueueHeadSharedy + 0x62
0xffffffa09333bc30 : 0xffffff8011fe9024 com.apple.driver.usb.AppleUSBUHCI : __ZN25AppleUSBUHCIQueueHeadPool5getQHEhhhhthjt + 0xee
0xffffffa09333bc90 : 0xffffff8011fe8ef3 com.apple.driver.usb.AppleUSBUHCI : __ZN25AppleUSBUHCIQueueHeadPool28initWithControllerAndOptionsEP12AppleUSBUHCIj + 0x9b
0xffffffa09333bce0 : 0xffffff8011fe8e3d com.apple.driver.usb.AppleUSBUHCI : __ZN25AppleUSBUHCIQueueHeadPool24withControllerAndOptionsEP12AppleUSBUHCIj + 0x59
0xffffffa09333bd10 : 0xffffff8011feafdd com.apple.driver.usb.AppleUSBUHCI : __ZN12AppleUSBUHCI5startEP9IOService + 0x1e5
0xffffffa09333bd80 : 0xffffff8011ff9c17 com.apple.driver.usb.AppleUSBUHCIPCI : __ZN15AppleUSBUHCIPCI5startEP9IOService + 0x3b9
0xffffffa09333bdd0 : 0xffffff800f7c3d2b mach_kernel : __ZN9IOService14startCandidateEPS_ + 0xeb
0xffffffa09333be40 : 0xffffff800f7c38be mach_kernel : __ZN9IOService15probeCandidatesEP12OSOrderedSet + 0xcce
0xffffffa09333bef0 : 0xffffff800f7c2a5f mach_kernel : __ZN9IOService14doServiceMatchEj + 0x30f
0xffffffa09333bf50 : 0xffffff800f7c57d6 mach_kernel : __ZN15_IOConfigThread4mainEPvi + 0x186
0xffffffa09333bfa0 : 0xffffff800f02c13e mach_kernel : _call_continuation + 0x2e
      Kernel Extensions in backtrace:
         com.apple.driver.usb.AppleUSBUHCI(1.2)[DC795E3F-2357-3BA9-BDCA-B08D818E521E]@0xffffff8011fdf000->0xffffff8011ff3fff
            dependency: com.apple.driver.usb.AppleUSBCommon(1.0)[B52FCC8A-A083-367C-9DA9-C0567C86E7A5]@0xffffff80108a6000->0xffffff80108a9fff
            dependency: com.apple.driver.usb.AppleUSBEHCI(1.2)[A155A6A5-0D22-3FDC-8CD0-1C998867B83A]@0xffffff8011f2f000->0xffffff8011f6cfff
            dependency: com.apple.iokit.IOUSBHostFamily(1.2)[E9E2979C-5F4F-31F7-80AA-B28B877E9959]@0xffffff8011e8b000->0xffffff8011f19fff
         com.apple.driver.usb.AppleUSBUHCIPCI(1.2)[4F83C93D-A598-345E-B645-77FB367C5D58]@0xffffff8011ff9000->0xffffff8011ffbfff
            dependency: com.apple.driver.usb.AppleUSBCommon(1.0)[B52FCC8A-A083-367C-9DA9-C0567C86E7A5]@0xffffff80108a6000->0xffffff80108a9fff
            dependency: com.apple.driver.usb.AppleUSBEHCI(1.2)[A155A6A5-0D22-3FDC-8CD0-1C998867B83A]@0xffffff8011f2f000->0xffffff8011f6cfff
            dependency: com.apple.driver.usb.AppleUSBUHCI(1.2)[DC795E3F-2357-3BA9-BDCA-B08D818E521E]@0xffffff8011fdf000->0xffffff8011ff3fff
            dependency: com.apple.iokit.IOACPIFamily(1.4)[02870861-1FF3-39CF-85E0-04DC6D1AAE5D]@0xffffff8011645000->0xffffff8011646fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[3E5DA5CC-56D6-3481-9EA8-4DAAA0551243]@0xffffff8011b6d000->0xffffff8011b95fff
            dependency: com.apple.iokit.IOUSBHostFamily(1.2)[E9E2979C-5F4F-31F7-80AA-B28B877E9959]@0xffffff8011e8b000->0xffffff8011f19fff

Process name corresponding to current thread: kernel_task
Boot args: keepsyms=1 

Mac OS version:
Not yet set

Kernel version:
Darwin Kernel Version 20.6.0: Sun Nov  6 23:17:00 PST 2022; root:xnu-7195.141.46~1/RELEASE_X86_64
Kernel UUID: 68CA2B75-6148-38BC-BC33-38E18B20A8B1
KernelCache slide: 0x000000000ee00000
KernelCache base:  0xffffff800f000000
Kernel slide:      0x000000000ee10000
Kernel text base:  0xffffff800f010000
__HIB  text base: 0xffffff800ef00000
System model name: MacPro6,1 (Mac-F60**********CF6)
System shutdown begun: NO
Panic diags file unavailable, panic occurred prior to initialization
Hibernation exit count: 0

System uptime in nanoseconds: 438860557
Last Sleep:           absolute           base_tsc          base_nano
  Uptime  : 0x000000001a287f27
  Sleep   : 0x0000000000000000 0x0000000000000000 0x0000000000000000
  Wake    : 0x0000000000000000 0x000000041ecfcef0 0x0000000000000000
last started kext at 437378096: >!AFileSystemDriver	3.0.1 (addr 0xffffff801053a000, size 8192)
loaded kexts:
as.acidanthera.BrcmFirmwareStore	2.6.2
as.vit9696.!AALC	1.6.9
as.vit9696.WhateverGreen	1.5.7
as.vit9696.Lilu	1.6.0
>!AFileSystemDriver	3.0.1
@filesystems.tmpfs	1
>!AAHCIPort	346.100.2
@filesystems.hfs.kext	556.100.12
@BootCache	40
@!AFSCompression.!AFSCompressionTypeZlib	1.0.0
@!AFSCompression.!AFSCompressionTypeDataless	1.0.0d1
@private.KextAudit	1.0
>!AACPIButtons	6.1
>!ARTC	2.0
>!ASMBIOS	2.1
>!AAPIC	1.7
@!ASystemPolicy	2.0.0
@nke.applicationfirewall	311
|IOKitRegistryCompatibility	1
|EndpointSecurity	1
>!ABSDKextStarter	3
|IOSurface	290.8.1
|IOSkywalk!F	1
>mDNSOffloadUserClient	1.0.1b8
|IOAHCI!F	294.100.1
>usb.!UUHCIPCI	1.2
>usb.!UUHCI	1.2
>usb.!UEHCIPCI	1.2
>usb.!UEHCI	1.2
>!AVirtIO	74.120.4
|IOSerial!F	11
@filesystems.hfs.encodings.kext	1
>usb.!UHostPacketFilter	1.0
|IOUSB!F	900.4.2
>!AEFINVRAM	2.1
>!AEFIRuntime	2.1
|IOHID!F	2.0.0
$!AImage4	3.0.0
|IOTimeSync!F	985.2
|IONetworking!F	3.4
>DiskImages	493.0.0
|IO!B!F	8.0.5d7
|IOReport!F	47
|IO!BPacketLogger	8.0.5d7
$quarantine	4
$sandbox	300.0
@kext.!AMatch	1.0.0d1
|CoreAnalytics!F	1
>!ASSE	1.0
>!AKeyStore	2
>!UTDM	511.141.1
|IOUSBMass!SDriver	184.140.2
|IOSCSIBlockCommandsDevice	436.140.1
|IO!S!F	2.1
|IOSCSIArchitectureModel!F	436.140.1
>!AMobileFileIntegrity	1.0.5
@kext.CoreTrust	1
>!AFDEKeyStore	28.30
>!AEffaceable!S	1.0
>!ACredentialManager	1.0
>KernelRelayHost	1
|IOUSBHost!F	1.2
>!UHostMergeProperties	1.2
>usb.!UCommon	1.0
>!ABusPower!C	1.0
>!ASEPManager	1.0.1
>IOSlaveProcessor	1
>!AACPIPlatform	6.1
>!ASMC	3.1.9
|IOPCI!F	2.9
|IOACPI!F	1.4
>watchdog	1
@kec.pthread	1
@kec.corecrypto	11.1
@kec.Libm	1

 

Edited January 9, 20233 yr by daddintech

Hi all,

 

I set up a Mojave VM using macinabox, and it all works when the base installation. However, VNC is slow, so I thought I could pass through my Intel HD Graphics 530. I replaced VNC with this iGPU, but it gets stuck in boot loops. I tried adding it as a second GPU as well so I could see via VNC what was going on, and saw it just gets stuck with boot loops, saying error. Does anyone know how I can successfully passthrough my Intel HD Graphics GPU so I can make Mac screen share from my other laptops a better user experience?

 

Thanks

Edited January 13, 20233 yr by rvijay007

Has anyone played with docker-OSX?

 

This would run much better as a docker with shared resources etc.

 

https://hub.docker.com/r/sickcodes/docker-osx

 

I'm still learning how to add a custom docker

 

Hope to have it up and running soon on unraid

Edited January 10, 20233 yr by dopeytree

On 1/9/2023 at 7:49 AM, ghost82 said:

mmm I don't know, can you paste the full backtrace?

Once you reboot a window should popup, click on show details and paste all here, it should be something like this:
 

 

Well, I decided to delete this VM install, manually remove any traces of the VM install (e.g. img files, ovmf files, scripts, etc.), and then reinstall the Big Sur VM.  Everything works like a charm now!  Couldn't be happier!  Sorry for the wild goose chase, but problem was solved with a reinstall.  Thanks for your help as it was much appreciated!

Hi everyone, anybody of you have a working open core for Ventura , i tried to use the one i use for my hackintosh but is not working 

@SpaceInvaderOne Hi sir! Have you made an updated video for installing Macinabox? I tried following your old video, but some things have changed it seems and every guide I find and try to follow, it seems like I always get an error. Was just curious if you had a new updated video or plan on making one? Thanks for all of your videos as well! You are a true rockstar!!! I always recommend your videos to my friends for anything regarding Unraid, and I have watched a lot of them to find out how to do certain things! 

Thanks again for all you do!!

I searched quite a bit for a solution so as to not post something that was mentioned before but I had no luck.

 

I just stood up a Macinabox and messed it up so I wanted to remove it and start over. However, I cannot remove the VM. I know that there are steps to remove a Macinabox but I couldn't figure it out. 

 

Thoughts?

I ran into that. I found it you edit the vm by adding some cpu cores or other things then save it. It should then let you delete it.

Hi guys,

 

I looked the video from the first post and did the same steps.

I didn't change anything except the logical CPUs.

Unfortunately I always get a reboot.

Do you have a hint for me where my fault is?

Thank you.

 

 

On 1/28/2023 at 8:37 AM, Thomas_H said:

Hi guys,

 

I looked the video from the first post and did the same steps.

I didn't change anything except the logical CPUs.

Unfortunately I always get a reboot.

Do you have a hint for me where my fault is?

Thank you.

 

 

did you rerun the macinabox script after changing the VM definition with your new logical cores?

16 hours ago, rvijay007 said:

did you rerun the macinabox script after changing the VM definition with your new logical cores?

Yes, I did.

I also tried to remove everything and start from scratch.

But it is the same issue.

Here's my xml, perhaps it could be an indicator what I'm doing wrong.

 

<?xml version='1.0' encoding='UTF-8'?>
<domain type='kvm' id='6' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
  <name>Macinabox Monterey</name>
  <uuid>e8b63d07-9f76-4af8-a93c-329c95d5a582</uuid>
  <description>MacOS Monterey</description>
  <metadata>
    <vmtemplate xmlns="unraid" name="Windows 10" icon="default.png" os="osx"/>
  </metadata>
  <memory unit='KiB'>4194304</memory>
  <currentMemory unit='KiB'>4194304</currentMemory>
  <memoryBacking>
    <nosharepages/>
  </memoryBacking>
  <vcpu placement='static'>4</vcpu>
  <cputune>
    <vcpupin vcpu='0' cpuset='2'/>
    <vcpupin vcpu='1' cpuset='8'/>
    <vcpupin vcpu='2' cpuset='4'/>
    <vcpupin vcpu='3' cpuset='10'/>
  </cputune>
  <resource>
    <partition>/machine</partition>
  </resource>
  <os>
    <type arch='x86_64' machine='pc-q35-4.2'>hvm</type>
    <loader readonly='yes' type='pflash'>/mnt/user/system/custom_ovmf/Macinabox_CODE-pure-efi.fd</loader>
    <nvram>/etc/libvirt/qemu/nvram/e8b63d07-9f76-4af8-a93c-329c95d5a582_VARS-pure-efi.fd</nvram>
  </os>
  <features>
    <acpi/>
    <apic/>
  </features>
  <cpu mode='host-passthrough' check='none' migratable='on'>
    <topology sockets='1' dies='1' cores='2' threads='2'/>
    <cache mode='passthrough'/>
  </cpu>
  <clock offset='utc'>
    <timer name='rtc' tickpolicy='catchup'/>
    <timer name='pit' tickpolicy='delay'/>
    <timer name='hpet' present='no'/>
  </clock>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>restart</on_crash>
  <devices>
    <emulator>/usr/local/sbin/qemu</emulator>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw' cache='writeback'/>
      <source file='/mnt/user/domains/Macinabox Monterey/Monterey-opencore.img' index='3'/>
      <backingStore/>
      <target dev='hdc' bus='sata'/>
      <boot order='1'/>
      <alias name='sata0-0-2'/>
      <address type='drive' controller='0' bus='0' target='0' unit='2'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw' cache='writeback'/>
      <source file='/mnt/user/isos/Monterey-install.img' index='2'/>
      <backingStore/>
      <target dev='hdd' bus='sata'/>
      <alias name='sata0-0-3'/>
      <address type='drive' controller='0' bus='0' target='0' unit='3'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw' cache='writeback'/>
      <source file='/mnt/user/domains/Macinabox Monterey/macos_disk.img' index='1'/>
      <backingStore/>
      <target dev='hde' bus='virtio'/>
      <alias name='virtio-disk4'/>
      <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
    </disk>
    <controller type='usb' index='0' model='ich9-ehci1'>
      <alias name='usb'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci1'>
      <alias name='usb'/>
      <master startport='0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci2'>
      <alias name='usb'/>
      <master startport='2'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci3'>
      <alias name='usb'/>
      <master startport='4'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>
    </controller>
    <controller type='pci' index='0' model='pcie-root'>
      <alias name='pcie.0'/>
    </controller>
    <controller type='pci' index='1' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='1' port='0x10'/>
      <alias name='pci.1'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0' multifunction='on'/>
    </controller>
    <controller type='pci' index='2' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='2' port='0x11'/>
      <alias name='pci.2'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/>
    </controller>
    <controller type='pci' index='3' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='3' port='0x12'/>
      <alias name='pci.3'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/>
    </controller>
    <controller type='pci' index='4' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='4' port='0x13'/>
      <alias name='pci.4'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/>
    </controller>
    <controller type='virtio-serial' index='0'>
      <alias name='virtio-serial0'/>
      <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
    </controller>
    <controller type='sata' index='0'>
      <alias name='ide'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/>
    </controller>
    <interface type='bridge'>
      <mac address='52:54:00:d4:ec:ed'/>
      <source bridge='br0'/>
      <target dev='vnet5'/>
      <model type='virtio'/>
      <alias name='net0'/>
      <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
    </interface>
    <serial type='pty'>
      <source path='/dev/pts/3'/>
      <target type='isa-serial' port='0'>
        <model name='isa-serial'/>
      </target>
      <alias name='serial0'/>
    </serial>
    <console type='pty' tty='/dev/pts/3'>
      <source path='/dev/pts/3'/>
      <target type='serial' port='0'/>
      <alias name='serial0'/>
    </console>
    <channel type='unix'>
      <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-6-Macinabox Monterey/org.qemu.guest_agent.0'/>
      <target type='virtio' name='org.qemu.guest_agent.0' state='disconnected'/>
      <alias name='channel0'/>
      <address type='virtio-serial' controller='0' bus='0' port='1'/>
    </channel>
    <input type='tablet' bus='usb'>
      <alias name='input0'/>
      <address type='usb' bus='0' port='1'/>
    </input>
    <input type='mouse' bus='ps2'>
      <alias name='input1'/>
    </input>
    <input type='keyboard' bus='ps2'>
      <alias name='input2'/>
    </input>
    <graphics type='vnc' port='5903' autoport='yes' websocket='5703' listen='0.0.0.0' keymap='de'>
      <listen type='address' address='0.0.0.0'/>
    </graphics>
    <audio id='1' type='none'/>
    <video>
      <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/>
      <alias name='video0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/>
    </video>
    <memballoon model='virtio'>
      <alias name='balloon0'/>
      <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/>
    </memballoon>
  </devices>
  <seclabel type='dynamic' model='dac' relabel='yes'>
    <label>+0:+100</label>
    <imagelabel>+0:+100</imagelabel>
  </seclabel>
  <qemu:commandline>
    <qemu:arg value='-usb'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='usb-kbd,bus=usb-bus.0'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='************************'/>
    <qemu:arg value='-smbios'/>
    <qemu:arg value='type=2'/>
    <qemu:arg value='-cpu'/>
    <qemu:arg value='Penryn,kvm=on,vendor=GenuineIntel,+kvm_pv_unhalt,+kvm_pv_eoi,+hypervisor,+invtsc,+pcid,+ssse3,+sse4.2,+popcnt,+avx,+avx2,+aes,+fma,+fma4,+bmi1,+bmi2,+xsave,+xsaveopt,+rdrand,check'/>
  </qemu:commandline>
</domain>

 

Can't figure out how to get an Intel GPU to passthrough when I have a RTX 2070 GPU in the system also. Everytime I start the VM with "Intel UHD Graphics 630" selected for the Graphics card, my VM never starts or rather I don't know that it does. I have TeamViewer installed which would let me know so I can remote in, but it never lets me.

 

Was anyone able to get Intel UHD graphics passed through? More specifically a Intel i5-10400? Or maybe if anyone can help me figure out how to do it with some steps?

Hello has anyone gotten iservices to work using macinabox?

I am able to install and boot BigSur properly.
However, I am unable to log imessage.

I've followed this guide: https://dortania.github.io/OpenCore-Post-Install/universal/iservices.html#using-gensmbios

I'm using a macmini8,1 smbios and generated a new serial (validated does not match an existing mac)
I've updated my eth MAC to match an apple network card (updated opencore plist ROM values as well)
Confirmed my en0 shows as builtin using hackintool

The one thing I cant get to work is my nvram, setting a varable will not persist after a reboot.
Host machine is i7-8700K in a ROG STRIX Z370-E

To resolve I've tried 

an emulated NVRAM: https://dortania.github.io/OpenCore-Post-Install/misc/nvram.html
But when I run the logouthook script I get this error:

 

And on boot I get this Emulated NVRAM load failed error

 

 

Then I went back to try to fix the virtual "real" nvram with this guide, which still didnt solve my problem

https://dortania.github.io/Getting-Started-With-ACPI/Universal/nvram.html
https://elitemacx86.com/threads/how-to-enable-nvram-clover-opencore.577/

I've been at this for many many hours any help is appreciated.

Edited February 4, 20233 yr by yousefmansy1

I had some problems near the end of this install, with Open Configurator. I got an error message when I ran the program:

 

 

I'm not sure the right volume was there for the EFI mount, and one of the files was missing

 

 

Just want to be sure I don't gloss over anything that will trip me up here. It's a little different from Spacedinvader's video.

Hi All

Anyone know why my Monterey isnt downloading fully?

 

Here is the log from docker, iso file is always 2.56GB !!!! 

 

 

text  error  warn  system  array  login  

replace /userscripts/__MACOSX/1_macinabox_helper/._script? [y]es, [n]o, [A]ll, [N]one, [r]ename:  NULL
(EOF or read error, treating as "[N]one" ...)
replace /userscripts/__MACOSX/1_macinabox_vmready_notify/._script? [y]es, [n]o, [A]ll, [N]one, [r]ename:  NULL
(EOF or read error, treating as "[N]one" ...)
mkdir: created directory '/config/baseimage_temp'
continuing
I am going to download the Monterey recovery media. Please be patient!
.
.
1. High Sierra (10.13)
2. Mojave (10.14)
3. Catalina (10.15)
4. Big Sur (11.6) - RECOMMENDED
5. Monterey (latest)
Monterey (latest)
Downloading 012-88896...
Saving http://oscdn.apple.com/content/downloads/45/00/012-88896/c2ajx30evdcr4suhfoccu5udeyyvtw83pm/RecoveryImage/BaseSystem.dmg to BaseSystem.dmg...
Note: The total download size is 662.95 MB
Download complete!                                
Saving http://oscdn.apple.com/content/downloads/45/00/012-88896/c2ajx30evdcr4suhfoccu5udeyyvtw83pm/RecoveryImage/BaseSystem.chunklist to BaseSystem.chunklist...
Note: The total download size is 2704 bytes
Download complete!                                
.
.
mkdir: created directory '/config/autoinstall/'
mkdir: created directory '/domains/Macinabox Monterey'
I have created the Macinabox directories
.
.
Formatting '/domains/Macinabox Monterey/macos_disk.img', fmt=qcow2 size=107374182400 cluster_size=65536 lazy_refcounts=off refcount_bits=16
.
Created vdisk
.
.
Putting stock open core in the vm share
Archive:  /Macinabox/bootloader/OpenCore-v16.img.zip
  inflating: /config/OpenCore-v16.img  
Going with the default nic type for the macOS vm
macOS VM template generated and moved to server (You need to run macinabox_helper userscript)
.
.
Trying to add userscript
Archive:  /config/1_macinabox_helper.zip
   creating: /userscripts/1_macinabox_helper/
  inflating: /userscripts/1_macinabox_helper/script  
  inflating: /userscripts/1_macinabox_helper/description  
  inflating: /userscripts/1_macinabox_helper/name  
Archive:  /config/1_macinabox_vmready_notify.zip
   creating: /userscripts/1_macinabox_vmready_notify/
  inflating: /userscripts/1_macinabox_vmready_notify/script  
  inflating: /userscripts/1_macinabox_vmready_notify/name  
Injected macinabox helper and notify userscript into user script plugins and a copy of macinabox helper and notify script has been put in appdata

Summary of what has been done

.
.
The reference /domains below refers to where you mapped that folder in the docker template on your server 
(normally to /mnt/user/domains)
.
.
MacOS install media was put in your Unraid isos share named Monterey-install.img
.
.
A  Vdisk of 100G was created in /domains/Macinabox Monterey 
.
.
OpenCore bootloader image named Monterey-opencore.img was put in your Unraid vm share in the folder named Monterey
.
.
Custom ovmf files are in /mnt/user/system/custom_ovmf
.
.
XML template file for the vm is ready for install with macinabox helper user script.
Note  This file assumes your vm share is the default location /mnt/user/domains
If it isnt you will need to change the locations accordingly after in unraid vm manager before running vm
A copy of the macinabox helper user script was placed in /mnt/user/appdata/macinabox
.
.
OK process is now complete 

** Press ANY KEY to close this window ** 

Not seeing any error and the size seems right?

isnt it suppose to be 15gigs?
When  i start the VM, it starts as the apple logo, loads half way then it reboots itself, like in a loop!

eDit: it loads up to option menu where it shows macos base system, uefi and reset nvram. I press on macos base system, it loads a quarter way then errors out and resets to the option menu again!

Edit2: logs of VM shows 2023-02-10T10:14:53.445182Z qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.80000001H:ECX.fma4 [bit 16]

Edited February 10, 20233 yr by aymanibousi

Yeah it's surprisingly small, but same here and worked fine. Seems to be a CPU compatibility issue?

Any ideas how to fix. I have an i7 8700k CPU. 

The Montery download is now forwarded to Ventura. Or that is what was happening to me.

Hoping someone might be able to help. I have installed Big Sur using the video instructions and it boots up and works well with VNC.

 

I have been trying to setup passthrough of a 580x for the past few weeks and have had no luck but I feel like I am making progress and am likely close to making it work. Hardware is Asrock x399 Tiachi, Threadripper 1900x. IOMMU and other virtualization features are turned on in the BIOS.

 

I have also enabled the PCIe overide and VFIO unsafe interrupts (both). Seems to be necessary.

 

The GPU (video/audio) is binded to VFIO.

 

I can pass the graphics card through to a Windows 10 VM.

 

I am using the vBIOS for my card here: https://www.techpowerup.com/vgabios/194686/dell-rx580-8192-170301

 

When I try to pass the 580x through to my Mac VM, it hangs on the Mac loading screen at about 25%.

 

My xml is below, hopefully someone knows how to fix this, I am at a bit of a loss:

 

<?xml version='1.0' encoding='UTF-8'?>
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
  <name>Macinabox BigSur</name>
  <uuid>d28b8bc3-bb06-4370-abf5-66a3bb821127</uuid>
  <description>MacOS Big Sur</description>
  <metadata>
    <vmtemplate xmlns="unraid" name="Windows 10" icon="default.png" os="osx"/>
  </metadata>
  <memory unit='KiB'>16777216</memory>
  <currentMemory unit='KiB'>16777216</currentMemory>
  <memoryBacking>
    <nosharepages/>
  </memoryBacking>
  <vcpu placement='static'>8</vcpu>
  <cputune>
    <vcpupin vcpu='0' cpuset='1'/>
    <vcpupin vcpu='1' cpuset='9'/>
    <vcpupin vcpu='2' cpuset='3'/>
    <vcpupin vcpu='3' cpuset='11'/>
    <vcpupin vcpu='4' cpuset='5'/>
    <vcpupin vcpu='5' cpuset='13'/>
    <vcpupin vcpu='6' cpuset='7'/>
    <vcpupin vcpu='7' cpuset='15'/>
  </cputune>
  <resource>
    <partition>/machine</partition>
  </resource>
  <os>
    <type arch='x86_64' machine='pc-q35-4.2'>hvm</type>
    <loader readonly='yes' type='pflash'>/mnt/user/system/custom_ovmf/Macinabox_CODE-pure-efi.fd</loader>
    <nvram>/etc/libvirt/qemu/nvram/d28b8bc3-bb06-4370-abf5-66a3bb821127_VARS-pure-efi.fd</nvram>
  </os>
  <features>
    <acpi/>
    <apic/>
  </features>
  <cpu mode='host-passthrough' check='none' migratable='on'>
    <topology sockets='1' dies='1' cores='4' threads='2'/>
    <cache mode='passthrough'/>
    <feature policy='require' name='topoext'/>
  </cpu>
  <clock offset='utc'>
    <timer name='rtc' tickpolicy='catchup'/>
    <timer name='pit' tickpolicy='delay'/>
    <timer name='hpet' present='no'/>
  </clock>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>restart</on_crash>
  <devices>
    <emulator>/usr/local/sbin/qemu</emulator>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw' cache='writeback'/>
      <source file='/mnt/cache/VM/Macinabox BigSur/macos_disk.img'/>
      <target dev='hdc' bus='sata'/>
      <boot order='1'/>
      <address type='drive' controller='0' bus='0' target='0' unit='2'/>
    </disk>
    <controller type='pci' index='0' model='pcie-root'/>
    <controller type='pci' index='1' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='1' port='0x8'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' multifunction='on'/>
    </controller>
    <controller type='pci' index='2' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='2' port='0x9'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
    </controller>
    <controller type='pci' index='3' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='3' port='0xb'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x3'/>
    </controller>
    <controller type='pci' index='4' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='4' port='0x13'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/>
    </controller>
    <controller type='pci' index='5' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='5' port='0xa'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
    </controller>
    <controller type='pci' index='6' model='pcie-to-pci-bridge'>
      <model name='pcie-pci-bridge'/>
      <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
    </controller>
    <controller type='virtio-serial' index='0'>
      <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
    </controller>
    <controller type='sata' index='0'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/>
    </controller>
    <controller type='usb' index='0' model='ich9-ehci1'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci1'>
      <master startport='0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci2'>
      <master startport='2'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci3'>
      <master startport='4'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>
    </controller>
    <interface type='bridge'>
      <mac address='52:54:00:57:6d:8b'/>
      <source bridge='br0'/>
      <model type='e1000-82545em'/>
      <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
    </interface>
    <serial type='pty'>
      <target type='isa-serial' port='0'>
        <model name='isa-serial'/>
      </target>
    </serial>
    <console type='pty'>
      <target type='serial' port='0'/>
    </console>
    <channel type='unix'>
      <target type='virtio' name='org.qemu.guest_agent.0'/>
      <address type='virtio-serial' controller='0' bus='0' port='1'/>
    </channel>
    <input type='tablet' bus='usb'>
      <address type='usb' bus='0' port='1'/>
    </input>
    <input type='mouse' bus='ps2'/>
    <input type='keyboard' bus='ps2'/>
    <graphics type='vnc' port='-1' autoport='yes' websocket='-1' listen='0.0.0.0' keymap='en-us'>
      <listen type='address' address='0.0.0.0'/>
    </graphics>
    <audio id='1' type='none'/>
    <video>
      <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0' multifunction='on'/>
    </video>
    <hostdev mode='subsystem' type='pci' managed='yes'>
      <driver name='vfio'/>
      <source>
        <address domain='0x0000' bus='0x41' slot='0x00' function='0x0'/>
      </source>
      <rom file='/mnt/cache/VM/Macinabox BigSur/Dell.RX580.8192.170301.rom'/>
      <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0' multifunction='on'/>
    </hostdev>
    <hostdev mode='subsystem' type='pci' managed='yes'>
      <driver name='vfio'/>
      <source>
        <address domain='0x0000' bus='0x41' slot='0x00' function='0x1'/>
      </source>
      <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x1'/>
    </hostdev>
    <memballoon model='none'/>
  </devices>
  <seclabel type='dynamic' model='dac' relabel='yes'/>
  <qemu:commandline>
    <qemu:arg value='-usb'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='usb-kbd,bus=usb-bus.0'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='************************'/>
    <qemu:arg value='-smbios'/>
    <qemu:arg value='type=2'/>
    <qemu:arg value='-cpu'/>
    <qemu:arg value='Penryn,kvm=on,vendor=GenuineIntel,+kvm_pv_unhalt,+kvm_pv_eoi,+hypervisor,+invtsc,+pcid,+ssse3,+sse4.2,+popcnt,+avx,+avx2,+aes,+fma,+fma4,+bmi1,+bmi2,+xsave,+xsaveopt,+rdrand,check'/>
  </qemu:commandline>
</domain>