Jump to content
SpaceInvaderOne

[Support] SpaceinvaderOne - Macinabox

594 posts in this topic Last Reply

Recommended Posts

 

59 minutes ago, Mason736 said:

Its still broken, just tried to install a new Catalina image.

I just setup catalina and it worked fine. Getting screwed up video w/ VNC after I upped it to 6 cores though...

Share this post


Link to post

Update, its working.  My mistake, I deleted the docker, for some reason the image file was still there.  After I removed the image fine, and reinstalled the docker, its working.

Share this post


Link to post
1 hour ago, r8z0r1 said:

Hi, installed successfully however when I come to start the VM I get the following message:

 

image.png.b461bebce53b0e12d21fa8a4f4f70f30.png

Changing `/boot/config/network.cfg` to `/boot/config/network.cfg.bak` on the flash drive worked for me.

Share this post


Link to post

I've been unsuccessful in passing through a 1070ti to a High Sierra install via this docker. 

 

Can anyone who has successfully done this with an NVIDIA card let me know what you've done with Clover Configurator to get this working?

 

I've:

  • Installed remote software
  • Opened Configurator and check NvidiaWeb, ensured I was using 14,1 Mac model
  • Used the script to install the drives as SpaceInvader suggested

...but the install still doesn't see the card. The NVIDIA software is there and the drivers are installed. 

 

I've had this card passed through to previous High Sierra installs using the "old school" SpaceInvader method, but I can't get Macinabox working. 

Share this post


Link to post

I am unable to connect an iPhone to this VM. Everything else working. External HDD will connect. Only thing that will not connect is the iPhone. My iPhone DOES connect to a Windows 10 VM. Does anyone else experience this issue?

Share this post


Link to post

Hi all,

 

Fairly new to VMs in unraid. Thanks in advance for the help. 
 

Ive got a AMD wx5100 passed through, but it doesn’t display video. I haven’t changed any config or clover or anything. Is there a step by step of things I need to do to get this to display video? 
 

thanks again guys. 

Share this post


Link to post
On 3/15/2020 at 3:00 AM, wbsmolen said:

Just coming into this thread...is your bios resolution the same as clover? that's required.

 

vnc back into macOS, edit clover resolution to match your monitors NATIVE resolution (under gui section).

 

Hit esc rapidly while booting back up so you get into the OVMF menu and change target resolution to match.

Thanks for the feedback.

Am I in the right place to set the resolution in Clover?

 

image.thumb.png.5d1502c2a463f4584cfc7e94917b2553.png

Edited by newmember

Share this post


Link to post

hi, thank you for this tutorial video, the os mac Catalina is working fine when select video type vnc if i want to change the video type to local cart type NVIDIA GeForce GTX 1060 3GB (01:00.0) the os mac not work i remove the cpu passthrough , so this the xml file for vm can you check it please 

<?xml version='1.0' encoding='UTF-8'?>
<domain type='kvm'>
  <name>MacinaboxCatalina</name>
  <uuid>004233fd-da22-4162-8adc-71465284e8f3</uuid>
  <description>MacOS Catalina</description>
  <metadata>
    <vmtemplate xmlns="unraid" name="Windows 10" icon="default.png" os="Catalina"/>
  </metadata>
  <memory unit='KiB'>13107200</memory>
  <currentMemory unit='KiB'>8388608</currentMemory>
  <memoryBacking>
    <nosharepages/>
  </memoryBacking>
  <vcpu placement='static'>6</vcpu>
  <cputune>
    <vcpupin vcpu='0' cpuset='1'/>
    <vcpupin vcpu='1' cpuset='5'/>
    <vcpupin vcpu='2' cpuset='2'/>
    <vcpupin vcpu='3' cpuset='6'/>
    <vcpupin vcpu='4' cpuset='3'/>
    <vcpupin vcpu='5' cpuset='7'/>
  </cputune>
  <os>
    <type arch='x86_64' machine='pc-q35-3.1'>hvm</type>
    <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader>
    <nvram>/etc/libvirt/qemu/nvram/004233fd-da22-4162-8adc-71465284e8f3_VARS-pure-efi.fd</nvram>
  </os>
  <features>
    <acpi/>
    <apic/>
  </features>
  <cpu mode='host-passthrough' check='none'>

  </cpu>
  <clock offset='utc'>
    <timer name='rtc' tickpolicy='catchup'/>
    <timer name='pit' tickpolicy='delay'/>
    <timer name='hpet' present='no'/>
  </clock>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>restart</on_crash>
  <devices>
    <emulator>/usr/local/sbin/qemu</emulator>
    <disk type='file' device='disk'>
      <driver name='qemu' type='qcow2' cache='writeback'/>
      <source file='/mnt/user/domains/MacinaboxCatalina/Clover.qcow2'/>
      <target dev='hdc' bus='sata'/>
      <boot order='1'/>
      <address type='drive' controller='0' bus='0' target='0' unit='2'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw' cache='writeback'/>
      <source file='/mnt/user/domains/MacinaboxCatalina/Catalina-install.img'/>
      <target dev='hdd' bus='sata'/>
      <address type='drive' controller='0' bus='0' target='0' unit='3'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='qemu' type='raw' cache='writeback'/>
      <source file='/mnt/user/domains/MacinaboxCatalina/macos_disk.img'/>
      <target dev='hde' bus='sata'/>
      <address type='drive' controller='0' bus='0' target='0' unit='4'/>
    </disk>
    <controller type='usb' index='0' model='ich9-ehci1'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci1'>
      <master startport='0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci2'>
      <master startport='2'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1' multifunction='on'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci3'>
      <master startport='4'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>
    </controller>
    <controller type='pci' index='3' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='3' port='0x12'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/>
    </controller>
    <controller type='pci' index='4' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='4' port='0x13'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/>
    </controller>
    <controller type='virtio-serial' index='0'>
      <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
    </controller>
    <controller type='sata' index='0'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/>
    </controller>
    <controller type='pci' index='0' model='pcie-root'/>
    <controller type='pci' index='1' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='1' port='0x8'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' multifunction='on'/>
    </controller>
    <controller type='pci' index='2' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='2' port='0x9'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
    </controller>
    <interface type='bridge'>
      <mac address='52:54:00:ba:5e:56'/>
      <source bridge='br0'/>
      <model type='virtio'/>
      <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
    </interface>
    <serial type='pty'>
      <target type='isa-serial' port='0'>
        <model name='isa-serial'/>
      </target>
    </serial>
    <console type='pty'>
      <target type='serial' port='0'/>
    </console>
    <channel type='unix'>
      <target type='virtio' name='org.qemu.guest_agent.0'/>
      <address type='virtio-serial' controller='0' bus='0' port='1'/>
    </channel>
    <input type='tablet' bus='usb'>
      <address type='usb' bus='0' port='1'/>
    </input>
    <input type='mouse' bus='ps2'/>
    <input type='keyboard' bus='ps2'/>
    <hostdev mode='subsystem' type='pci' managed='yes'>
      <driver name='vfio'/>
      <source>
        <address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
      </source>
      <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
    </hostdev>
    <hostdev mode='subsystem' type='usb' managed='no'>
      <source>
        <vendor id='0x046d'/>
        <product id='0xc534'/>
      </source>
      <address type='usb' bus='0' port='2'/>
    </hostdev>
    <hostdev mode='subsystem' type='usb' managed='no'>
      <source>
        <vendor id='0x24ae'/>
        <product id='0x6000'/>
      </source>
      <address type='usb' bus='0' port='3'/>
    </hostdev>
    <memballoon model='none'/>
  </devices>
</domain>

 

Share this post


Link to post
2 hours ago, YaserGh said:

NVIDIA GeForce GTX 1060

There are no web drivers for 10series cards for catalina available and propably never will be. Last MacOS with support for Nvidia cards is High Sierra. 😒

Share this post


Link to post
1 hour ago, bastl said:

There are no web drivers for 10series cards for catalina available and propably never will be. Last MacOS with support for Nvidia cards is High Sierra. 😒

Thank you my dear,

Share this post


Link to post

hello everyone

 

i installed catalina on a nuc8i3beh

 

eveything work fine except appleid and adding more ram: https://d.pr/i/JkQkCJ

 

i tried the instructions in youtube video to modify xml, when i do this, my screen bug on relaunch/startup with multiple apple

 

if anybody have an idea

 

thanks in advance

Share this post


Link to post
18 hours ago, newmember said:

Thanks for the feedback.

Am I in the right place to set the resolution in Clover?

 

image.thumb.png.5d1502c2a463f4584cfc7e94917b2553.png

No. Force stop and then start the vm. hit esc rapidly on the bios boot logo screen to open bios settings. from there, go to device manager and change ovmf's resolution to match clover (1920x1080 default)

Share this post


Link to post

@neow scroll back to page 11 for screen fix info and you may need to change your network adapter to 'e1000-82545em' to get appleid working

Share this post


Link to post

hey

I really love this docker, but the problem is that I can't sign in with me apple id. I keep getting the error"There was an error connecting to the Apple ID server."

 

is there a way to let me login ?

Share this post


Link to post
9 hours ago, fr05ty said:

@neow scroll back to page 11 for screen fix info and you may need to change your network adapter to 'e1000-82545em' to get appleid working

hello thanks

 

first i tried 1000-82545em -> no network at all after this

then i looked at screen fix, this is way to much complicated for me but thank you sir

 

i will wait a macinabox for noob :)

Share this post


Link to post

All of a sudden my mouse don't work anymore through in the VNC/browser. I can use the keyboard, but mouse don't work (I can see the curser) It works perfect in my Windows VM.

 

Any ideas?

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.