SFF-8087 to SAS/SATA Cable


Recommended Posts

31 minutes ago, Spies said:

Tested a random cable I had in a Windows PC and the SSD max'd out at 250MB/s which indicates to me that the cable does affect the negotiated speed?

I use this cable from Amazon with my Dell H310 HBA.  It says up to 6 Gbps (SATA III), so, yes the cable can limit the speed.  The HBA you use as well as the PCIe revision will also factor into maximum speeds.

 

The H310 is PCIe 2.0 and lots of tests have shown that in an x8 slot the maximum actual throughput of PCIe 2.0 is around 3.2 GB/s so I can expect a maximum of 400 MB/s for each attached drive.  Obviously, that is more than enough for HDDs which is all I have attached to that controller.

 

You really want SSDs attached to MB SATA ports anyway and not HBAs as the MB ports support TRIM.  Most HBAs do not support TRIM except for on certain SSDs.  There are other discussions about the particulars in these forums.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.