jlficken Posted October 31, 2019 Share Posted October 31, 2019 (edited) I wanted change the IP of my server but I can't seem to get it to work. The new IP responds to pings and I can SSH into the machine but the web interface doesn't work nor do any services that run on it like Emby. If I change the reservation back to the old IP and reboot everything is fine. It's starting to drive me crazy. I have a Mellanon ConnectX-2 10Gb card in the system along with the onboard Intel NIC set up in a failover config with the 10Gb being NIC 1, the Intel NIC being NIC 2 and 3 and then the Mellanox bing NIC 4. Only the first 2 NIC's have cables attached. ETA: I've changed reservations on switches, other NAS devices, PC's, etc in the past and had no issues so I'm not sure what to look at. I do know that after changing the IP and rebooting the server is unable to connect to grab updates during the boot process. Edited October 31, 2019 by jlficken Quote Link to comment
Squid Posted October 31, 2019 Share Posted October 31, 2019 9 minutes ago, jlficken said: I can SSH into the machine but the web interface doesn't work nor do any services that run on it like Emby. From the command prompt, diagnostics and then post the file here Quote Link to comment
jlficken Posted October 31, 2019 Author Share Posted October 31, 2019 Would I be correct in thinking that I should set it back to the IP that it doesn't worth correctly with before posting this? Quote Link to comment
Squid Posted October 31, 2019 Share Posted October 31, 2019 Would depend on if you want the new IP to work or not. But, there's no point in posting the diagnostics from a working config. Quote Link to comment
jlficken Posted October 31, 2019 Author Share Posted October 31, 2019 I'd like it to work so I'll post it shortly. I have a process that's going to take about 3 minutes to finish and then I'll reboot. Quote Link to comment
jlficken Posted October 31, 2019 Author Share Posted October 31, 2019 It looks like it has the name tower now instead of FSNAS1U too. tower-diagnostics-20191030-2022.zip Quote Link to comment
John_M Posted October 31, 2019 Share Posted October 31, 2019 Presumably the <long-hash>.unraid.net FQDN still resolves to your original IP address. When you changed your IP address did you take any action to update the record on the unraid.net name server? 1 Quote Link to comment
John_M Posted October 31, 2019 Share Posted October 31, 2019 With the original IP address allocated to the server, if you go to Setup -> Management Access and turn on the GUI help, then scroll down to Use SSL/TLS you'll be able to read an explanation of the options. I don't wish to mess up my working systems but I should think you need to do something like this: Set Use SSL/TLS to No Delete the old certificate from the config/ssl/certs folder on the flash drive Change to the new IP address Reboot Access the GUI via http://<new IP address> Set Use SSL/TLS to Auto to provision a new certificate Wait for the DNS update to take place (30 seconds, or so) Log out Access the GUI via http://<new IP address> and check that it redirects to https://<long-hash>.unraid.net As I said, I haven't tested this but the worst it can do is not work. 1 Quote Link to comment
jlficken Posted October 31, 2019 Author Share Posted October 31, 2019 5 hours ago, John_M said: Presumably the <long-hash>.unraid.net FQDN still resolves to your original IP address. When you changed your IP address did you take any action to update the record on the unraid.net name server? I didn't do anything to address this. Didn't know I had to honestly as I'm not sure what it is for? I'll give your suggestion above this a try and see what happens. Thanks! Quote Link to comment
jlficken Posted October 31, 2019 Author Share Posted October 31, 2019 8 hours ago, John_M said: With the original IP address allocated to the server, if you go to Setup -> Management Access and turn on the GUI help, then scroll down to Use SSL/TLS you'll be able to read an explanation of the options. I don't wish to mess up my working systems but I should think you need to do something like this: Set Use SSL/TLS to No Delete the old certificate from the config/ssl/certs folder on the flash drive Change to the new IP address Reboot Access the GUI via http://<new IP address> Set Use SSL/TLS to Auto to provision a new certificate Wait for the DNS update to take place (30 seconds, or so) Log out Access the GUI via http://<new IP address> and check that it redirects to https://<long-hash>.unraid.net As I said, I haven't tested this but the worst it can do is not work. This worked great...thank you very much!!!!!! The only thing I had to do differently is I had to set "Use SSL/TLS" to "Yes" rather than "Auto" as "Auto" didn't turn SSL back on. I even rebooted it before trying "Yes" and "Auto" just never worked. How do I add to your reputation as it has been driving me crazy for over 2 weeks that I couldn't change my IP? Quote Link to comment
JonathanM Posted October 31, 2019 Share Posted October 31, 2019 1 minute ago, jlficken said: How do I add to your reputation On the post that helped you hover your mouse over the heart in the bottom right, then click the appropriate reaction. 1 Quote Link to comment
jlficken Posted October 31, 2019 Author Share Posted October 31, 2019 1 minute ago, jonathanm said: On the post that helped you hover your mouse over the heart in the bottom right, then click the appropriate reaction. I hovered over everything but that heart LOL. Thanks! 2 Quote Link to comment
John_M Posted October 31, 2019 Share Posted October 31, 2019 1 hour ago, jlficken said: I hovered over everything but that heart LOL. Thanks! And you gave your thanks to @jonathanm but I guess he deserves it more than me. Quote Link to comment
jlficken Posted October 31, 2019 Author Share Posted October 31, 2019 Just now, John_M said: And you gave your thanks to @jonathanm but I guess he deserves it more than me. I see a little trophy next to your post and his post where the heart was. Can there be only one post given thanks per topic? Sorry, I'm new to this forum style with thanks and likes and stuff. Quote Link to comment
John_M Posted October 31, 2019 Share Posted October 31, 2019 That's OK. The trophy means thanks for the help, the heart means you like or agree with a post, the smiley means you found it amusing. They each count one point and they're just a bit of fun, really. Don't feel bad, you got two smiles out of it. Quote Link to comment
jlficken Posted October 31, 2019 Author Share Posted October 31, 2019 Sounds good. Thanks again! Quote Link to comment
JonathanM Posted October 31, 2019 Share Posted October 31, 2019 15 minutes ago, jlficken said: Can there be only one post given thanks per topic? No, you added 2 points to @John_M and one point to me. I don't know what he's complaining about. 😀 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.