jeff.lebowski Posted November 13, 2019 Share Posted November 13, 2019 I asked about this before and there was no real solution, which is fine. But maybe there's a work around. Every so often, a UPS (Back-UPS ES 550) on one of my servers will go into fail mode. Constant tone on the device, is what I mean. I then have to stop the array, shutdown the server, then finally power down the UPS. I can wait a few seconds then press the button again. It powers up fine, and then I can power up the server. There must be a way to reboot the UPS without shutting down the server. Anyone? Quote Link to comment
John_M Posted November 13, 2019 Share Posted November 13, 2019 What does the manual say? Perhaps the constant tone means that the batteries need replacing. Quote Link to comment
Squid Posted November 13, 2019 Share Posted November 13, 2019 Or overload on the UPS Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.