November 15, 20196 yr Hey guys, I'm pretty new to unRAID and have so far been enjoying everything this offers. I've created a pretty good machine for what I need it for but the motherboard NICs are 10/100 and I just got in my shiny new dual gig nic. Not slowing down and finding out how to disable the onboard NICs (and realizing far later the X8SIL has issues presenting USB in time to get into the BIOS) I installed the nic to see if it would recognize it. TLDR; I was able to remove the onboard NICs with a moved jumper but now after creating br0 and br2 I noticed that my machine would boot fine but would not load the website page. I noticed that br2 had been set in the routing as primary but was no longer a thing because I disabled the onboard and the new adapter moved up to eth0 and 1. I mottled through and was able to remove the br2 designation on the network.cfg on the USB drive but now on the Dashboard I get this nice bleh of info under the Interface status. Almost as if somewhere else has not realized that br2 is gone. All the while unRAIDs config page is clean as a whistle. None of this could be handled by the gui. Any idea where to go to fix this? The cfg files on the USB drive have been removed/recreated, etc. Everything is working fine mind you it's just this stalactite on my pretty console... Edited November 15, 20196 yr by lync copy pasta issue
Archived
This topic is now archived and is closed to further replies.