Unraid Newbie Posted August 28, 2020 Share Posted August 28, 2020 (edited) On 8/28/2020 at 6:53 AM, BRiT said: Why? Is your server portable? Are you moving it around your house? wire up the whole network might be a easy job in most people here, a easy diy job, just punch a hole in the drywall, and you are half way done. but my apartment/flat is all concrete, it's a huge renovation job and impossible to do while living in it. i dont have a desk yet, all the space are taken up by the kids. except for my bedroom. things are just different on the other side of the world. : ( Edited August 29, 2020 by Unraid Newbie spelling Quote Link to comment
Unraid Newbie Posted August 28, 2020 Share Posted August 28, 2020 13 hours ago, Ellis34771 said: Just get a router in "repeater" mode. Plug your ethernet from your UNRAID server into the router. Now your server is wireless. ... and yes, it's slow as snot. sure, that works, but just saying ... having wifi enable will take unraid popularity to another level. Quote Link to comment
pras1011 Posted August 28, 2020 Share Posted August 28, 2020 (edited) Wifi 5 is awful for servers, however wifi 6 is fantastic. Very close to gigabit speeds. Edited August 28, 2020 by pras1011 Quote Link to comment
BRiT Posted August 28, 2020 Share Posted August 28, 2020 19 minutes ago, Unraid Newbie said: sure, that works, but just saying ... having wifi enable will take unraid popularity to another level. And the support issues will be exponentially expanded through the roof as every card seems to require its own driver and has its own set of quirks. 2 Quote Link to comment
gacpac Posted August 28, 2020 Share Posted August 28, 2020 And the support issues will be exponentially expanded through the roof as every card seems to require its own driver and has its own set of quirks.I don't see that happening soon either. The only way is for limetech to own the hardware and have more control like synology and WD does. But then that's why unraid is awesome, you can run it anywhere and do whatever you want.Would be nice they come up with some off the shelve setup for users who needs just that. But that ain't my caseSent from my Pixel 2 XL using Tapatalk Quote Link to comment
pras1011 Posted August 31, 2020 Share Posted August 31, 2020 Is limetech working on implementing wifi on unraid?Sent from my SM-G977B using Tapatalk Quote Link to comment
xanvincent Posted September 6, 2020 Share Posted September 6, 2020 On 8/27/2020 at 7:08 AM, Unraid Newbie said: i thought wifi is 2 times faster quote from a mid range wifi6 router web site: Ultra-fast Wi-Fi Speed – RT-AX3000 supports 160MHz bandwidth and 1024-QAM for dramatically faster wireless connections. With a total networking speed of about 3000Mbps — 574 Mbps on the 2.4GHz band and 2402 Mbps on the 5GHz band. 10gb for the whole netowork is just too damn expensive right now. You will never see 3000 Mbps on wifi 6 (ax) devices today. That's just marketing wank (they add all the 5GHz and 2.4GHz bands together, devices don't work that way). Fastest wifi6 speeds I've seen real-world was ~700Mbps, and that was achieved 5 ft away from the AP. Assuming your server doesn't sit next to your AP, there are other APs in your area (interference) and you have multiple other wifi devices on your network, you're gonna see a drop in that 700 number real fast. Wireless connections are also unreliable, dropped packets are pretty common, meaning data has to be resent, slowing your overall speeds. I get the want to have Unraid and wifi, I just wouldn't expect it to consistently and reliably approach gigabit ethernet speeds. By the time it does, 10 gig ethernet will be cheap like 1 gig is today. Quote Link to comment
pras1011 Posted September 6, 2020 Share Posted September 6, 2020 Maybe better support for USB3.0 as I remember my server refused to boot from USB3.0? (Will USB2.0 ports be removed from motherboards in the future?) Quote Link to comment
itimpi Posted September 6, 2020 Share Posted September 6, 2020 2 minutes ago, pras1011 said: Not sure what you mean by this? USB3 works fine as long as the the motherboard BIOS handles it properly. It is just that USB2 is recommended for the boot device as it has proved both more reliable, the devices tend to last longer (thought to be because they run cooler) and Unraid gets no speed advantage from a USB3 boot device as it runs from RAM after the initial boot. Quote Link to comment
gacpac Posted September 6, 2020 Share Posted September 6, 2020 You will never see 3000 Mbps on wifi 6 (ax) devices today. That's just marketing wank (they add all the 5GHz and 2.4GHz bands together, devices don't work that way). Fastest wifi6 speeds I've seen real-world was ~700Mbps, and that was achieved 5 ft away from the AP. Assuming your server doesn't sit next to your AP, there are other APs in your area (interference) and you have multiple other wifi devices on your network, you're gonna see a drop in that 700 number real fast. Wireless connections are also unreliable, dropped packets are pretty common, meaning data has to be resent, slowing your overall speeds. I get the want to have Unraid and wifi, I just wouldn't expect it to consistently and reliably approach gigabit ethernet speeds. By the time it does, 10 gig ethernet will be cheap like 1 gig is today.It's like wifi 5. I was going crazy of why I was copying so slow and all that. AC you connect at 400mbps with a compatible card and next to the router, plus having a ac1900. But in real world copying data that's around 30~40MB/sGigabit is 110~120MB/sThe benefit of wifi is that you can have multiple devices connected at good speed (faster than 100 mbps)My boss goes crazy sometimes and I have to keep explaining the same shit all the time. They expect to have 200mb up and down from an iPhone, inside a Mall.Sorry for the little rant at the end lolNote: mbps (megabits), Mbps (Megabytes) 1 Byte = 8 megabitSent from my Pixel 2 XL using Tapatalk 1 Quote Link to comment
danioj Posted September 14, 2020 Share Posted September 14, 2020 I’d love the ability to assign multiple networks to a single Docker container. The simplest use case involves pihole. Currently I run seperate instances of a pihole container for each of my VLANS. It would be great if I could just attach one container to each network and configure pihole to listen on all assigned interfaces. I’m pretty sure you can do it via the cli using ‘docker network connect <network> <container>‘ or something but it would be excellent to be able to do it in the GUI. Quote Link to comment
shadowbert Posted September 15, 2020 Share Posted September 15, 2020 For what it's worth, I meant to tick "snapshots" but I didn't see it until after I pressed submit. But yeah, +1 to that. 2 Quote Link to comment
Unraid Newbie Posted September 15, 2020 Share Posted September 15, 2020 On 9/7/2020 at 2:20 AM, gacpac said: It's like wifi 5. I was going crazy of why I was copying so slow and all that. AC you connect at 400mbps with a compatible card and next to the router, plus having a ac1900. But in real world copying data that's around 30~40MB/s Gigabit is 110~120MB/s The benefit of wifi is that you can have multiple devices connected at good speed (faster than 100 mbps) My boss goes crazy sometimes and I have to keep explaining the same shit all the time. They expect to have 200mb up and down from an iPhone, inside a Mall. Sorry for the little rant at the end lol Note: mbps (megabits), Mbps (Megabytes) 1 Byte = 8 megabit Sent from my Pixel 2 XL using Tapatalk yah... in real world ... wifi 6 is faster than 1gb ethernet. not 2x as advertise maybe 1.2x to 1.5x faster. but undoubtedly, it is faster. Quote Link to comment
jmfw Posted September 22, 2020 Share Posted September 22, 2020 Any chance we can get the kernels built with driver modules for TPMs? I use this to enable TPM passthrough windows VM for work and re-building the kernel after an update to support this will get old eventually Jake Quote Link to comment
Energen Posted September 23, 2020 Share Posted September 23, 2020 I don't see a current way of doing this, so.. the ability to check for updates on a single docker at a time would be nice. We shouldn't have to check 10-20-30 dockers at a time when you really only want to update one docker that's being worked on. Quote Link to comment
JonathanM Posted September 23, 2020 Share Posted September 23, 2020 4 hours ago, Energen said: you really only want to update one docker that's being worked on. On the docker tab advanced view you can force update any single container. 1 Quote Link to comment
Energen Posted September 24, 2020 Share Posted September 24, 2020 9 hours ago, jonathanm said: On the docker tab advanced view you can force update any single container. Good to know, don't think I've ever looked at the advanced view. However, the one shortcoming is that this would only apply if you actively knew there was an update. I guess you could go around in circles about the usefulness of the feature to force checking for updates rather than forcing an update. You either have reason to believe there is an update (so force update would suffice) or are randomly checking for single updates at a greater interval than, let's say, the CA Auto Update plugin. Small example that just so happens to have popped up right now........... Right now my FreshRSS docker is "up to date", and won't be checked until my scheduled update check time (CA Auto Update).. but my FreshRSS feed tells me that there has been a new version released as of this afternoon. So at this point I know there has been an update. I can 'force update' to "see" if the docker has been updated (a linuxserver docker, so maybe it hasn't pulled the update yet, who knows), or I can 'check for updates' to "know" if an update is available or not. If I don't know there's an update then no harm no foul, I don't know that I should even be checking for updates. I guess in the end the same thing is accomplished in either case, it's either updated or it's not. But it's 2020, every app in the world has a "check for updates" option so Unraid should have it too, for individual dockers! Quote Link to comment
tjb_altf4 Posted September 24, 2020 Share Posted September 24, 2020 10 hours ago, jonathanm said: On the docker tab advanced view you can force update any single container. In dashboard the update setting is always available too, unlike docker page where it relies on the context of an update being available. Quote Link to comment
yogy Posted October 4, 2020 Share Posted October 4, 2020 VM snapshots, please 1 Quote Link to comment
Squid Posted October 4, 2020 Share Posted October 4, 2020 On 9/23/2020 at 8:03 PM, tjb_altf4 said: In dashboard the update setting is always available too, unlike docker page where it relies on the context of an update being available. It shouldn't be 🤔 Quote Link to comment
tjb_altf4 Posted October 5, 2020 Share Posted October 5, 2020 (edited) 3 hours ago, Squid said: It shouldn't be 🤔 It's not a bug, it's a feature 😛 Edited October 5, 2020 by tjb_altf4 Quote Link to comment
High-Tower Posted October 5, 2020 Share Posted October 5, 2020 Please, a full integrated ZFS with full user access control in the surface area (click,click).... the plugin and the console commands is not really user friendly.... when that is integrated, Unraid is really the best programm on the market... 1 Quote Link to comment
sdamaged Posted October 16, 2020 Share Posted October 16, 2020 On 9/14/2020 at 5:14 AM, danioj said: I’d love the ability to assign multiple networks to a single Docker container. The simplest use case involves pihole. Currently I run seperate instances of a pihole container for each of my VLANS. It would be great if I could just attach one container to each network and configure pihole to listen on all assigned interfaces. I’m pretty sure you can do it via the cli using ‘docker network connect <network> <container>‘ or something but it would be excellent to be able to do it in the GUI. If you're using a Unifi system, you can just enable MDNS and have Pi-Hole work across all VLANs Quote Link to comment
RealActorRob Posted October 18, 2020 Share Posted October 18, 2020 Wish: 1. Writing incoming data to all drives at once for throughput then it collects the pieces and reassembles them on to the high water drive as it does now when the array is more idle. 2. Auto balancing of data across drives. Yes, I know there's a manual plugin. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.