6.8.0-rc9 Upgrade issues


z00100

Recommended Posts

So.......

I upgraded to 6.8.0-rc9 to test it out. I have a MSI Tomahawk B450Max motherboard and it seems that the NIC isn't picking up DHCP. It autoconfigures to 169.254.142.227.

Furthermore, the connectivity light on my switch is off for the port it's plugged into. Basically it seems the driver(s) for the NIC are not loading.

 

How can I either fix this or revert back to the older version?

 

/edit

The LAN chipset is:

Realtek® 8111H Gigabit LAN controller

 

Thanks!

Link to comment

Ideally you should have posted this to the thread for the RC9 release rather than in the General Support area !

 

Have you tried removing (or renaming) the config/network.cfg file from the flash drive so that you revert to default network settings?   It is not unknown for an upgrade to need changes to the network setup.
 

To be able to see what is really the problem we would need your diagnostics zip file.   If you have a directly. One tee screen_keyboard this can be obtained from the GUI via Tools->Diagnostics or from the CLI using the ‘diagnostics’ command.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.