IrishBiker Posted December 8, 2019 Share Posted December 8, 2019 Hi all I have been given a Zephyr-X LightPulse Fibre nic and FSP modules for my switch. looking at System Devices I can see the card: 0c:00.0 Fibre Channel: Emulex Corporation Zephyr-X LightPulse Fibre Channel Host Adapter (rev 02) I don't see it listed under my network settings. Is the card supported in Unraid? Quote Link to comment
JorgeB Posted December 8, 2019 Share Posted December 8, 2019 Likely not, you can check if a driver is loading by posting the output of: lspci -k -s 0c:00.0 Alternatively post the diags, if there's no driver you can always make a request to add it, if there's an in tree driver (or a working out of tree one) LT usually adds it to the next release. Quote Link to comment
IrishBiker Posted December 8, 2019 Author Share Posted December 8, 2019 lspci -k -s 0c:00.0 0c:00.0 Fibre Channel: Emulex Corporation Zephyr-X LightPulse Fibre Channel Host Adapter (rev 02) DeviceName: pciPassthru3 Subsystem: Emulex Corporation Zephyr-X LightPulse Fibre Channel Host Adapter As you can see I'm running UnRaid as a VM on ESXi, and passing the hardware to UnRaid. Quote Link to comment
JorgeB Posted December 9, 2019 Share Posted December 9, 2019 No driver loaded, you'd need to request it. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.