dalgibbard Posted December 8, 2019 Share Posted December 8, 2019 Hi all, New install of 6.8.0-rc9, I've just setup my initial array with 3x 3TB disks, 1x 3TB parity, and 1x 120GB SSD cache. Everything looks OK so far, and it's currently building the parity; but for the cache, it only shows 2GB of usable space? I stopped the array, dropped into SSH and did a "dd if=/dev/zero of=/dev/sdf bs=1M count=100" to wipe the partition table in case it was something from the old machine, started the array, formatted it when it complained, but still only 2GB. Image and diags attached. tower-syslog-20191208-1548.zip Quote Link to comment
JonathanM Posted December 8, 2019 Share Posted December 8, 2019 Try blkdiscard /dev/sdf BTW, keep in mind that since Unraid runs from RAM and is basically reinstalled from scratch at each boot, the /dev/sd? designations are fluid. Don't use those to reference devices without verifying the current status. Quote Link to comment
dalgibbard Posted December 9, 2019 Author Share Posted December 9, 2019 Yup that fixed it, thanks so much! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.