Anything i can do?

See reddit post.

Is this a Kernel issue, Mobo issue, or Ryzen issue?

See below, how can i generate drivers.conf?

Added 'modprob nct6775 0xd352 to go file.

added sensors.conf to plugin folder

#sensors
chip "k10temp-pci-00c3"

    label temp1 "MB Temp"
    label temp2 "CPU Temp"

 

 

 

i ran sensors-detect and got

Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes

Found unknown chip with ID 0xd352

 

Then ran "sensors"

and got:

modprobe nct6775 0xd352^C

and got

k10temp-pci-00c3

Adapter: PCI adapter

Tdie: +47.4°C (high = +70.0°C)

Tctl: +57.4°C

 

nct6795-isa-0a20

Adapter: ISA adapter

Vcore: +1.42 V (min = +0.00 V, max = +1.74 V)

in1: +1.02 V (min = +0.00 V, max = +0.00 V) ALARM

AVCC: +3.34 V (min = +0.00 V, max = +0.00 V) ALARM

+3.3V: +3.38 V (min = +0.00 V, max = +0.00 V) ALARM

in4: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM

in5: +0.15 V (min = +0.00 V, max = +0.00 V) ALARM

in6: +0.74 V (min = +0.00 V, max = +0.00 V) ALARM

3VSB: +3.33 V (min = +0.00 V, max = +0.00 V) ALARM

Vbat: +3.25 V (min = +0.00 V, max = +0.00 V) ALARM

in9: +1.82 V (min = +0.00 V, max = +0.00 V) ALARM

in10: +0.00 V (min = +0.00 V, max = +0.00 V)

in11: +0.74 V (min = +0.00 V, max = +0.00 V) ALARM

in12: +1.16 V (min = +0.00 V, max = +0.00 V) ALARM

in13: +0.68 V (min = +0.00 V, max = +0.00 V) ALARM

in14: +1.51 V (min = +0.00 V, max = +0.00 V) ALARM

fan1: 0 RPM (min = 0 RPM)

fan2: 2428 RPM (min = 0 RPM)

fan3: 1165 RPM (min = 0 RPM)

fan4: 830 RPM (min = 0 RPM)

fan5: 836 RPM (min = 0 RPM)

fan6: 849 RPM (min = 0 RPM)

SYSTIN: +33.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = CPU diode

CPUTIN: +39.0°C (high = +110.0°C, hyst = +90.0°C) sensor = thermistor

AUXTIN0: +41.0°C (high = +110.0°C, hyst = +90.0°C) sensor = thermistor

AUXTIN1: -128.0°C sensor = thermistor

AUXTIN2: +40.0°C sensor = thermistor

AUXTIN3: -1.0°C sensor = thermistor

SMBUSMASTER 0: +57.5°C

PCH_CHIP_CPU_MAX_TEMP: +0.0°C

PCH_CHIP_TEMP: +0.0°C

PCH_CPU_TEMP: +0.0°C

intrusion0: ALARM

intrusion1: ALARM

beep_enable: disabled

You can go directly to the correct support thread for any of your plugins by selecting its Support link on the Plugins page in the webUI.

The support link redirects to 

But there is no where to post?

Do you have a link to create support post?

Edited December 10, 20196 yr by mspencerl87

Locking this thread since the user has found the support thread.