Unable to access internet.

[jp1194]

After setting up a all new all new Ubiquiti security gateways, switch, and access points, I can no longer access the internet from dockers or anything from UNRAID. Everything on my network is fine it’s just UNRAID. I changed my eth0 settings to automatic just to see if UNRAID can talk to the router and get the correct info, and UNRAID can’t even get the information it needs. I have removed all link agro from my 4 eth ports. Removed all switches between UNRAID and the security gateway, nothing allows outgoing signal.

 

 

Sent from my iPad using Tapatalk

[trurl]

Delete or rename config/network.cfg on flash to go back to default and reboot. 

[jp1194]

Delete or rename config/network.cfg on flash to go back to default and reboot. 

What would be the easiest way to delete the network config just through windows file explorer on my pc or is there a better way


Sent from my iPad using Tapatalk

[trurl]

Put flash in your PC 

[jp1194]

Doesn’t fix the problem


Sent from my iPad using Tapatalk

[jp1194]

After deleting the network config off the USB and then restarting, I still end up getting this error when I try to ping google for example

root@Tower:~# ping -c 6 google.com
PING google.com (172.217.9.78) 56(84) bytes of data.
From 10.253.0.1 (10.253.0.1) icmp_seq=1 Destination Host Unreachable
ping: sendmsg: Destination address required
 

[JorgeB]

If you have multiple NIC you need to check which one is eth0, you can do that by booting using the GUI mode, if with that it still doesn't work please post the diagnostics.