Jump to content
limetech

Unraid OS version 6.8 available

254 posts in this topic Last Reply

Recommended Posts

7 minutes ago, bobbintb said:

Not a clue.

Try toggling "Tunable (support Hard Links)" to no, click apply, then back to yes and apply again. (Settings -> Global Share Settings)

Share this post


Link to post
39 minutes ago, bobkart said:

I have a bunch of scripts in /boot/bin/ that I use often from the command line.  After the upgrade to 6.8 I can no longer execute them.  Checking the protection I see 'rw' but no 'x'.  Trying to chmod them to 700 has no effect.

 

Is there a way to use the scripts now as easily as before the upgrade?  I'd much rather type 'foo' than 'bash /boot/bin/foo' each time I need to run one of these scripts (and I use these scripts frequently).

I do this to run my scripts from /root/bin

 

Share this post


Link to post
40 minutes ago, johnnie.black said:

Try toggling "Tunable (support Hard Links)" to no, click apply, then back to yes and apply again. (Settings -> Global Share Settings)

Well, after trying to roll back my config, now no disks are assigned and I am getting a "stale configuration" message. I haven't had a chance to change the hardlink option yet.

Edited by bobbintb

Share this post


Link to post
46 minutes ago, bobbintb said:

now no disks are assigned and I am getting a "stale configuration" message.

Close all open browsers on the GUI and re-open a single window.

Share this post


Link to post
2 hours ago, bobbintb said:

Not a clue.

 

2 hours ago, johnnie.black said:

Dec 22 14:14:21 Tower emhttpd: shcmd (104): /usr/local/sbin/shfs /mnt/user -disks 4095 2048000000 -o noatime,allow_other -o remember=330 -o use_ino |& logger
Dec 22 14:14:21 Tower shfs: fuse: unknown option(s): `-o use_ino'

Shares aren't working because of the "use_ino" option, where does this come from?

At one point during the SQLite problems, @limetech suggested to add that line into (i believe) shfs-extra.cfg.   you need to delete that file

Share this post


Link to post

I only have one issue after upgrading to 6.8 with the Enhanced System Log plugin when I open it in Chrome the tab freezes and is unresponsive until its closed. The same page works fine in Firefox and MS Edge with no issue. I have tried to clear cookies and tried incognito mode in Chrome with no luck. As for the System Log page it opens fine in Chrome.

Share this post


Link to post
37 minutes ago, poniz said:

I only have one issue after upgrading to 6.8 with the Enhanced System Log plugin when I open it in Chrome the tab freezes and is unresponsive until its closed. The same page works fine in Firefox and MS Edge with no issue. I have tried to clear cookies and tried incognito mode in Chrome with no luck. As for the System Log page it opens fine in Chrome.

This is not the place for discussing problems with a plugin. You can always go directly to the correct support thread for any of your plugins by using its Support Thread link on the Plugins page.

Share this post


Link to post
8 hours ago, johnnie.black said:

Close all open browsers on the GUI and re-open a single window.

It still show no disks assigned. I can reassign them, but then it will rebuild the parity.

Share this post


Link to post
5 minutes ago, bobbintb said:

It still show no disks assigned. I can reassign them, but then it will rebuild the parity.

Just downgrading wouldn't' cause that, you should open a thread in the general support forum, and please add the diagnostics.

Share this post


Link to post
1 hour ago, johnnie.black said:

Just downgrading wouldn't' cause that, you should open a thread in the general support forum, and please add the diagnostics.

Well, it was showing that before I downgraded. It showed the disks but no user shares. I tried rebooting and then it show no assigned disks. That's when I tried downgrading. Still, I don't think it's an upgrade issue so I'll post there. Thanks everyone.

Share this post


Link to post
12 hours ago, JoeUnraidUser said:

I do this to run my scripts from /root/bin

 

Thanks Joe, I'll likely do something like that.

Share this post


Link to post
On 12/16/2019 at 9:02 AM, drdebian said:

Alright, my test-server survived the upgrade no sweat... Gonna try upgrading main-server in a few days...

Upgrading the main server also went smoothly, very good procedure. I just wish it hadn't triggered a parity check right after migrating... ;)

Share this post


Link to post

There seems to be a minor bug in the docker subsystem though. When updating to a new image, the web UI sometimes "loses connection" to the process and gets stuck, all the while the update either went smoothly or crashed in the background. Anybody else seeing this?

Share this post


Link to post

I upgraded my server, everything seems to be going smoothly.  No issues with updates, Dockers, transfer speeds, etc.  I did bump into the NoVNC bug once, but it didn't persist.  So far my uptime is 6+ days so I guess I meant to post this earlier.  Really enjoying being able to copy files on the server while the family is watching something on Plex.  Thanks for all the efforts, LT!!

Share this post


Link to post
On 12/22/2019 at 2:00 PM, ich777 said:

SvenCoop will be available in the next few hours in the CA App. ;)

oooooo, nice! I was going to add it but been pretty busy lately (especially with the Holidays). Btw, thanks for the steamcmd docker container that I used to create this one. Saved me a lot of work ;) I also use your other containers and they have all been great.


I was able to fix my issue with my sven co-op server by using the cache drive directly instead of the share (changing /mnt/user/appdata/svencoop to /mnt/cache/appdata/svencoop). I'm not sure exactly what broke _stat calls for share mounts. If anyone else has an idea of what it could be I would love to hear about it.

Share this post


Link to post

Main server upgrade appears good. 

-Windows 10 VM with 1080 for steam streaming of owned games. 

-Windows 10 VM with 1060, odd sata card, USB card for software suite use. 

-Windows 7 VM vnc for legacy software use. 

-crashplan docker

-Makemkv Docker with USB odd

-Dual parity

-Media links from osmc for owned media consumption 

-Pre-Clear plugin 

Edited by landS

Share this post


Link to post
16 minutes ago, PanteraGSTK said:

Upgraded the server to 6.8 and no issues other than two random reboots. Diagnostics attached.

Enable Syslog Server as explained in the FAQ here:

https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=781601

 

I also notice you have FCP warnings about several containers without templates. What do you plan to do about those?

 

Share this post


Link to post
19 minutes ago, PanteraGSTK said:

Diagnostics attached.

Also, your system share has files on the array.

 

And your docker image is larger than I usually recommend, possibly that is related to those dockers without templates. Have you had problems with filling docker image?

Share this post


Link to post
35 minutes ago, trurl said:

Enable Syslog Server as explained in the FAQ here:

https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=781601

 

I also notice you have FCP warnings about several containers without templates. What do you plan to do about those?

 

 

Those warnings are pretty old. Most are just using something other than the default port. Haven't caused any issues at all for quite some time. I will look at resolving them.

 

EDIT: Correction. I didn't notice they were template errors. I've corrected those.

 

I have syslog enabled, but it looks like it was set to a "custom folder" which it shouldn't have been. I've corrected that.

Edited by PanteraGSTK

Share this post


Link to post
29 minutes ago, trurl said:

Also, your system share has files on the array.

 

And your docker image is larger than I usually recommend, possibly that is related to those dockers without templates. Have you had problems with filling docker image?

Docker has 21gb used. At one point it went over 30gb, but I've removed some dockers since then and it's been pretty stable at 21gb.

Share this post


Link to post

Upgraded from 6.7.2 and it went fast and smooth.

However, I get a double header in my user scripts page using Chrome. If I use Incognito mode in Chrome, it works as does Firefox. I cleared my cache of everything except passwords.

There's also a "Waiting for..." message at the bottom left of the screen on this page.

 

I suppose I could use Incognito mode, but I'd rather not.

 

Any ideas?

 

Screenshot_2019-12-26_10-09-15.png.c2d5048cf525145387620d2608f62a5e.png

Share this post


Link to post
On 12/11/2019 at 10:23 AM, limetech said:

Please open a separate bug report for this.

Look like his time clocks are off according to the time sync error.  Sync date and Time plays a huge part in all things computer and networks.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.