tmchow Posted December 14, 2019 Share Posted December 14, 2019 (edited) I just upgraded to 6.8.0 and when server rebooted it can no longer get an IP. It’s listed as the dreaded 169.254.173.250. I get all the way to login prompt and can login. I have a monitor and keyboard connected to the server but can not access web GUI obviously. I’ve double checked cables and there is an active link to my switch so it’s not the cables. Lights are lit on both the server NIC and my switch. help? Update: I've attached logs. tower-diagnostics-20191214-1413.zip Edited December 14, 2019 by tmchow Quote Link to comment
bonienl Posted December 14, 2019 Share Posted December 14, 2019 Run from your attached monitor / keyboard diagnostics This saves a zip file in the /logs folder on your USB stick. When finished power down your system and take out the USB stick. Post the zip file. Quote Link to comment
tmchow Posted December 14, 2019 Author Share Posted December 14, 2019 Run from your attached monitor / keyboarddiagnostics This saves a zip file in the /logs folder on your USB stick. When finished power down your system and take out the USB stick. Post the zip file.Oh man what a pain. My usb stick is inside the case and it’s rackmounted. I’ll get it done.... later tonight Quote Link to comment
bonienl Posted December 14, 2019 Share Posted December 14, 2019 7 minutes ago, tmchow said: Oh man what a pain. My usb stick is inside the case and it’s rackmounted. I’ll get it done.... later tonight Without diagnostics it will be a guessing game (aka we have no clue what happened) ... Quote Link to comment
tmchow Posted December 14, 2019 Author Share Posted December 14, 2019 2 minutes ago, bonienl said: Without diagnostics it will be a guessing game (aka we have no clue what happened) ... Okay, i actually managed to wrangle my children for a moment so was able to quickly unrack and get the USB key. I've attached it to the original post. Quote Link to comment
bonienl Posted December 14, 2019 Share Posted December 14, 2019 For some reason the connection (eth0) went down while the system was trying to obtain an IP address. You can try to start again, and see if this time an address is obtained (there is no settings errors or other) If not successful, try from monitor + keyboard /etc/rc.d/rc.inet1 eth0_restart Another (preferred) approach is to set a fixed address instead of DHCP. Quote Link to comment
tmchow Posted December 14, 2019 Author Share Posted December 14, 2019 4 minutes ago, bonienl said: For some reason the connection (eth0) went down while the system was trying to obtain an IP address. You can try to start again, and see if this time an address is obtained (there is no settings errors or other) If not successful, try from monitor + keyboard /etc/rc.d/rc.inet1 eth0_restart Another (preferred) approach is to set a fixed address instead of DHCP. I restarted after the first reboot post-6.8.0 install and then subsequently powered down to pull the USB key. I've attached the diagnostics that were created as part of that shutdown in case that helps. I'll try the command you recommended to see if that solves anything. Regarding your suggestion to set a fixed address, which file do I edit to specify a fixed IP? tower-diagnostics-20191214-1414.zip Quote Link to comment
bonienl Posted December 14, 2019 Share Posted December 14, 2019 5 minutes ago, tmchow said: which file do I edit to specify a fixed IP On your USB stick: /config/network.cfg For example (change addresses to your need) USE_DHCP[0]="no" IPADDR[0]="10.0.0.2" NETMASK[0]="255.255.255.0" GATEWAY[0]="10.0.0.1" DNS_SERVER1="1.1.1.1" DNS_SERVER2="1.0.0.1" Quote Link to comment
tmchow Posted December 14, 2019 Author Share Posted December 14, 2019 On your USB stick: /config/network.cfg For example (change addresses to your need)USE_DHCP[0]="no"IPADDR[0]="10.0.0.2"NETMASK[0]="255.255.255.0"GATEWAY[0]="10.0.0.1"DNS_SERVER1="1.1.1.1"DNS_SERVER2="1.0.0.1" Ok I ran the eth0 restart command and that got me an IP! Not sure what’s going on and why I can’t get an IP during boot. I’ll set it to fixed Ip like you suggested. Quote Link to comment
bonienl Posted December 14, 2019 Share Posted December 14, 2019 10 minutes ago, tmchow said: Not sure what’s going on and why I can’t get an IP during boot. If have seen issues when the "Tips and Tweaks" plugin is used to adjust interface parameters. You can try to restore default settings or uninstall the plugin. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.