December 16, 20196 yr So, I have my Unraid server set-up with Plex, Sonarr, Radarr, Jackett and qBittorrent. My Specs are: Ryzen 3 2400G, ASUS TUF-B450 Motherboard, 32GB Corsair Vengence Memory, 6*10TB Seagate Barracuda Pro's It usually works for a few hours before it outright crashes and wont do anything, cant connect via WebGUI, No Monitor Output, etc. Ive tried getting a different USB (32GB instead of 64GB), and Remounting RAM and CPU. So I cant optain a Log file via the usual means... The Way I """Fixed""" it before was by just reflashing the USB, Let the Parity Sync run, then Installing the Community Plugins-Plugin, and restarting everything... But this isnt a permanent solution in any way or form.
December 16, 20196 yr Community Expert Ryzen on Linux can lock up due to issues with c-states, make sure bios is up to date, then look for "Power Supply Idle Control" (or similar) and set it to "typical current idle" (or similar), or completely disable C-sates. More info here: https://forums.unraid.net/bug-reports/prereleases/670-rc1-system-hard-lock-r354/
December 16, 20196 yr Author Thanks for the Reply, ill update the Bios and look for the C-Stats settings, if that doesnt work ill reply again...
December 16, 20196 yr Author Ok, Im Back, And its behaving very very strange now, I only changed the Power Supply Idle Control, and when it boots, it turn on and off in 2 short bursts before giving me a post failed error... I might try unraid now, but I dont like this at all... 2 hours ago, johnnie.black said: Ryzen on Linux can lock up due to issues with c-states, make sure bios is up to date, then look for "Power Supply Idle Control" (or similar) and set it to "typical current idle" (or similar), or completely disable C-sates. More info here: https://forums.unraid.net/bug-reports/prereleases/670-rc1-system-hard-lock-r354/
December 16, 20196 yr Ok, Im Back, And its behaving very very strange now, I only changed the Power Supply Idle Control, and when it boots, it turn on and off in 2 short bursts before giving me a post failed error... I might try unraid now, but I dont like this at all... What memory profile are you using? Just try underclocking speed of the ram, I had stability issues with Corsair vengeance ram with a Ryzen 2700x.Sent from my CLT-L09 using Tapatalk
December 17, 20196 yr Author Ive underclocked the memory to 2133 and set it to typical current idle, it still crashed after a few hours, ill soon try disabling c-states alltogether and see if that helps...
December 17, 20196 yr Ive underclocked the memory to 2133 and set it to typical current idle, it still crashed after a few hours, ill soon try disabling c-states alltogether and see if that helps...Have you run memtest to ensure it's not a bad memory module?Sent from my CLT-L09 using Tapatalk
December 17, 20196 yr Author The system ran around 9 hours before it crashed again, with typical current idle and 2133 memory. Now I cant boot at all, let alone get into BIOS... The screen is just black and nothing happens, the power button just immediately turns it off. I think I just wasted a lot of money...
December 17, 20196 yr Community Expert It should be withing the warranty period, or did you buy used?
December 17, 20196 yr Community Expert If it doesn't even post it's possibly the board, but it can be other issues, like RAM, PSU, etc. Do a CMOS reset, remove all the DIMMs, make sure a speaker is connected and power up, you should hear some beeps, if yes try just one DIMM, if no beeps it's most likely the board.
December 17, 20196 yr Author I dont have a speaker on hand, Even without RAM, it remains unchanged... Ill remove everything now and prepare for RMA...
Archived
This topic is now archived and is closed to further replies.