perhansen Posted April 13, 2020 Share Posted April 13, 2020 (edited) Hi there. My Shinobi log keeps filling up with this error {"f":"trigger","id":"wUEfhAPUd6","ke":"wjDSbcgmOV","name":"ABqYf","details":{"plug":"built-in","name":"ABqYf","reason":"motion","confidence":14},"plates":[],"imgHeight":"480","imgWidth":"640","doObjectDetection":false}{"f":"trigger","id":"wUEfhAPUd6","ke":"wjDSbcgmOV","name":"ABqYf","details":{"plug":"built-in","name":"ABqYf","reason":"motion","confidence":7},"plates":[],"imgHeight":"480","imgWidth":"640","doObjectDetection":false} SyntaxError: Unexpected token { in JSON at position 218 at JSON.parse (<anonymous>) at Socket.<anonymous> (/opt/shinobi/libs/monitor.js:1085:39) at emitOne (events.js:116:13) at Socket.emit (events.js:211:7) at addChunk (_stream_readable.js:263:12) at readableAddChunk (_stream_readable.js:250:11) at Socket.Readable.push (_stream_readable.js:208:10) at Pipe.onread (net.js:601:20) There was an error parsing a detection event It's the motion detection event that is triggering this. I have tried to delete the motion detection region and made a new one, but with same effect. This only occurs on this one camera. I have another camera, same model, where there is no error from. I have also tried to copy settings within Shinobi, with no effect. What could cause this error? When i leave my Shinobi open, my camera monitors suddenly turns black after 7 minutes, is this normal? ---edite--- I am not even sure that my motion detection is working. I get motion records from both cameras outside the red motion detection region. Edited April 13, 2020 by perhansen Quote Link to comment
Oxxy Posted April 15, 2020 Share Posted April 15, 2020 (edited) Hi All I am running into performance issues. Running an i7 with 24GB RAM, and 8 Hikvision cameras. CPU is mostly pegged at 100% For the stream i have it set to copy, with no audio, ditto for recording. I have followed SpaceInvaderOne's guide on passing through an nVidia GPU to try and leverage HW acceleration, ditto with QuickSync - still ends up with 100% usage. I'm writing to an unassigned drive, as per the guide (4TB Purple) Stream Type - Poseidon, via WebSocket I have tried Video Codec ... Copy H.264 NVENC H.264 QuickSync Video H.264 VA-API Intel Acceleration I have tried these settings in 'Input' and 'Recording', but now i feel like I am going around in circles. Is there something silly i am missing? Also, when i used any sort of HW acceleration setting, the Monitor windows are all black. I'd like to move to Unraid an Shinobi, but not if 8 cameras are going to peg an i7 and 100% 24/7. Thoughts? EDIT - just set the entire thing up again on an AMD 1600AF and 16GB RAM, CPU usage isnt 100%, but its way too high to leave like this 24/7 And log for one of the cameras trying to use nVidia card - "Unknown encoder 'h264_nvenc' ", and "Unknown decoder 'h264_qsv'" for Quicksync Edited April 15, 2020 by Oxxy Added info 1 Quote Link to comment
Living Legend Posted April 18, 2020 Share Posted April 18, 2020 16 minutes ago, Living Legend said: Has anyone else encountered a problem (this docker or any other) where a manual stop of the docker and then restart clears out specific data within the docker? I'm experiencing an issue on this docker where if I stop the docker and start it, anything that has been stashed in my "recordings" share gets wiped out. My mappings are as follows: /config/ -----> mnt/user/appdata/shinobiPro /var/lib/mysql/ -----> mnt/user/appdata/shinobiPro/database /opt/shinobi/libs/customAutoLoad/ -----> mnt/user/appdata/shinobiPro/customautoload /usr/share/zoneinfo/ -----> /usr/share/zoneinfo/ /opt/shinobi/videos/ -----> mnt/user/surveillance/ /unraid/ -----> mnt/user /dev/shm/streams/ -----> mnt/user/surveillance/ Figured it out, that was silly. I had the "temp streams" mapped to the same location as the permanent recordings. I assume upon reset, the temp streams folder gets cleared which was ultimately clearing my recrodings folder. Now on to figuring out how to get recording on motion working. Quote Link to comment
Living Legend Posted April 18, 2020 Share Posted April 18, 2020 (edited) Has anyone else had trouble setting up motion? I thought I had it figured out, maybe something to do with time stamps where it wasn't making proper comparisons on frames? Was a a complete guess, but when I removed that timezone docker mapping, my watch-only monitor with trigger-record finally would trigger. Then I decided to shorten the 10 minute recording to 30 seconds. And now motion no longer triggers it. I even went as drastic as I could, set a specific done by my front door, only leveraged that zone, set indifference to 1, and then wildly swung the door. It would not trigger the event. Spent too many hours on this so I'll have to shelve it for a while. I may try to run the program natively rather than use the docker. Per usual, I'm sure this is user error, but there's typically less potential for user error outside of the docker realm. EDIT: The attached image seems to be the culprit. If I don't set this for 10, it won't trigger. When I place it on 1, it doesn't trigger. Any ideas? Edited April 18, 2020 by Living Legend Quote Link to comment
Kodiak51103 Posted April 18, 2020 Share Posted April 18, 2020 Hello, I have a docker (Shinobi) on IP 192.168.x.x and my unraid is on 10.1.x.x The docker will start but when i open the webui it always fails page not found. This is the last line in the shinobi log: fatal: unable to access 'https://gitlab.com/Shinobi-Systems/Shinobi.git/': Could not resolve host: gitlab.com. If I put shinobi on the 10.1.x.x it works no issues. Do I need to add a route to connect the two or a route to the internet? If so where would i do this in unriad or in my firewall im running Pfsense. Quote Link to comment
vicki Posted April 19, 2020 Share Posted April 19, 2020 23 hours ago, Kodiak51103 said: Hello, I have a docker (Shinobi) on IP 192.168.x.x and my unraid is on 10.1.x.x The docker will start but when i open the webui it always fails page not found. This is the last line in the shinobi log: fatal: unable to access 'https://gitlab.com/Shinobi-Systems/Shinobi.git/': Could not resolve host: gitlab.com. If I put shinobi on the 10.1.x.x it works no issues. Do I need to add a route to connect the two or a route to the internet? If so where would i do this in unriad or in my firewall im running Pfsense. Did you get this figured out? I'm having the same problem. Quote Link to comment
vicki Posted April 19, 2020 Share Posted April 19, 2020 On 3/7/2020 at 4:27 PM, dawhit said: Hi Everyone, I keep getting a cannot resolve host error when I connect Shinobi to the vlan 50 address. fatal: unable to access 'https://gitlab.com/Shinobi-Systems/Shinobi.git/': Could not resolve host: gitlab.com When I connect it to the bridge or proxynet networks it is successful and works. I have built my vlan on pfsense and it is giving dhcp leases and connecting to the internet. I have deleted Shinobi and I have followed Spaceinvaderone's directions, many times over, and get the same results. Many thanks Sir for your awesome videos! Vlans is enabled in eth0 with number 50. Docker is configured with br0.50 and address is 192.168.50.0 with 192.168.50.1 set for the gateway Shinobi pro container is configured 192.168.50.10 using port 8080 Ping from Unraid terminal to 50.1 successful Ping form Unraid terminal to 50.10 fails Ping from Pfsense Lan and cctv interfaces to 50.1 successful clearly the container is not connecting to the 50.0 network, or it is being blocked, I do not know how to proceed from here. Any help resolving this deserves great gratitude. Thank you Did you get this figured out? I have the same issue. When the docker is starting up, it can be pinged until it gets to this error. Then the pings stop and the docker stops. Quote Link to comment
Kodiak51103 Posted April 21, 2020 Share Posted April 21, 2020 On 4/19/2020 at 12:31 PM, vicki said: Did you get this figured out? I'm having the same problem. Sorry, No i have not but will update this post if I do hope you do the same. Thanks Quote Link to comment
e46forlife Posted April 21, 2020 Share Posted April 21, 2020 On 4/18/2020 at 11:27 AM, Kodiak51103 said: Hello, I have a docker (Shinobi) on IP 192.168.x.x and my unraid is on 10.1.x.x The docker will start but when i open the webui it always fails page not found. This is the last line in the shinobi log: fatal: unable to access 'https://gitlab.com/Shinobi-Systems/Shinobi.git/': Could not resolve host: gitlab.com. If I put shinobi on the 10.1.x.x it works no issues. Do I need to add a route to connect the two or a route to the internet? If so where would i do this in unriad or in my firewall im running Pfsense. Yes you need to have a route setup on unraid, but you also need to make sure that your firewall is setup to allow that IP (192.168.x.x) to connect to the internet. Try sending a ping to 8.8.8.8 to make sure it has access to the internet. Quote Link to comment
dawhit Posted April 24, 2020 Share Posted April 24, 2020 On 4/19/2020 at 12:42 PM, vicki said: Did you get this figured out? I have the same issue. When the docker is starting up, it can be pinged until it gets to this error. Then the pings stop and the docker stops. Not yet, I have been really busy and have not had a chance. Did you get it resolved? Quote Link to comment
Code-Id10t Posted April 25, 2020 Share Posted April 25, 2020 (edited) On 4/23/2020 at 8:23 PM, dawhit said: Not yet, I have been really busy and have not had a chance. Did you get it resolved? I was using a dedicated IP by way of "custom: br0" and had the same issue, my routing looked fine from the unRaid side. Most other containers don't have any issues, but I have ran across a few that insist on running on bridge... So change your network type to bridge and see if it fixes if for you... Edit: Got it to work with custom IP by adding the "--dns 1.1.1.1" in the extra parms in the docker config... Edited April 25, 2020 by Code-Id10t Alt option... Quote Link to comment
BigRedWolfy Posted May 1, 2020 Share Posted May 1, 2020 I've tried using the discord bot, but nothing I do seems to make the bot do anything. I've double checked both the channel ID and the bot token Quote Link to comment
thestraycat Posted May 2, 2020 Share Posted May 2, 2020 On 3/19/2020 at 8:22 PM, kimocal said: I keep trying to export the Timelapse but it seems to get stuck and never creates the export. I'm having the same issue other than i don't even get that far. Download button does nothing for me... Can you paste your config? Quote Link to comment
pabohoney1 Posted May 4, 2020 Share Posted May 4, 2020 Posting here to hopefully save some people a headache that I chased for too long. I was running into an issue where my two cameras would show blank black boxes for the monitors but would still somehow still record and the thumbnails on the left were correctly updating. I uninstalled and reinstalled, deleted the monitors and re-added them. I messed with network settings for an hour trying to troubleshoot what was blocking this. Stupidly I didn't think to try another browser or computer, because when I finally did, it was all working fine. My entire issue.....cookies. The problem started when I duplicated one of the monitors to change the monitor ID. I don't know if a cookie was corrupted or what. Attached is what I was seeing. Quote Link to comment
cyndor1 Posted May 5, 2020 Share Posted May 5, 2020 (edited) On 5/3/2020 at 8:55 PM, pabohoney1 said: Posting here to hopefully save some people a headache that I chased for too long. I was running into an issue where my two cameras would show blank black boxes for the monitors but would still somehow still record and the thumbnails on the left were correctly updating. I uninstalled and reinstalled, deleted the monitors and re-added them. I messed with network settings for an hour trying to troubleshoot what was blocking this. Stupidly I didn't think to try another browser or computer, because when I finally did, it was all working fine. My entire issue.....cookies. The problem started when I duplicated one of the monitors to change the monitor ID. I don't know if a cookie was corrupted or what. Attached is what I was seeing. Thanks for that. I ended up also trying on my phone and was having the same issue so I didn't think of deleting my cookies. My problem started in a similar way when I kept deleting and changing monitor settings. Edited May 5, 2020 by cyndor1 Quote Link to comment
Sosk91 Posted May 10, 2020 Share Posted May 10, 2020 Hello, This morning I have a problem for start docker. log: mysqld is alive Setting up MySQL database if it does not exist ... Create database schema if it does not exist ... ERROR 1060 (42S21) at line 127 in file: '/opt/shinobi/sql/framework.sql': Duplicate column name 'time' Create database user if it does not exist ... ERROR 1396 (HY000) at line 1 in file: '/opt/shinobi/sql/user.sql': Operation CREATE USER failed for 'majesticflame'@'127.0.0.1' You have an idea ? I tried a restore with CA Backup / Restore Appdata that did not change anything ... Quote Link to comment
Flubster Posted May 10, 2020 Share Posted May 10, 2020 5 hours ago, Sosk91 said: Hello, This morning I have a problem for start docker. log: mysqld is alive Setting up MySQL database if it does not exist ... Create database schema if it does not exist ... ERROR 1060 (42S21) at line 127 in file: '/opt/shinobi/sql/framework.sql': Duplicate column name 'time' Create database user if it does not exist ... ERROR 1396 (HY000) at line 1 in file: '/opt/shinobi/sql/user.sql': Operation CREATE USER failed for 'majesticflame'@'127.0.0.1' You have an idea ? I tried a restore with CA Backup / Restore Appdata that did not change anything ... This is not an error unless it's the first time you've started the container. The init script here lines 74-80 doesn't check if the database has been created, it just attempts to recreate and if it fails (which it will if it's not the first install) then it'll error. I suspect everyone sees that error on load - I do The docker image spaceinvaderone has in the repo is just the UnRAID definitions for the docker image migoller/shinobidocker:latest with no modifications, it's literally just a straight pull Dave Quote Link to comment
luixmod Posted May 12, 2020 Share Posted May 12, 2020 On 4/10/2020 at 6:12 PM, UnraidDuck said: Got it installed and started. Enabled it for a few monitors, but can't see any frames around objects. Did you or anyone else get any further? i have the same problem, i folow this tutorial https://hub.shinobi.video/articles/view/JtJiGkdbcpAig40 to install yolo, i get the yolo connect but on the logs keep seing that "detectObject handler not set" i dont know what this mien Quote Link to comment
Sublivion Posted May 13, 2020 Share Posted May 13, 2020 (edited) @SpaceInvaderOne This docker seems to use ffmpeg 3.3.4: /opt/shinobi # ffmpeg ffmpeg version 3.3.4-static but shinobi docs are saying to use at least 3.4.6: "You should be on FFMPEG 3.4.6 or above for the best performance." https://hub.shinobi.video/articles/view/DmWIID78VtvEfnf edit: after todays update 4.2.1 Edited May 13, 2020 by Sublivion Quote Link to comment
Ong Hui Hoong Posted May 13, 2020 Share Posted May 13, 2020 latest update break the docker, config seem to ave more thing now, @SpaceInvaderOne might need to make a new tutorial for all the new option Quote Link to comment
SpaceInvaderOne Posted May 13, 2020 Author Share Posted May 13, 2020 @Ong Hui Hoong your template seems very strange it is not the correct one for some reason. it should look like this now You will not need to change any settings for your Shinobi to continue working. These are all additional extra settings mainly only if you want dont want to use the built in mariadb server in the container but would like to use a separate msql outside of the container. Anyway you will need to delete the template that you have. (just make a note of your video storage location path as after deleting you will need to put that back in) please do these steps. 1. Stop and delete the container. 2. On the docker page goto the bottom and click add container. Then find the shinobi pro template that is stored locally on your server here. Select it now click on the red cross to delete the template. Now you can goto CA and search for shinobipro and redownload the container. Just put back in your video location in the template and pull down the container. All the appdata will still be there as well as all your recorded footage. Hope thsi helps 1 Quote Link to comment
Ong Hui Hoong Posted May 14, 2020 Share Posted May 14, 2020 Thanks @SpaceInvaderOne, I'm able to redo as you suggested everything restored anyway how do i do the timezone thing? my timezone is GMT+8, i think this new template will be able to fix the timezone thing now ... Quote Link to comment
Frankiejk Posted May 14, 2020 Share Posted May 14, 2020 On 5/3/2020 at 9:32 AM, thestraycat said: I'm having the same issue other than i don't even get that far. Download button does nothing for me... Can you paste your config? Same here. This is what is thrown into the log after I click the download button for exporting a time lapse section: Error: write EPIPE at WriteWrap.onWriteComplete [as oncomplete] (internal/stream_base_commons.js:87:16) { errno: 'EPIPE', code: 'EPIPE', syscall: 'write' } Uncaught Exception occured! Error: write EPIPE at WriteWrap.onWriteComplete [as oncomplete] (internal/stream_base_commons.js:87:16) Error: ENOENT: no such file or directory, stat '/opt/shinobi/fileBin/xxxxxxxxx/FrontOffice/2020-05-14T11-32-06_2020-05-14T23-07-26-30fps.mp4' at Object.statSync (fs.js:915:3) at ChildProcess.<anonymous> (/opt/shinobi/libs/videos.js:488:44) at ChildProcess.emit (events.js:223:5) at Process.ChildProcess._handle.onexit (internal/child_process.js:272:12) { errno: -2, syscall: 'stat', code: 'ENOENT', path: '/opt/shinobi/fileBin/xxxxxxx/FrontOffice/2020-05-14T11-32-06_2020-05-14T23-07-26-30fps.mp4' } Uncaught Exception occured! Error: ENOENT: no such file or directory, stat '/opt/shinobi/fileBin/xxxxxxx/FrontOffice/2020-05-14T11-32-06_2020-05-14T23-07-26-30fps.mp4' at Object.statSync (fs.js:915:3) at ChildProcess.<anonymous> (/opt/shinobi/libs/videos.js:488:44) at ChildProcess.emit (events.js:223:5) at Process.ChildProcess._handle.onexit (internal/child_process.js:272:12) Error [ERR_STREAM_DESTROYED]: Cannot call write after a stream was destroyed at doWrite (_stream_writable.js:431:19) at writeOrBuffer (_stream_writable.js:419:5) at Socket.Writable.write (_stream_writable.js:309:11) at /opt/shinobi/libs/videos.js:501:61 at FSReqCallback.readFileAfterClose [as oncomplete] (internal/fs/read_file_context.js:61:3) { code: 'ERR_STREAM_DESTROYED' } Uncaught Exception occured! Error [ERR_STREAM_DESTROYED]: Cannot call write after a stream was destroyed at doWrite (_stream_writable.js:431:19) at writeOrBuffer (_stream_writable.js:419:5) at Socket.Writable.write (_stream_writable.js:309:11) at /opt/shinobi/libs/videos.js:501:61 at FSReqCallback.readFileAfterClose [as oncomplete] (internal/fs/read_file_context.js:61:3) Ommited some details with 'x' but yeh, not sure what all this means but after updating the docker it seems something has broken for exporting time lapse vids. Quote Link to comment
thestraycat Posted May 14, 2020 Share Posted May 14, 2020 6 minutes ago, Frankiejk said: Same here. This is what is thrown into the log after I click the download button for exporting a time lapse section: Error: write EPIPE at WriteWrap.onWriteComplete [as oncomplete] (internal/stream_base_commons.js:87:16) { errno: 'EPIPE', code: 'EPIPE', syscall: 'write' } Uncaught Exception occured! Error: write EPIPE at WriteWrap.onWriteComplete [as oncomplete] (internal/stream_base_commons.js:87:16) Error: ENOENT: no such file or directory, stat '/opt/shinobi/fileBin/xxxxxxxxx/FrontOffice/2020-05-14T11-32-06_2020-05-14T23-07-26-30fps.mp4' at Object.statSync (fs.js:915:3) at ChildProcess.<anonymous> (/opt/shinobi/libs/videos.js:488:44) at ChildProcess.emit (events.js:223:5) at Process.ChildProcess._handle.onexit (internal/child_process.js:272:12) { errno: -2, syscall: 'stat', code: 'ENOENT', path: '/opt/shinobi/fileBin/xxxxxxx/FrontOffice/2020-05-14T11-32-06_2020-05-14T23-07-26-30fps.mp4' } Uncaught Exception occured! Error: ENOENT: no such file or directory, stat '/opt/shinobi/fileBin/xxxxxxx/FrontOffice/2020-05-14T11-32-06_2020-05-14T23-07-26-30fps.mp4' at Object.statSync (fs.js:915:3) at ChildProcess.<anonymous> (/opt/shinobi/libs/videos.js:488:44) at ChildProcess.emit (events.js:223:5) at Process.ChildProcess._handle.onexit (internal/child_process.js:272:12) Error [ERR_STREAM_DESTROYED]: Cannot call write after a stream was destroyed at doWrite (_stream_writable.js:431:19) at writeOrBuffer (_stream_writable.js:419:5) at Socket.Writable.write (_stream_writable.js:309:11) at /opt/shinobi/libs/videos.js:501:61 at FSReqCallback.readFileAfterClose [as oncomplete] (internal/fs/read_file_context.js:61:3) { code: 'ERR_STREAM_DESTROYED' } Uncaught Exception occured! Error [ERR_STREAM_DESTROYED]: Cannot call write after a stream was destroyed at doWrite (_stream_writable.js:431:19) at writeOrBuffer (_stream_writable.js:419:5) at Socket.Writable.write (_stream_writable.js:309:11) at /opt/shinobi/libs/videos.js:501:61 at FSReqCallback.readFileAfterClose [as oncomplete] (internal/fs/read_file_context.js:61:3) Ommited some details with 'x' but yeh, not sure what all this means but after updating the docker it seems something has broken for exporting time lapse vids. Yup - Same here. Wondering if the timelapse folder needs to be set up as a variable in the docker or template or whether shinobi needs the timelapse destination referenced somewhere in the application. My install dosn't even really attempt to export it, high CPU load, then just gives up after about 5 seconds. Quote Link to comment
pmcnano Posted May 14, 2020 Share Posted May 14, 2020 Since the update last night I am getting an error, I tried what @SpaceInvaderOne suggested for another problem a couple of replies before, but it didn't work. I removed the template and reinstalled, same error. 2020-05-14 17:06:31 11 [ERROR] mysqld: Incorrect information in file: './ccio/Presets.frm' Error: ER_NOT_FORM_FILE: Incorrect information in file: './ccio/Presets.frm' at Query.Sequence._packetToError (/opt/shinobi/node_modules/mysql/lib/protocol/sequences/Sequence.js:47:14) at Query.ErrorPacket (/opt/shinobi/node_modules/mysql/lib/protocol/sequences/Query.js:79:18) at Protocol._parsePacket (/opt/shinobi/node_modules/mysql/lib/protocol/Protocol.js:291:23) at Parser._parsePacket (/opt/shinobi/node_modules/mysql/lib/protocol/Parser.js:433:10) at Parser.write (/opt/shinobi/node_modules/mysql/lib/protocol/Parser.js:43:10) at Protocol.write (/opt/shinobi/node_modules/mysql/lib/protocol/Protocol.js:38:16) at Socket.<anonymous> (/opt/shinobi/node_modules/mysql/lib/Connection.js:88:28) at Socket.<anonymous> (/opt/shinobi/node_modules/mysql/lib/Connection.js:526:10) at Socket.emit (events.js:223:5) at addChunk (_stream_readable.js:309:12) at readableAddChunk (_stream_readable.js:290:11) at Socket.Readable.push (_stream_readable.js:224:10) at TCP.onStreamRead (internal/stream_base_commons.js:181:23) -------------------- at Protocol._enqueue (/opt/shinobi/node_modules/mysql/lib/protocol/Protocol.js:144:48) at Connection.query (/opt/shinobi/node_modules/mysql/lib/Connection.js:198:25) at /opt/shinobi/node_modules/knex/lib/dialects/mysql/index.js:130:18 at Promise._execute (/opt/shinobi/node_modules/bluebird/js/release/debuggability.js:384:9) at Promise._resolveFromExecutor (/opt/shinobi/node_modules/bluebird/js/release/promise.js:518:18) at new Promise (/opt/shinobi/node_modules/bluebird/js/release/promise.js:103:10) at Client_MySQL._query (/opt/shinobi/node_modules/knex/lib/dialects/mysql/index.js:124:12) at Client_MySQL.query (/opt/shinobi/node_modules/knex/lib/client.js:158:17) at Runner.query (/opt/shinobi/node_modules/knex/lib/runner.js:135:36) at /opt/shinobi/node_modules/knex/lib/runner.js:39:23 at tryCatcher (/opt/shinobi/node_modules/bluebird/js/release/util.js:16:23) at /opt/shinobi/node_modules/bluebird/js/release/using.js:185:26 at tryCatcher (/opt/shinobi/node_modules/bluebird/js/release/util.js:16:23) at Promise._settlePromiseFromHandler (/opt/shinobi/node_modules/bluebird/js/release/promise.js:547:31) at Promise._settlePromise (/opt/shinobi/node_modules/bluebird/js/release/promise.js:604:18) at Promise._settlePromise0 (/opt/shinobi/node_modules/bluebird/js/release/promise.js:649:10) { code: 'ER_NOT_FORM_FILE', errno: 1033, sqlMessage: "Incorrect information in file: './ccio/Presets.frm'", sqlState: 'HY000', index: 0, sql: 'ALTER TABLE `Presets` CHANGE COLUMN `type` `type` VARCHAR(50) NULL DEFAULT NULL AFTER `details`;' } !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! This Install of Shinobi is NOT Activated !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2020-05-14T17:06:33-05:00 This Install of Shinobi is NOT Activated Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.