December 18, 20196 yr Hello everyone, I am trying to get my unRAID testing box up and running on my 10g network and I am having a problem. I cannot seem to get the NIC online. The card in question is: QNAP QXG-10G1T Single-port (10Gbase-T) 10GbE network expansion card, PCIe Gen3 x4 I downloaded the linux driver from Aquantia (now Marvell). The NIC controller is the AQC107. I haven't gotten the system to recognize the NIC, but I have verified that it works. So, I wanted to check here and see if I was doing something wrong or needed an unRAID dev team to include the driver in the next release? I saw a post about only popular/requested drivers get included to save space so that made me curious. Thanks!
December 19, 20196 yr 2 hours ago, Pedro85 said: Hello everyone, I am trying to get my unRAID testing box up and running on my 10g network and I am having a problem. I cannot seem to get the NIC online. The card in question is: QNAP QXG-10G1T Single-port (10Gbase-T) 10GbE network expansion card, PCIe Gen3 x4 I downloaded the linux driver from Aquantia (now Marvell). The NIC controller is the AQC107. I haven't gotten the system to recognize the NIC, but I have verified that it works. So, I wanted to check here and see if I was doing something wrong or needed an unRAID dev team to include the driver in the next release? I saw a post about only popular/requested drivers get included to save space so that made me curious. Thanks! Driver should already be present. Post diagnostics.zip from Tools/Diagnostics.
December 20, 20196 yr Author Alright, I still do not have the NIC showing up in the system device list nor where I can configure it in the UI. Only eth0 shows up, which is my 1Gb NIC in the mobo. The broadcom wireless NIC also shows up as a network controller under system devices. I have updated to unRAID 6.8.0, I have removed the NIC and re-tested it in a windows box (verified working), tried moving the NIC into a different PCIe port, verified the link lights are on when plugged in. I have attached my diagnostic data. Let me know if you want me to do a hardware profile also. Thank you!!! diagnostics.zip
December 20, 20196 yr Community Expert 10GbE NIC isn't being detected, besides the onboard gigabit I only see a wireless NIC, if possible try on a different board.
December 20, 20196 yr Author Thanks for the quick reply. Sadly, I don't have another board I could run unRAID on so I guess I am dead in the water on this project. 😭
December 20, 20196 yr Community Expert It would be just for testing, but most likely the NIC isn't working on that board, you can also look for a bios update if available and/or restore bios defaults.
April 21, 20215 yr Did you get it working in the end? I'm also looking into upgrading my network to 10Gbit, and this card is a good candidate.
April 21, 20215 yr Author 4 hours ago, BartDG said: Did you get it working in the end? I'm also looking into upgrading my network to 10Gbit, and this card is a good candidate. Sadly, not yet. As it turned out, the NIC just straight up doesn’t work with my motherboard and doing the BIOS update didn’t help. I’m currently building up a replacement server with newer hardware and larger storage drives. I have most of the hardware, just waiting on a cope things. I’ll post full specs of the server once I get it built and tested. Hopefully in the next month or so.
April 21, 20215 yr Thanks for the swift reply! I think I'll take a chance and order it then. My hardware is reasonably recent. If I have more news, I'll post it here too. Cheers!
Archived
This topic is now archived and is closed to further replies.