ryankenn Posted December 19, 2019 Share Posted December 19, 2019 This is a stupid question, but how do I create the folder clear-me on a specific drive? I access shares from Windows but I've never created a dedicated folder on a dedicated drive in my array before. My new server is having problems with the cache and I think its related to the fact its plugged into a PCI-E Sata card, not the board. I have one drive in my array that has no data and I want to remove it from the array and make it the cache to see if it resolves my issues being on board mounted SATA port. Thanks! Quote Link to comment
JorgeB Posted December 19, 2019 Share Posted December 19, 2019 The clear drive script it's not working correctly, or when it works it's extremely slow, with current Unraid release, if you want to do it you can still do it manually. Quote Link to comment
ryankenn Posted December 20, 2019 Author Share Posted December 20, 2019 I just started that process now, thanks for the heads up. Do I have to keep Telnet open during the process? Obviously right now I am but I see in the GUI the only indication I have that something is going on is I get spikes on the CPU cores. With single parity I can move the remaining drives to close the gap caused by removal of this drive correct, only Dual Parity doesn't like this? The disk being cleared is Disk 3 of 5. I was hoping to move 4/5 up a spot but not if it means rebuilding the parity again. I like these big drives but parity rebuilds take 26 hours for me at 10TB. Quote Link to comment
trurl Posted December 20, 2019 Share Posted December 20, 2019 6 minutes ago, ryankenn said: With single parity I can move the remaining drives to close the gap caused by removal of this drive correct Correct. Just New Config, make the assignments you want, being very careful to not assign a data disk to the parity slot, and check the box saying parity is already valid before starting the array. Quote Link to comment
ryankenn Posted December 20, 2019 Author Share Posted December 20, 2019 (edited) Great. And I should have no issue making the drive just cleared the new Cache I assume. This PCI-E sata card has been a big headache. In my config I took a screenshot before but I also have the benefit that my parity is 10TB, and I have (2) 6 and (2) 3TB data drives. Outside my initial question but are there threads here on good options for PCI-E expansion cards that work? This one is from Amazon and consistently created issues. It never relayed the Smart info in a regular way and made me think I had lost an SSD. Edited December 20, 2019 by ryankenn Quote Link to comment
JorgeB Posted December 20, 2019 Share Posted December 20, 2019 5 hours ago, ryankenn said: Outside my initial question but are there threads here on good options for PCI-E expansion cards that work? Any LSI with a SAS2008/2308/3008/3408 chipset in IT mode, e.g., 9201-8i, 9211-8i, 9207-8i, 9300-8i, 9400-8i, etc and clones, like the Dell H200/H310 and IBM M1015, these latter ones need to be crossflashed. 6 hours ago, ryankenn said: Do I have to keep Telnet open during the process? Yes, no need if you use Screen Quote Link to comment
ryankenn Posted December 22, 2019 Author Share Posted December 22, 2019 Thanks for the help. Got that drive out of the array and assigned to cache and everything is cruising now. I will have to look into those cards. With the 9XXX series that aren't clones do they need to be flashed, or just plug and play. Quote Link to comment
JorgeB Posted December 22, 2019 Share Posted December 22, 2019 7 hours ago, ryankenn said: With the 9XXX series that aren't clones do they need to be flashed, or just plug and play. Some need to be flashed (or should be flashed) from IR to IT mode, others are IT mode only, like the 9207-8i or 9300-8i for example. Quote Link to comment
mrbilky Posted December 22, 2019 Share Posted December 22, 2019 9 hours ago, ryankenn said: With the 9XXX series that aren't clones do they need to be flashed, or just plug and play. I have 2 of these and they were plug and play seller very reliable: https://www.ebay.com/itm/Dell-H310-6Gbps-SAS-HBA-w-LSI-9211-8i-P20-IT-Mode-for-ZFS-FreeNAS-unRAID/162834659601?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Quote Link to comment
ryankenn Posted January 6, 2020 Author Share Posted January 6, 2020 Thanks. I have the server up and stable now. I may revist putting the card in to access that additional 1TB but for now I'm doing alright, save for the 26 hour parity checks. Yikes! Quote Link to comment
Smily Posted November 20, 2020 Share Posted November 20, 2020 On 12/19/2019 at 7:30 AM, ryankenn said: This is a stupid question, but how do I create the folder clear-me on a specific drive? If someone could help? Thanks Quote Link to comment
trurl Posted November 20, 2020 Share Posted November 20, 2020 4 minutes ago, Smily said: If someone could help? Thanks How did you empty the drive? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.