Chrism2015 Posted October 8, 2022 Share Posted October 8, 2022 (edited) On 9/30/2022 at 4:18 AM, Hode said: Does anyone else get this error on unraid 6.11 Get VM Details for ip: https://192.168.*.* Failed Cannot read properties of undefined (reading 'children') Connected to mqtt broker Get VM Details for ip: https://192.168.*.* Failed Cannot read properties of undefined (reading 'children') Connected to mqtt broker and it keeps on repeating every second. I'm also getting this error however i am using the hashed address as my local ip's dont show anything Edited October 8, 2022 by Chrism2015 missing info 1 Quote Link to comment
1471 Posted October 11, 2022 Share Posted October 11, 2022 (edited) Similar issues as above since updating to Unraid 6.11.1. Looks like all the other controls have gone and can only see for Docker? Checked my Grafana dashboards and looks like the datas not being collected for VM's etc Looking at the logs, getting: Cannot read properties of undefined (reading 'children') Get VM Details for ip: 10.112.1.80 Failed Edited October 11, 2022 by 1471 1 Quote Link to comment
Luca1201 Posted October 19, 2022 Share Posted October 19, 2022 On 9/30/2022 at 5:18 AM, Hode said: Does anyone else get this error on unraid 6.11 Get VM Details for ip: https://192.168.*.* Failed Cannot read properties of undefined (reading 'children') Connected to mqtt broker Get VM Details for ip: https://192.168.*.* Failed Cannot read properties of undefined (reading 'children') Connected to mqtt broker and it keeps on repeating every second. i got the same issue since upgrading to 6.11 Quote Link to comment
SanderScamper Posted October 21, 2022 Share Posted October 21, 2022 Same issue. I also have no luck getting discovery to work with HA but I'm not sure if that's my fault. Quote Get VM Details for ip: https://192.168.1.194:14444 Failed Cannot read properties of undefined (reading 'children') Get VM Details for ip: https://192.168.1.194:14444 Failed Cannot read properties of undefined (reading 'children') Quote Link to comment
Maggi0r Posted October 21, 2022 Share Posted October 21, 2022 Hello after a long time I got the Unraid API up and running. I have no idea why it works now. However, what does not work 100% is the transfer to Homassinnstant using mqtt. A part like the array or the dockers are displayed in the HA, but and that would be the more important thing, the VMs are not displayed to me at all. I hope you have a tip for me. Greetings Maggi 1 Quote Link to comment
atoaster Posted October 21, 2022 Share Posted October 21, 2022 Hey everyone. I was having A LOT of the same problems with it connecting but not showing the VMs and dockers. So I uninstalled it and deleted its folder in appdata. Then reinstalled it and went to its web address. This time for the server IP address, I went to the my unraid server gui and copied that long address without the https:// and added the https port number because I have changed that long ago. So for example: server ip: "7c774ec45a66ee62fd9c99998df.unraid.net:8443". Then I selected https and continued with the root username and root password. 1 Quote Link to comment
SanderScamper Posted October 22, 2022 Share Posted October 22, 2022 (edited) @atoaster Thankyou for the tip about removing https://, I didn't realize it had pre-pended that so I had a leading https://https://. Not that it is now working, I'm still getting a 503 code fail error in the log. *edit scratch that 503 is auth and when I fixed that error, I got the children error again. Edited October 22, 2022 by SanderScamper Quote Link to comment
atoaster Posted October 23, 2022 Share Posted October 23, 2022 Have you uninstalled the docker, removed image and delete it's folder from app data? Also, is your port still 443 or have you changed it? Quote Link to comment
KinGSiZ3 Posted November 13, 2022 Share Posted November 13, 2022 Hey everybody, first let me say sorry for my english. Second this its ja really nice App, but since some day, dont lnow when i have a problem. Allways get the Error at Log Get VM Details for ip: 10.0.XXXXX Failed Cannot read properties of undefined (reading 'children') Its wars working all fine. Anybody have a hint how can i fix it. Greetz and thanks Quote Link to comment
giustanca Posted November 29, 2022 Share Posted November 29, 2022 (edited) Same exact problem as everyone in my installation too. The developer is totally absent. It would be better to delete its docker container, rather than continue to have it installed by users, who in the meantime are hacking around to figure out what's wrong. The problems have been going on for several months and there hasn't been any remedial action or even an interest from the developer. His last speech is on July 24 (more than 5 months ago). Edited November 29, 2022 by giustanca Quote Link to comment
ElectricBrainUK Posted November 29, 2022 Author Share Posted November 29, 2022 (edited) Hi everyone, sorry for my absence here. I appreciate that it has not been working since 6.11, I will produce a final update to fix the issue at some point but I don't have much time at the moment with other projects and my job. Then I will deprecate it as I no longer have the time to work on this. I won't remove it from the app store as there are plenty of people who still need it's functionality and although i haven't been active here I have been somewhat active on the discord still. I may leave it active until unraid make their official API available. Plus it still works on older unraid versions. The application is open source so others are welcome to make changes as well! Edited November 29, 2022 by ElectricBrainUK typo 6 Quote Link to comment
deputyd0ng Posted January 10, 2023 Share Posted January 10, 2023 On 11/29/2022 at 2:41 PM, ElectricBrainUK said: Hi everyone, sorry for my absence here. I appreciate that it has not been working since 6.11, I will produce a final update to fix the issue at some point but I don't have much time at the moment with other projects and my job. Then I will deprecate it as I no longer have the time to work on this. I won't remove it from the app store as there are plenty of people who still need it's functionality and although i haven't been active here I have been somewhat active on the discord still. I may leave it active until unraid make their official API available. Plus it still works on older unraid versions. The application is open source so others are welcome to make changes as well! Thanks for all your work. Any word on an official API? even MQTT or something like hass.agent or mqtt for octoprint is much better than rest IMO Quote Link to comment
skank Posted January 28, 2023 Share Posted January 28, 2023 I'm having problems. I changed my ipadress of my server running unraid api Now i restarted the api and i want to change the ipadress and try to log in but nothing happens i enter the ipadress , root login and pasword but i dont get anything no error, but no progress either any ideas? Quote Link to comment
skank Posted January 29, 2023 Share Posted January 29, 2023 21 hours ago, skank said: I'm having problems. I changed my ipadress of my server running unraid api Now i restarted the api and i want to change the ipadress and try to log in but nothing happens i enter the ipadress , root login and pasword but i dont get anything no error, but no progress either any ideas? Nevermind, fixed it by deleting app and reinstalling, couldnt reconnect with different server once connected Fixed Quote Link to comment
mattw Posted January 29, 2023 Share Posted January 29, 2023 (edited) So, I have developed a problem with data gathering in Home Assistant. Bear in mind that this had been working fine, not sure if the latest HA updates or Unraid API updates broke it. I get all of the switches for my dockers and the capacity of my array, but I have lost the data for [sensor.unraid_array_protection] and [sensor.unraid_array_status] both have become unknown in HA. Both of these sensors do populate for a split second from time to time, and then revert almost instantly to unknown in developer tools in HA. I should add that I am on 6.11.5 Unraid Plus and 2023.1.7 of HA. The part that leads me to believe that this may be an Unraid side issues is that the API connection to my server, after login, only shows my server dockers it now does not list VMs, Utils and server status. I am still seeing the MQTT traffic from Unraid that includes the cpu type, mobo model, memory size, disk space , unraid version It appears that from time to time the MQTT data from Uraid is correct. And that sometimes it is truncated. Here is my post on the Home Assistant forums. https://community.home-assistant.io/t/unraid-api-connect-and-control-unraid-servers-through-home-assistant-via-mqtt/154198/62?u=mattlward Edited January 29, 2023 by mattw Quote Link to comment
JeanLuc Posted February 12, 2023 Share Posted February 12, 2023 Can confirm, experiencing the same issue after connecting using the **hash.myunraid.net** and the local IP connections. All of the switches (docker, paritycheck, power_off, reboot, array) and binary_sensors.unraid_server are visible in mqtt/hass. Within the API GUI, only docker is available. The API logs continue to repeat the same error: Get VM Details for ip: https://192.168.1.81 Failed Cannot read properties of undefined (reading 'children') Quote Link to comment
BoKKeR Posted April 10, 2023 Share Posted April 10, 2023 (edited) I started rewriting the project from scratch since it wouldnt build anymore ( I am not the author ). The last updates were years ago. Here is a quick fix for those who just want the VMs to work. FOR NOW mount utils: In the file utils/Unraid.js change the children to be [0] [0] [0], instead of [0] [0] [1] on lines 705/706 (might be different line but you see it on the screenshot) Restart the container. There are many extra functionalities I might not support like swap gpu, update xml, I just dont see the point of them? I will try to focus on just start/stop/reset on VM, docker. List pcie devices Edited April 10, 2023 by BoKKeR 2 Quote Link to comment
ASHway Posted April 11, 2023 Share Posted April 11, 2023 11 hours ago, BoKKeR said: I started rewriting the project from scratch since it wouldnt build anymore ( I am not the author ). The last updates were years ago. Here is a quick fix for those who just want the VMs to work. FOR NOW mount utils: In the file utils/Unraid.js change the children to be [0] [0] [0], instead of [0] [0] [1] on lines 705/706 (might be different line but you see it on the screenshot) Restart the container. There are many extra functionalities I might not support like swap gpu, update xml, I just dont see the point of them? I will try to focus on just start/stop/reset on VM, docker. List pcie devices You are a life saver! Finally I can control my VMs using Home Assistant. 1 Quote Link to comment
jacauc Posted May 10, 2023 Share Posted May 10, 2023 On 4/10/2023 at 5:19 PM, BoKKeR said: I started rewriting the project from scratch since it wouldnt build anymore ( I am not the author ). The last updates were years ago. Do you have a beta/testing version of this yet? Quote Link to comment
BoKKeR Posted May 10, 2023 Share Posted May 10, 2023 (edited) 6 minutes ago, jacauc said: Do you have a beta/testing version of this yet? I have paused the project since I believe that unraid team should be releasing their graphQL api soon. The quickfix thats posted still works Edited May 10, 2023 by BoKKeR Quote Link to comment
song Posted June 19, 2023 Share Posted June 19, 2023 (edited) On 2023/5/10 at PM10点53分, BoKKeR said: 我已经暂停了这个项目,因为我相信 unraid 团队应该很快发布他们的 graphQL api。发布的 quickfix 仍然有效 I would like to know where you got the news. The "unraid" team seems not interested in their API connecting to home assistant. They are currently focusing on developing their "unraid net", which is not meaningful for me personally. I would rather "unraid" appear on my home assistant dashboard, I am actually looking forward to one day not having to use third-party tools to access the home assistant to monitor my "unraid" host status and control virtual machines and containers, but I think this is very far away! Edited June 20, 2023 by song Quote Link to comment
BoKKeR Posted June 20, 2023 Share Posted June 20, 2023 6 hours ago, song said: I would like to know where you got the news. The "unraid" team seems not interested in their API connecting to home assistant. They are currently focusing on developing their "unraid net", which is not meaningful for me personally. I would rather "unraid" appear on my home assistant dashboard, I am actually looking forward to one day not having to use third-party tools to access the home assistant to monitor my "unraid" host status and control virtual machines and containers, but I think this is very far away! I agree, had an interview early 2023 with the unraid team and they only talked about working on unraid plugin and the different ways to monetise it. As in one-click SSL for people who cant set it up etc. It really put me off from this product since the UI needs a remake as its made in multiple different languages and technologies but the focus was not there. It SEEMS that with the plugin they introduced a graphQL api on unraid, and I vaguely remember reading a comment that they want to make it public but I cant find this comment on the forum. Quote Link to comment
PilaScat Posted July 7, 2023 Share Posted July 7, 2023 Now with unraid 6.12 it shows: There was a problem retrieving a field for a docker image Cannot read properties of undefined (reading '0') Quote Link to comment
TypeError Posted July 12, 2023 Share Posted July 12, 2023 On 5/10/2023 at 9:53 AM, BoKKeR said: I have paused the project since I believe that unraid team should be releasing their graphQL api soon. The quickfix thats posted still works Do you happen to have any more info on an unRAID GQL server or maybe where I can get more information about it? I don't currently see any official APIs I can use to control unRAID. I'm hoping this is a GQL instance on the local unRAID and not just a hosted solution / connect related. Quote Link to comment
BoKKeR Posted July 12, 2023 Share Posted July 12, 2023 1 hour ago, TypeError said: Do you happen to have any more info on an unRAID GQL server or maybe where I can get more information about it? I don't currently see any official APIs I can use to control unRAID. I'm hoping this is a GQL instance on the local unRAID and not just a hosted solution / connect related. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.