RJGamer1002 Posted December 30, 2019 Share Posted December 30, 2019 one of my 8tb drives is acting up. i tried to add it to my array as a disk drive and it was replacing a 2tb drive that was going to be in a new computer build and was going to buy a new drive at some point as a parity so that all data will be protected. when i put the drive in as a replacement drive. it accepted it. but after a few mins of recovering the drive it got disabled. the email i got said it was in a error state/ or read error. so, i just restarted the array and added the 2tb drive back and it's right now rebuilding to the parity drive. i have tried to see if smart can see any error and it just stuck at 90%. it has a history of UDMA CRC error. this drive is brand new too tower-diagnostics-20191229-1945.zip Quote Link to comment
JorgeB Posted December 30, 2019 Share Posted December 30, 2019 Try again after replacing the SATA cable. Quote Link to comment
RJGamer1002 Posted December 30, 2019 Author Share Posted December 30, 2019 well the thing is it a dell r710 server so it only has slots not cables Quote Link to comment
JorgeB Posted December 30, 2019 Share Posted December 30, 2019 Then try a another slot. Quote Link to comment
RJGamer1002 Posted December 30, 2019 Author Share Posted December 30, 2019 i have moved it but still has issues Quote Link to comment
JorgeB Posted December 30, 2019 Share Posted December 30, 2019 CRC errors are a communication problem, but the disk could have other issues, run an extended SMART test or try another disk. Quote Link to comment
RJGamer1002 Posted December 31, 2019 Author Share Posted December 31, 2019 Ok i will try that and I try to switch it with another drive and it doing the same thing so I think their something with the wire or slots or their dirt in the slot Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.