January 1, 20206 yr I have reconfigured my second backup server into a new chassis, however I am still using the same motherboard I was when it was a tower config. The motherboard is an Asus P8Z68-V PRO. I was using three HBA's in the old setup, one Dell Perc H310 flashed to IT mode and two Super Micro SAS2LP cards. Everything was working ok but I started experiencing issues with disks and suspected the SAS2LP cards as the culprit. I now have two new HBA's and the same Perc H310, issue is that I can only get the system working where it recognizes the drives on two of the controllers. No matter how I swap the cards around, I can get the system working with cards in slots 1 and 3 but as soon as I put a card in slot 2, the system only sees the card in slot 1. Not sure why. I am attaching two configs one with all three cards in, the other with only two. Not sure if they will show much. I upgraded to 6.8 from 6.7 to see if that would make a difference, it did not. backup_tower-diagnostics-20200101-1641.zip backup_tower-diagnostics-20200101-1637.zip
Archived
This topic is now archived and is closed to further replies.