ashman70 Posted January 1, 2020 Share Posted January 1, 2020 I have reconfigured my second backup server into a new chassis, however I am still using the same motherboard I was when it was a tower config. The motherboard is an Asus P8Z68-V PRO. I was using three HBA's in the old setup, one Dell Perc H310 flashed to IT mode and two Super Micro SAS2LP cards. Everything was working ok but I started experiencing issues with disks and suspected the SAS2LP cards as the culprit. I now have two new HBA's and the same Perc H310, issue is that I can only get the system working where it recognizes the drives on two of the controllers. No matter how I swap the cards around, I can get the system working with cards in slots 1 and 3 but as soon as I put a card in slot 2, the system only sees the card in slot 1. Not sure why. I am attaching two configs one with all three cards in, the other with only two. Not sure if they will show much. I upgraded to 6.8 from 6.7 to see if that would make a difference, it did not. backup_tower-diagnostics-20200101-1641.zip backup_tower-diagnostics-20200101-1637.zip Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.