Ginfrecss Posted January 11, 2020 Share Posted January 11, 2020 (edited) Hi, I'm using Unraid version 6.8.0 as seen in the screenshot in attached. Everything is working great, just fine actually ! I have an array and 2 VMs that start automatically. Working fine ! I have noticed today that I get the following 2 errors during boot of Unraid that I never noticed before. It doesn't seem to affect anything, but was curious if anyone could tell me why and how to fix it ! error: failed to connect to the hypervisor error: Failed to connect socket to '/var/run/libvirt/libvirt-sock': No such file or directory Please see attached photo as for reference. Any help would be greatly appreciated ! Edited January 11, 2020 by Ginfrecss Link to comment
Melo Posted January 17, 2020 Share Posted January 17, 2020 Same here. Not sure if it is since 6.8.0, but when I boot in GUI mode the GUI won‘t show up and it stays in the command line as seen on the picture you have attached. Does your Unraid Server behave the same when booting in GUI mode? Link to comment
itimpi Posted January 17, 2020 Share Posted January 17, 2020 1 hour ago, Melo said: Same here. Not sure if it is since 6.8.0, but when I boot in GUI mode the GUI won‘t show up and it stays in the command line as seen on the picture you have attached. Does your Unraid Server behave the same when booting in GUI mode? if you login at the prompt and use the df command does it show something mounted as /boot? Link to comment
subivoodoo Posted January 17, 2020 Share Posted January 17, 2020 Same here, also after update to Unraid 6.8.1 But all my VM's runs well... df tells: /dev/sda1 30016160 605280 29410880 3% /boot Link to comment
stor44 Posted January 18, 2020 Share Posted January 18, 2020 Hi, I'm seeing the same hypervisor error as shown in the first post. I think it started with 6.8.0, but can't confirm that. My VMs are working. Link to comment
jpowell8672 Posted January 19, 2020 Share Posted January 19, 2020 error: failed to connect to the hypervisor I also get this error on boot with 6.8 & 6.8.1, everything seems to be working OK though. Link to comment
Melo Posted January 21, 2020 Share Posted January 21, 2020 On 1/17/2020 at 2:24 PM, itimpi said: if you login at the prompt and use the df command does it show something mounted as /boot? Yes, /dev/sdb1 mounted on /boot Link to comment
Chrisw Posted January 23, 2020 Share Posted January 23, 2020 Same here df shows dev/sda1 7823420 518884 7304536 7% /boot Link to comment
Ricin Posted January 27, 2020 Share Posted January 27, 2020 Getting same thing was happening with 6.8.1 and just updated to 6.8.2. I run 2 VMs they seem to run fine. Link to comment
Sosk91 Posted February 15, 2020 Share Posted February 15, 2020 I have the same problem. Yet libvirt-sock exists ? My terminal : root@AAA:~# ls /var/run/libvirt/ hostdevmgr/ libvirt-sock-ro= nodedev/ secrets/ virtlockd.pid interface/ libvirtd.pid nwfilter/ storage/ virtlogd-admin-sock= libvirt-admin-sock= lockd/ nwfilter-binding/ virtlockd-admin-sock= virtlogd-sock= libvirt-sock= network/ qemu/ virtlockd-sock= virtlogd.pid root@AAA:~# ls -lh /var/run/libvirt/ total 12K drwxrwxrwx 2 root root 40 Feb 15 16:20 hostdevmgr/ drwx------ 2 root root 60 Feb 15 16:20 interface/ srwx------ 1 root users 0 Feb 15 16:20 libvirt-admin-sock= srwxrwx--- 1 root users 0 Feb 15 16:20 libvirt-sock= srwxrwxrwx 1 root users 0 Feb 15 16:20 libvirt-sock-ro= -rw-r--r-- 1 root root 5 Feb 15 16:20 libvirtd.pid drwxr-xr-x 2 root root 40 Dec 20 22:53 lockd/ drwxr-xr-x 2 root root 140 Feb 15 16:20 network/ drwx------ 2 root root 60 Feb 15 16:20 nodedev/ drwx------ 2 root root 60 Feb 15 16:20 nwfilter/ drwx------ 2 root root 40 Feb 15 16:20 nwfilter-binding/ drwxr-xr-x 4 root root 120 Feb 15 16:20 qemu/ drwx------ 2 root root 60 Feb 15 16:20 secrets/ drwxrwxrwx 2 root root 80 Feb 15 16:20 storage/ srwx------ 1 root root 0 Feb 15 16:20 virtlockd-admin-sock= srwx------ 1 root root 0 Feb 15 16:20 virtlockd-sock= -rw-r--r-- 1 root root 5 Feb 15 16:20 virtlockd.pid srwx------ 1 root root 0 Feb 15 16:20 virtlogd-admin-sock= srwx------ 1 root root 0 Feb 15 16:20 virtlogd-sock= -rw-r--r-- 1 root root 5 Feb 15 16:20 virtlogd.pid Link to comment
Sosk91 Posted February 15, 2020 Share Posted February 15, 2020 Did you start libvirtwol... in the bar at the bottom of the array? Link to comment
Ginfrecss Posted February 15, 2020 Author Share Posted February 15, 2020 1 hour ago, Sosk91 said: Did you start libvirtwol... in the bar at the bottom of the array? Bar at the bottom of the array ? Can you specify where exactly ? Link to comment
Sosk91 Posted February 15, 2020 Share Posted February 15, 2020 Bottom bar (array started) Link to comment
Ginfrecss Posted February 15, 2020 Author Share Posted February 15, 2020 Non sure how to start libvirtwol ? The array and parity are started with no errors reported. Link to comment
Sosk91 Posted February 15, 2020 Share Posted February 15, 2020 The array and parity it's my action. Libvirtwol is a plugin, and they don't start, but I'm waiting for the end of the parity to restart Unraid and see if it's still Link to comment
Sosk91 Posted February 15, 2020 Share Posted February 15, 2020 (edited) I'm a newbie to UNRAID, so far it's been pretty stable but I made some changes this morning. Since then I get this error message at startup and especially this plugin that doesn't start anymore. Edited February 15, 2020 by Sosk91 Link to comment
Squid Posted February 15, 2020 Share Posted February 15, 2020 4 minutes ago, Sosk91 said: Since then I get this error message at startup and especially this plugin that doesn't start anymore. It's the Virtual BMC portion of the plugin that doesn't start up, and you're best posting in the support thread for the plugin regarding all this. (There's a support link within the Plugins Tab for it) Link to comment
Ginfrecss Posted February 15, 2020 Author Share Posted February 15, 2020 What is BMC ? I have a vanilla Unraid install i.e no plugins installed from me..and I'm getting this error. Link to comment
Sosk91 Posted February 15, 2020 Share Posted February 15, 2020 Yeah, I'm waiting for a restart. We're here for the first post problem. (my bad) Link to comment
Squid Posted February 15, 2020 Share Posted February 15, 2020 2 minutes ago, Ginfrecss said: What is BMC ? I have a vanilla Unraid install i.e no plugins installed from me..and I'm getting this error. I was replying to the quoted post. But if you're truly a vanilla install, then post your diagnostics Link to comment
MothyTim Posted March 10, 2020 Share Posted March 10, 2020 Has anyone worked out what is causing this? Now on 6.8.3 and have the same error and to my knowledge no libvirtwol plug-in installed. df shows /dev/sdf1 mounted at boot, which is my flash drive! tower-diagnostics-20200310-1221.zip Link to comment
JesterEE Posted March 20, 2020 Share Posted March 20, 2020 I traced this issue to the installation of the VM Backup Plugin. I will be cross posting in that thread about this issue. -JesterEE 2 Link to comment
Ustrombase Posted May 11, 2020 Share Posted May 11, 2020 I'm having this exact same issue. My VM tab is not even present in the WebUI. This happened after I had a strange issue with unRAID where I could not access the WebUI nor ssh, so had to force restart unRAId. After the restart now i see this same error and in the WebUI i can't see my VM tab. Link to comment
methanoid Posted May 20, 2020 Share Posted May 20, 2020 On 3/20/2020 at 2:23 AM, JesterEE said: I traced this issue to the installation of the VM Backup Plugin. I will be cross posting in that thread about this issue. -JesterEE Hi New install a couple of days ago and installed lots of plugins and 3 VMs. After a force restart I have the same errors on boot and cannot access webUI. You say you traced it to this plugin which I do have but what makes you think its that? I saw your post on the plugin thread but I see nothing to indicate why you are sure this is the cause? And is there a repair other than reinstall ALL MY UNRAID AGAIN!? Please no... Link to comment
JesterEE Posted May 20, 2020 Share Posted May 20, 2020 2 hours ago, methanoid said: Hi New install a couple of days ago and installed lots of plugins and 3 VMs. After a force restart I have the same errors on boot and cannot access webUI. You say you traced it to this plugin which I do have but what makes you think its that? I saw your post on the plugin thread but I see nothing to indicate why you are sure this is the cause? And is there a repair other than reinstall ALL MY UNRAID AGAIN!? Please no... I disabled all my plugins and restarted. Then I enabled one plugin at a time and restarted till it popped up. As soon as I turned on the VM Backup plugin it started happening. I disabled all the other plugins and restarted (keeping the VM Backup plugin enabled) and restarted. Still there. Check with the VM Backup plugin support thread to see if there is any info on an update there. If not, no, there is no "repair" and a reinstall won't help. 1 Link to comment
Recommended Posts