January 11, 20206 yr Community Expert I've seen some errors on a drive and ran the short SMART test. Got some error messages. Log below. Any thoughts? https://pastebin.com/ZYKthQtQ
January 12, 20206 yr Community Expert Try running an extended SMART test, but there are a lot of read raw errors and UNC @ LBA errors, that disk looks to be on its way out. P.S. please always attach files directly to forum, don't use external sites.
January 12, 20206 yr Author Community Expert Thanks. I went ahead and replaced the drive. Started to rebuild parity, but now face a new issue. Disk 13 shows errors during parity build. It doesn't disable the driver, but don't think it will be good to rebuild parity as long as there are errors. Also, the parity rebuild turns incredibly slow. I have changed the cable of disk 13 to exclude that it is a cable error. I am attaching diagnostic log. Any thoughts? tower-diagnostics-20200113-0218.zip
January 13, 20206 yr Community Expert Looks more like a connection problem, there's not even a SMART report, check/replace cables on disk13 and post SMART report or try rebuilding again.
Archived
This topic is now archived and is closed to further replies.