January 12, 20206 yr Hi Guys, Yesterday I got some write errors on one drive and I got the message, drive disabled, content emulated. I ran a short smart test and a long smart test and the drive returned that it was fine. I successfully rebuilt the content of the drive overnight with the same drive. After that, I tried to add more data to the drive and the drive threw more write errors. I am a bit at a loss here. Is the controller LSI9207-8i shot or is the drive bad despite no smart errors ? Here are the diagnostics. Can you please have a look and let me know what you guys see ? galactica-diagnostics-20200112-1458.zip
January 13, 20206 yr Swap cables/slot on that disk with a different one, then see if issue persists and if it follows the disk or not.
January 13, 20206 yr Author 8 hours ago, johnnie.black said: Swap cables/slot on that disk with a different one, then see if issue persists and if it follows the disk or not. I swap cables and the location of the drive wit the controller, same issue... Should I conclude that the drive is dying/dead despite not reporting issues in Smart ?
January 13, 20206 yr 3 minutes ago, starbetrayer said: Should I conclude that the drive is dying/dead despite not reporting issues in Smart ? Most likely, some issues are not visible on SMART.
January 13, 20206 yr Author 5 minutes ago, johnnie.black said: Most likely, some issues are not visible on SMART. @johnnie.black, thank you for your help again. You rock.
Archived
This topic is now archived and is closed to further replies.