Jump to content
Sign in to follow this  
Troussdesoin

Removing cache pool

2 posts in this topic Last Reply

Recommended Posts

Hi there,

 

I have problem with my cache pool and want to remove the two SSDs i have right now in BTFRS (raid 1 i think) with only 1 big ssd.

I read the faq and they talk about removing a drive from the cache pool but they say to not go below the requirement of the pool. In my case the requirement would be 2 drives minimum. So how do i do it?

 

Would

1. set All shares to "no" in use cache disk.

2. Activate the mover to remove the data from the cache disk.

3 stop the array.

4.pull the disks.

5 insert the new ssd.

6. Set the shares i want to 'yes' in use cache disk.

7. reactivate the mover?

 

Btw in the faq it says for the 1 disk, remove or upgrade procedure, to set the shares to 'yes' in use cache disk , is it a typo?

 

thanks a lot.

Share this post


Link to post
39 minutes ago, Troussdesoin said:

Btw in the faq it says for the 1 disk, remove or upgrade procedure, to set the shares to 'yes' in use cache disk , is it a typo?

Nope. You need to follow the FAQ as written for the remove or upgrade procedure. Turn on the GUI help and read the descriptions of what the different cache modes do.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this