Alexandro Posted January 16, 2020 Share Posted January 16, 2020 (edited) Hi there, In need of some help here. During the scheduled monthly parity check one of the disks has thrown a bunch of errors and consequently disabled by the system. The disk has passed the short smart self test and then successfully rebuilt by the parity. The system is in a working state now. Due to change of the temperature environment of the place (it is now 22 degrees Celsius) first guess was that I am facing a heat related issue. It deserves to be mentioned the SAS controller is installed next to a DVB-S card which by default runs hot. Would appreciate any comments regarding to the situation and what was the trigger of this event. Diagnostics file attached. Hardware configuration in my signature. Thank you very much in advance. unraid-diagnostics-20200116-0748.zip Edited January 16, 2020 by Alexandro Quote Link to comment
JorgeB Posted January 17, 2020 Share Posted January 17, 2020 Difficult to say if it was a disk or connection issue, I would swap cables/slot between that disk and another to rule out connection issues if it happens again to the same disk. Quote Link to comment
Alexandro Posted January 17, 2020 Author Share Posted January 17, 2020 Thanks for your input. May I exclude a disk/cable issue as the rebuilding process (with the same disk) finished successfully? Quote Link to comment
JorgeB Posted January 17, 2020 Share Posted January 17, 2020 Not really, since it can fail again in an hour, or one month from now, but if you swap cables and the same disk fails again in the near future you then know it's not a cable problem, and most likely the disk. Quote Link to comment
Alexandro Posted January 17, 2020 Author Share Posted January 17, 2020 Thank you! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.