Blairwin Posted January 18, 2020 Share Posted January 18, 2020 (edited) I'm having an issue with very slow read speeds from one of my drives. I don't believe the entire array is affected, it looks like just one drive. When I'm reading I get less than 5MB/s speed. It's painfully slow. Configuration is local server and local PC, two separate computers. I'm not trying to run a VM from Unraid, this is a separate computer. I have nothing else active right, no VMs or Dockers having disk activity. I've tried suggestions from this post and it didn't work: ethtool info: root@Bernard:/mnt/user/Games# ethtool bond0 Settings for bond0: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Port: Other PHYAD: 0 Transceiver: internal Auto-negotiation: off Link detected: yes EDIT: Apparently my 5MB/s speed was due to the terrible game I was trying to load. Normal speeds are around 60-70 which is still much slower than what they should be. bernard-diagnostics-20200117-2149.zip Edited January 18, 2020 by Blairwin Quote Link to comment
JorgeB Posted January 18, 2020 Share Posted January 18, 2020 If it's just from one drive the drive itself could be the problem, run a test with the diskspeed docker. Quote Link to comment
Blairwin Posted January 18, 2020 Author Share Posted January 18, 2020 14 hours ago, johnnie.black said: If it's just from one drive the drive itself could be the problem, run a test with the diskspeed docker. Apparently its the game. It has terrible speed from a network drive apparently as other games aren't having a problem. Diskspeed shows the disk having 100+MB/s speed so it's not a disk issue. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.