January 18, 20206 yr Have been having a rough week with my unraid server. earlier in the week, tried to add a few drives to my server and had a disk controller problem I went through the hardware compatability wiki for pci sata controllers and bought this one: https://www.ebay.com/itm/LSI-SAS-9207-8i-SATA-SAS-6Gb-s-PCI-E-3-0-Host-Bus-Adapter-IT-Mode-SAS9207-8i-US/123713611833?hash=item1ccde7e839:g:AC4AAOSwUvFcna9y At first, all drives showed up on bios and when i powered up unraid they were all there. I received a few udma crc errors, but i acknowledged them and ran a parity check. more udma errors occured and one of my 3 data disks became disabled. I switched the cables from both sas ports to make sure it wasn't a cable problem but having same errors. the bios shows that the pci card is actually a 9207-8i. I've attached the diagnostics. Did I get another crap card? What card and buyer would you guys recommend? Could this be a mobo issue? Please help. nasgard-diagnostics-20200118-1711.zip
January 18, 20206 yr Maybe do a memtest just to be safe its not ram, its unlikely but no harm in doing a quick check?
January 18, 20206 yr This is what your logs are picking up for the SAS card: Jan 18 16:42:36 Nasgard kernel: mpt2sas_cm0: LSISAS2308: FWVersion(20.00.00.00), ChipRevision(0x05), BiosVersion(07.39.00.00) FW 20.00.00.00 has issues along with FW 20.00.04.00 The most current version is FWVersion(20.00.07.00) (reliable) so I'd be reflashing the card in the first instance. Edited January 18, 20206 yr by Decto
January 19, 20206 yr Author 1 hour ago, Decto said: This is what your logs are picking up for the SAS card: Jan 18 16:42:36 Nasgard kernel: mpt2sas_cm0: LSISAS2308: FWVersion(20.00.00.00), ChipRevision(0x05), BiosVersion(07.39.00.00) FW 20.00.00.00 has issues along with FW 20.00.04.00 The most current version is FWVersion(20.00.07.00) (reliable) so I'd be reflashing the card in the first instance. Man, I hope it's something like this. The unraid hardware wiki said this should work ootb but I'm willing to try.
January 19, 20206 yr Author 3 hours ago, PeteAsking said: Maybe do a memtest just to be safe its not ram, its unlikely but no harm in doing a quick check? Will try.
January 19, 20206 yr Community Expert Firmware 20.00.00.00 is known to give a lot of CRC errors, so updating to latest will fix that.
January 19, 20206 yr Author Thank you. How do I go about upgrading? I'm not running a VM. Can't seem to find the file?
January 19, 20206 yr Community Expert Just download latest firmware package from Broadcom's support site, you then need to use Windows or Dos for the actual update.
January 19, 20206 yr Author 9 hours ago, johnnie.black said: Just download latest firmware package from Broadcom's support site, you then need to use Windows or Dos for the actual update. My unraid server doesn't have a windows vm. The linux version of the file is only 20.00.00.00 but has the same creation date as 20.00.07. How do i install the firmware onto the unraid server?
January 19, 20206 yr I wouldn't even try to update from a vm. Get a spare USB pen, use RUFUS (free download) to make it bootable. Copy the files to the pen drive Power off Replace the Unraid pen drive with the new one Boot into DOS Following the DOS flashing instructions Power off Swap back to unraid USB Boot
January 19, 20206 yr Author 50 minutes ago, Decto said: I wouldn't even try to update from a vm. Get a spare USB pen, use RUFUS (free download) to make it bootable. Copy the files to the pen drive Power off Replace the Unraid pen drive with the new one Boot into DOS Following the DOS flashing instructions Power off Swap back to unraid USB Boot Awesome. Will try it out. Thank you.
January 20, 20206 yr Author got the firmware updated. Didn't get greeted w/a ton of udma crc errors (fingers crossed). Currently rebuilding array due to the disabled disk. Hope this works.
January 21, 20206 yr 21 hours ago, omartian said: got the firmware updated. Didn't get greeted w/a ton of udma crc errors (fingers crossed). Currently rebuilding array due to the disabled disk. Hope this works. Let us know so we can all learn
January 21, 20206 yr Author 20 hours ago, PeteAsking said: Let us know so we can all learn Disabled disk rebuilt and now part of the array with a sweet green dot next to it. Just finished a parity check and have zero sync errors. Success! Thanks to everyone in this thread that helped me through this.
Archived
This topic is now archived and is closed to further replies.