Melocco Posted January 21, 2020 Share Posted January 21, 2020 I know this is a simple thing to do, but I can't figure it out. I accidentally pulled one of my array drives out (hotswap) while it was running. I was trying to pull another drive out that was an unassigned drive. Now I can't figure out how to add that drive back. I've pulled the drive and put it back (unassigned sees it) , restarted unraid, stopped the array, only thing I seen was to change the drive. Only problem is that I don't have an extra 8tb drive available to swap. Last time (by accident) I pulled a drive, it was a 4tb and I had a spare. I just swapped it and it rebuilt. Please let me know if there is anything I can do to put the same drive back. Thank you in advance. Quote Link to comment
JorgeB Posted January 21, 2020 Share Posted January 21, 2020 https://wiki.unraid.net/Troubleshooting#Re-enable_the_drive Make sure emulated disk is mounting correctly before rebuilding on top. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.