February 8, 20242 yr Latest Bitnami-openldap you released on 2/02/2024 is failing during installation with the following error: cannot create directory '/bitnami/openldap/data': Permission denied How can we get past this? Thank you,
February 8, 20242 yr Hey guys, I need help setting up a backup. I have all my storage setup pointing to my B2 locations with the correct keys and locations, but when I go to setup a backup I get this error in the log "INFO STORAGE_ENCRYPTED The storage is encrypted with a password" what password am I missing and where do I need to enter it?
February 8, 20242 yr On Backblaze_Personal_Backup, I do not see a D drive. I only see a C and a Z. Also, when I try to point the temp folder for it at z:\anything (or z:\d_drive\temp, even), I get a message telling me that backblaze doesn't have read/write access to that folder. However, it's a folder that I applied chmod777 to, even. Not sure where to go from here--- has anyone else ran into this?
February 8, 20242 yr HI i need a little help with duplicacy. When i try to restore a file i get this “ERROR RESTORE_CHOWN Failed to change uid or gid: lchown” Im being told in this topic that is becurse the container is been running as a specefic user. Dont know if this could help? https://medium.com/redbubble/running-a-docker-container-as-a-non-root-user-7d2e00f8ee15 I made this topic https://forum.duplicacy.com/t/restore-gui-fails-failed-to-set-the-modification-time-chtimes/8433/2 And another has the same problem https://forum.duplicacy.com/t/failed-to-change-uid-or-gid-restore-failure/6107?fbclid=IwAR3UwTViM2yyYxinvuhOCbuplD96ydLtnwxhLGITFtmp9O9i_EipM1gGnmc Any good ideas? Thanks!
February 9, 20242 yr Duplicacy have Version 1.8 released, can you update your Version? https://forum.duplicacy.com/t/duplicacy-web-edition-1-8-0-releases/8419
February 10, 20242 yr 13 hours ago, Revan335 said: Duplicacy have Version 1.8 released, can you update your Version? https://forum.duplicacy.com/t/duplicacy-web-edition-1-8-0-releases/8419 Am i looking the wroung place? Just did a "Check for updates" But no updates?
February 10, 20242 yr Can you update the Template with the new Options/Tags ...? https://forum.duplicacy.com/t/how-to-use-recent-duplicacy-web-release-in-a-docker-container/8443 Or make Options for mini and Latest/Stable by the Install from the CA.
February 10, 20242 yr 4 hours ago, DanielPT said: Am i looking the wroung place? Yes, that's the CLI Version.https://forum.duplicacy.com/t/duplicacy-cli-3-2-3-release/8019/1 The 1.8.0 is the Web/GUI Version.
February 10, 20242 yr 49 minutes ago, Revan335 said: Yes, that's the CLI Version.https://forum.duplicacy.com/t/duplicacy-cli-3-2-3-release/8019/1 The 1.8.0 is the Web/GUI Version. Okay so I make an envoriment variable with DUPLICACY_WEB_VERSION And set it to 1.8.0 Is that stable version? 😊
February 10, 20242 yr 38 minutes ago, DanielPT said: Okay so I make an envoriment variable with DUPLICACY_WEB_VERSION And set it to 1.8.0 Is that stable version? 😊 I would say yes. Its that true can only say the Developer. You would set mini tag too. saspus/duplicacy-web:mini "Than we are waiting for the published of 1.8.0 over the latest Version from duplicacy.com URL. https://duplicacy.com/latest_web_version for all."
February 10, 20242 yr 3 hours ago, Revan335 said: I would say yes. Its that true can only say the Developer. You would set mini tag too. saspus/duplicacy-web:mini "Than we are waiting for the published of 1.8.0 over the latest Version from duplicacy.com URL. https://duplicacy.com/latest_web_version for all." Oh sorry i dont quit understand this? What is web:mini? Is it no the full version like i run today? Why does it not just update with saspus/duplicacy-web ?
February 10, 20242 yr The Version Parameter works only with mini. https://hub.docker.com/r/saspus/duplicacy-web -> Environment variables Clarify for mini on the Docker Site and here https://forum.duplicacy.com/t/how-to-use-recent-duplicacy-web-release-in-a-docker-container/8443/
February 12, 20242 yr On 1/25/2024 at 5:30 PM, T_Matz said: I tried to give the docker a fixed IP and that didnt help either. I can see from the docker page the docker has an IP of 0.0.0.0 and even with the path added there is nothing in the docker path not sure what to do Not sure if I still can help you but here is my config. Make sure you have the path for the DB right: If the container crashes over and over again, you should check the logs for the reason. It could also help, to remove the container, remove the "traccar" folder from your "/mnt/user/appdata" and reinstall it while providing the path as mentioned I hope you get or got it running
February 14, 20242 yr On 2/7/2024 at 11:16 PM, drparton21 said: I was able to get past this by making my repository: tessypowder/backblaze-personal-wine:v1.5 However, I'm running into issues with read/write on the D drive. Thanks, this solved my black screen issue. but does this mean we are stuck on an older version of Backblaze?
February 16, 20242 yr On 2/10/2024 at 9:10 PM, Revan335 said: The Version Parameter works only with mini. https://hub.docker.com/r/saspus/duplicacy-web -> Environment variables Clarify for mini on the Docker Site and here https://forum.duplicacy.com/t/how-to-use-recent-duplicacy-web-release-in-a-docker-container/8443/ Okay just so im sure. I wont get the latest version of duplicacy if i do not add the "mini" parameter?
February 16, 20242 yr 38 minutes ago, DanielPT said: Okay just so im sure. I wont get the latest version of duplicacy if i do not add the "mini" parameter? Yes, when he is changed/published under here: https://duplicacy.com/latest_web_version
February 16, 20242 yr Im so confused about this Si right now you dont update the repo with the lastes version? Only if we have the mini parametre? Sorry that i dont understand this
February 16, 20242 yr 1 hour ago, DanielPT said: Im so confused about this Si right now you dont update the repo with the lastes version? Only if we have the mini parametre? Sorry that i dont understand this Discussion about this in the Forum: https://forum.duplicacy.com/t/how-to-use-recent-duplicacy-web-release-in-a-docker-container/8443/4
February 17, 20242 yr I have a question about the unifi-poller container. What are its dependencies? Is it an all-in-one application, or do i need separate running instances of InfluxDB or Prometheus and Grafana? Edited February 17, 20242 yr by Telcar
February 18, 20242 yr On 2/14/2024 at 2:26 PM, EvilSpice said: Thanks, this solved my black screen issue. but does this mean we are stuck on an older version of Backblaze? I tried a separate instance with the ubuntu22 tag, and it work well except for a folder permission error on startup
February 18, 20242 yr On 12/7/2023 at 7:23 PM, Astror said: Did you manage to fix this? I am trying exactly the same thing and I got to the point that overleaf is up and running locally, but when I try to create the admin account I cannot set a password, I get the coockie error. And I cannot access through the external IP adress (I think it is correctly pointing to the server, but I am not so sure of how to configure it in cloudflare). hey, sorry, I have not dealt with this for a while now. So, no I have not fixed it yet. Any enlightenment in the meantime ? Cheers
February 23, 20242 yr I'm not really sure if this is the right place, but the last update to Prometheus wiped out all my data history. Come to find out, looking at the container config and inside the container, it's storing all the data files in the root of the container, not in /data. Per the container settings in unraid, they are supposed to be stored in /prometheus/data. But they are stored in /prometheus. What this means is that today/yesterday's docker update wiped out all my data for the last couple weeks. I didn't notice it until today when debugging, wondering where all my grafana history disappeared to. Unraid has the paths setup, but the container/image isn't listening for some reason. Is there any way I can fix this? To tell Prom to store the data in the actual /prometheus/data folder? Edited February 23, 20242 yr by yoleska
February 23, 20242 yr Well, crud - looking at the Status > Command-Line Flags, I see this: --storage.tsdb.path /prometheus That should be /prometheus/data. I'm not sure how the best way to change this.
February 23, 20242 yr On 7/4/2022 at 10:31 PM, Slarti123 said: Thanks, everyone: Solved. For the record (and others): 1) Traccar: The template createa a folder called "traccar.xml". You have to delete that and upload the linked XML file, instead (and of course, do not autostart the docker, before). For some reason, that created a container that was never ever able to start again, even though I manually copied as described. Had to remove the container, delete the image, manually delete all data in "appdata" and then set everything up from scratch as desribed above. 2) TVH: to give you the full picture: still not sure about the initial reasons. Still, similar solution: completely delete container, image and "appdata". New, clean setup. Works now... Thanks a lot! Hey guys having this issue trying to get the container started have used the documentation and template to get the xml with MySQL db backend also using ChatGPT for some rough Gutenberg and having no luck as I keep getting the below. text error warn system array login at java.base/jdk.internal.util.xml.impl.Parser.ent(Parser.java:1994) at java.base/jdk.internal.util.xml.impl.Parser.step(Parser.java:471) at java.base/jdk.internal.util.xml.impl.ParserSAX.parse(ParserSAX.java:477) at java.base/jdk.internal.util.xml.impl.ParserSAX.parse(ParserSAX.java:411) at java.base/jdk.internal.util.xml.impl.ParserSAX.parse(ParserSAX.java:374) at java.base/jdk.internal.util.xml.impl.SAXParserImpl.parse(SAXParserImpl.java:97) at java.base/jdk.internal.util.xml.PropertiesDefaultHandler.load(PropertiesDefaultHandler.java:83) ... 19 more 2024-02-23 22:53:04 ERROR: Main method error - - SAXParseException (... < Config:46 < <gener:-1 < *:-1 < ... < Main:116 < ...) Exception in thread "main" java.lang.RuntimeException: com.google.inject.CreationException: Unable to create injector, see the following errors: 1) [Guice/ErrorInjectingConstructor]: RuntimeException: Configuration file is not a valid XML document at Config.<init>(Config.java:42) at MainModule.configure(MainModule.java:116) while locating Config Learn more: https://github.com/google/guice/wiki/ERROR_INJECTING_CONSTRUCTOR 1 error ====================== Full classname legend: ====================== Config: "org.traccar.config.Config" MainModule: "org.traccar.MainModule" ======================== End of classname legend: ======================== at org.traccar.Main.run(Main.java:146) at org.traccar.Main.main(Main.java:110) Caused by: com.google.inject.CreationException: Unable to create injector, see the following errors: 1) [Guice/ErrorInjectingConstructor]: RuntimeException: Configuration file is not a valid XML document at Config.<init>(Config.java:42) at MainModule.configure(MainModule.java:116) while locating Config Learn more: https://github.com/google/guice/wiki/ERROR_INJECTING_CONSTRUCTOR 1 error ====================== Full classname legend: ====================== Config: "org.traccar.config.Config" MainModule: "org.traccar.MainModule" ======================== End of classname legend: ======================== at com.google.inject.internal.Errors.throwCreationExceptionIfErrorsExist(Errors.java:589) at com.google.inject.internal.InternalInjectorCreator.injectDynamically(InternalInjectorCreator.java:190) at com.google.inject.internal.InternalInjectorCreator.build(InternalInjectorCreator.java:113) at com.google.inject.Guice.createInjector(Guice.java:87) at com.google.inject.Guice.createInjector(Guice.java:69) at com.google.inject.Guice.createInjector(Guice.java:59) at org.traccar.Main.run(Main.java:116) ... 1 more Caused by: java.lang.RuntimeException: Configuration file is not a valid XML document at org.traccar.config.Config.<init>(Config.java:64) at org.traccar.config.Config$$FastClassByGuice$$9a3fc4.GUICE$TRAMPOLINE(<generated>) at org.traccar.config.Config$$FastClassByGuice$$9a3fc4.apply(<generated>) at com.google.inject.internal.DefaultConstructionProxyFactory$FastClassProxy.newInstance(DefaultConstructionProxyFactory.java:82) at com.google.inject.internal.ConstructorInjector.provision(ConstructorInjector.java:114) at com.google.inject.internal.ConstructorInjector.construct(ConstructorInjector.java:91) at com.google.inject.internal.ConstructorBindingImpl$Factory.get(ConstructorBindingImpl.java:300) at com.google.inject.internal.ProviderToInternalFactoryAdapter.get(ProviderToInternalFactoryAdapter.java:40) at com.google.inject.internal.SingletonScope$1.get(SingletonScope.java:169) at com.google.inject.internal.InternalFactoryToProviderAdapter.get(InternalFactoryToProviderAdapter.java:45) at com.google.inject.internal.InternalInjectorCreator.loadEagerSingletons(InternalInjectorCreator.java:213) at com.google.inject.internal.InternalInjectorCreator.injectDynamically(InternalInjectorCreator.java:186) ... 6 more Caused by: java.util.InvalidPropertiesFormatException: jdk.internal.org.xml.sax.SAXParseException; at java.base/jdk.internal.util.xml.PropertiesDefaultHandler.load(PropertiesDefaultHandler.java:85) at java.base/java.util.Properties.loadFromXML(Properties.java:986) at org.traccar.config.Config.<init>(Config.java:46) ... 17 more Caused by: jdk.internal.org.xml.sax.SAXParseException; at java.base/jdk.internal.util.xml.impl.ParserSAX.panic(ParserSAX.java:652) at java.base/jdk.internal.util.xml.impl.Parser.ent(Parser.java:1994) at java.base/jdk.internal.util.xml.impl.Parser.step(Parser.java:471) at java.base/jdk.internal.util.xml.impl.ParserSAX.parse(ParserSAX.java:477) at java.base/jdk.internal.util.xml.impl.ParserSAX.parse(ParserSAX.java:411) at java.base/jdk.internal.util.xml.impl.ParserSAX.parse(ParserSAX.java:374) at java.base/jdk.internal.util.xml.impl.SAXParserImpl.parse(SAXParserImpl.java:97) at java.base/jdk.internal.util.xml.PropertiesDefaultHandler.load(PropertiesDefaultHandler.java:83) ... 19 more
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.