[Support] selfhosters.net's Template Repository


Recommended Posts

On 9/11/2021 at 10:31 PM, outrigger999 said:

Hello, did anyone have an answer for this one? I too want to figure out how to present a path through draw.io so I can save my diagrams onto the server. I've tried to add a path but that doesn't seem to show up within draw.io. Anyone have a method for doing this?

No one replied to this problem and I gave up.

Link to comment

i am running zwave2mqtt and every so often the serial port for zwave will drop out and i will lose the ability to control my devices. i just have to go in and reset it. is there something to prevent this from happening. it is just a pain to have to reset this a couple of times a week. this has become a real hassle when using home assistant

Link to comment
On 8/10/2021 at 10:43 PM, tzahi12345 said:

 

If you're using %(release_date), this isn't gonna work as YT doesn't have that info apparently. I did just try %(upload_date) and it worked without issue, perhaps you should put this in the default file output setting:

 

%(upload_date)s - %(title)s

 

Let me know if this helps! Feel free to open an issue or discussion on the GitHub page too if you experience any other problems.

Sorry for the delay, just got myself a newborn baby. still learning to keep up, lol. 

 

yes this worked perfectly! I still learning a ton on this too. but thank you!

Link to comment

I'm using the cloudflare ddns docker. It was working fine, but i noticed today it was not updating my ip with cloudflare any longer. I get the following error in the logs:

 

ERROR: Failed to update CloudFlare DNS record <redacted zone> from <redacted ip> to ;; connection timed out; no servers could be reached

 

I've tried restarting the docker. All other dockers or anything else on my unraid server is not having any kind of connectivity issue.

Link to comment

Hi.  The speedtest tracker container running v1.12.0 currently has a broken feature. 

 

The graphs don't change to anything other than the 7 day default view.  I recently discovered that my 1Gbps line is performing fine for uploads (980Mbps) but downloads are ~90 to ~200Mbps.  I wanted to look up my history to see when this happened so I can call my ISP.

 

The historical data is there as I can see a median result over the lifetime of me running the container.  The graphs just don't adjust.

 

This is a known bug, and there is a fix in 1.12.2, but the container itself is still running 1.12.0.

I couldn't tell from the github ticket whether or not it's actually released to anything other than the dev branch though.

Link to comment
On 9/27/2021 at 10:57 AM, Jason Harris said:

Hi.  The speedtest tracker container running v1.12.0 currently has a broken feature. 

 

The graphs don't change to anything other than the 7 day default view.  I recently discovered that my 1Gbps line is performing fine for uploads (980Mbps) but downloads are ~90 to ~200Mbps.  I wanted to look up my history to see when this happened so I can call my ISP.

 

The historical data is there as I can see a median result over the lifetime of me running the container.  The graphs just don't adjust.

 

This is a known bug, and there is a fix in 1.12.2, but the container itself is still running 1.12.0.

I couldn't tell from the github ticket whether or not it's actually released to anything other than the dev branch though.

Update:

This will, I assume, be fixed soon.  But since I needed this sooner for my discussions with my ISP I made the following change to the "Repository" for the container in Unraid:

  • Modified
    • from henrywhitaker3/speedtest-tracker
    • to henrywhitaker3/speedtest-tracker:dev (appended :dev to the end)

Saved, restarted the container.  It grabbed the dev branch, and confirmed, the graphs work again.  Once the main branch is updated with the graph fix, I'll switch the repository back.  As expected, all historical data is still there.

 

*non-relevant information for the docker issue, but a use case for this docker*

As it turns out, I've been losing ~7% of my download bandwidth since August 26th about every 3 days.  Tech support is sending someone out to check my line and the main fiber panel at the end of my street Tuesday, October 5th.  And a large part of that was due to this information.  I didn't notice it before because it was slowly and slowly dropping.

 

45 day graph:

image.thumb.png.7df698311081c99226e96afc4bdd6d75.png

 

I'm supposed to be getting ~950Mb/s down, I'm NOW getting ~36Mb/s down!  Yikes!  We both are wondering if I'll be at dial-up speeds by Tuesday...  Time to bust out an old US Robotics 56.6...

Edited by Jason Harris
clarity
Link to comment
On 4/17/2021 at 3:38 AM, AwesomeAustn said:

 

I had the same issue. I just downloaded it from https://prometheus.io/download/ and copied the yaml file to the volume I mounted.

 

I had Prometheus running previously, using this guide : https://unraid.net/blog/prometheus.

 

I messed up something with my cache drive, and now I'm getting permission denied for the Prometheus appdata folder and cannot paste the .yml file into /appdata/prometheus/etc like I had done previously.

 

Does anyone know how to restore permissions? I've tried uninstalling and reinstalling the Prometheus Docker container and Prometheus Node Exporter with no luck.

Link to comment

Using Monica, the web server doesn't seem to bind appropriately:

 

Monica v3.2.0 is set up, enjoy.
Database ready.AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message
(98)Address already in use: AH00072: make_sock: could not bind to address [::]:80
(98)Address already in use: AH00072: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down

 

Nothing written to the "logs" folder in the default volume. In unraid UI, port 80 is mapped to an unused high port. I couldn't find any environment variables or volumeised config for changing port 80 to something else.

 

Any ideas? Probably something silly!

Edited by andrew207
Link to comment

Hi All

 

I just experienced my Unraid system to be really unresponsive and some of my dockers stopped running.

image.png.d5eaa57e93181db3601a092fd77a0d54.png

 

I found the reason - it was this docker: Seedsync

image.thumb.png.bc38575f7b54af18e570e2c8c0194921.png

 

Looks like this docker was created under the Selfhostersnets-template so hoping someone can help me?

I did have the parameter set: --cpus=2 --memory=3G --log-opt max-size=50m --log-opt max-file=1 --restart unless-stopped --user 99:100

 

Anyone who can help me get this working?

Link to comment
2 hours ago, TheProfosist said:

looking for some help with deemix docker. I cant delete or modify the files that it downloads via a Win10 computer over SMB

complete details are over in this thread

 

 

resolved I needed to set umask for the docker. by default it is set to 0022 but unraid which is just root for delete/modify. 0002 worked for me some say to just use 0000 but I read that is more insecure

an example of the dialog is in a previous resilio sync post

 

A post explaining umask options
https://www.cyberciti.biz/tips/understanding-linux-unix-umask-value-usage.html

 

Edited by TheProfosist
Link to comment

Just a quick question on the draw.io.  I'm trying to set it up, but everytime I hit install  (new app store, on 6.9.2).
I show Draw.io, Network type Bridge, Shell command is Shell.  Webui port is 3000, basically leaving it all as is.

It's not working... I hit apply/done and it goes right back to the left side flyout install again asking me to install.  I'm 100% sure it's me.  Do I need to give it a new IP address, or it's own internal IP address?  Pardon my stupidity if that's the case... but I'm guessing I would give it a custom/br0 address and let it get assigned via dhcp.  But then I only have apply and reset available... not done...  I feel like I'm missing something big here.  lol. 

Link to comment
On 10/10/2021 at 7:43 PM, casperse said:

Hi All

 

I just experienced my Unraid system to be really unresponsive and some of my dockers stopped running.

image.png.d5eaa57e93181db3601a092fd77a0d54.png

 

I found the reason - it was this docker: Seedsync

image.thumb.png.bc38575f7b54af18e570e2c8c0194921.png

 

Looks like this docker was created under the Selfhostersnets-template so hoping someone can help me?

I did have the parameter set: --cpus=2 --memory=3G --log-opt max-size=50m --log-opt max-file=1 --restart unless-stopped --user 99:100

 

Anyone who can help me get this working?

Can anyone share whats wrong with this docker template?

I have installed it 3 times and after some time it just fills up the entire docker file and crashes everything

There isnt any special fancy setup its pretty basic? maybee some logfile that isnt configured correctly?

 

I did set all the special parameters and it still crashed

Link to comment

Question about the Mango package: Does this package not contain the default downloader that Mango is supposed to have?

 

I can for the life of me not find out how to get any downloader to work, without downloading, say the MangaDex, from the original creators plugin repo, which he says not to use and which hasn't been updated in quite a while.

Link to comment

Recently installed speedtest-tracker and tests run successfully, but have errors daily.  Below is recent log entries:

 

{"type":"log","timestamp":"2021-10-17T17:00:07Z","message":"Failed to resolve host name. Cancelling test suite.","level":"error"}

{"type":"log","timestamp":"2021-10-17T19:00:06Z","message":"Error: [11] Cannot read from socket: Resource temporarily unavailable","level":"error"}

{"type":"log","timestamp":"2021-10-18T00:00:07Z","message":"Failed to resolve host name. Cancelling test suite.","level":"error"}

{"type":"log","timestamp":"2021-10-18T15:00:03Z","message":"Error: [104] Cannot read from socket: Connection reset by peer","level":"error"}

{"type":"log","timestamp":"2021-10-18T16:00:08Z","message":"Error: [110] Cannot open socket: Timeout occurred in connect.","level":"error"}

{"type":"log","timestamp":"2021-10-18T17:00:02Z","message":"Error: [104] Cannot read from socket: Connection reset by peer","level":"error"}

{"type":"log","timestamp":"2021-10-18T23:00:05Z","message":"Error: [110] Cannot open socket: Timeout occurred in connect.","level":"error"}

{"type":"log","timestamp":"2021-10-19T01:00:05Z","message":"Error: [0] Cannot read from socket: ","level":"error"}

{"type":"log","timestamp":"2021-10-19T02:00:07Z","message":"Error: [110] Cannot open socket: Timeout occurred in connect.","level":"error"}

{"type":"log","timestamp":"2021-10-19T22:00:05Z","message":"Error: [104] Cannot read from socket: Connection reset by peer","level":"error"}

{"type":"log","timestamp":"2021-10-20T20:00:07Z","message":"Error: [110] Cannot open socket: Timeout occurred in connect.","level":"error"}

{"type":"log","timestamp":"2021-10-20T21:00:03Z","message":"Error: [0] Cannot read from socket: ","level":"error"}

{"type":"log","timestamp":"2021-10-21T14:00:03Z","message":"Error: [104] Cannot read from socket: Connection reset by peer","level":"error"}

{"type":"log","timestamp":"2021-10-21T15:00:05Z","message":"Error: [110] Cannot open socket: Timeout occurred in connect.","level":"error"}

{"type":"log","timestamp":"2021-10-21T20:00:07Z","message":"Error: [11] Cannot read from socket: Resource temporarily unavailable","level":"error"}

{"type":"log","timestamp":"2021-10-21T21:00:06Z","message":"Error: [0] Cannot read from socket: ","level":"error"}

{"type":"log","timestamp":"2021-10-21T22:00:03Z","message":"Error: [104] Cannot read from socket: Connection reset by peer","level":"error"}

{"type":"log","timestamp":"2021-10-22T01:00:06Z","message":"Error: [11] Cannot read: Resource temporarily unavailable","level":"error"}

 

Not really sure what is causing the issue so would appreciate any insight others may have.

 

Here is my config:

 

image.thumb.png.679f525ce8629d470f6a2fb3220e31a5.png

Link to comment

I am looking for some help in setting up AirConnect in unRAID. The docker seems to run fine but I am not seeing my two ChromeCast devices listed, just the native AirPlay app on my TV shows up on my clients.

Where is the best place to get some help? Here? Or on the GitHub page? I kind of hate to post something on the GitHub as I am sure it is "pilot error" and nothing wrong with the docker....

Can anyone share how they have configured the docker in unRAID? Most posts I see see no changes are needed and it should run out of the box?

I am betting it is my router that is causing the issue? I am on an ASUS RT-AC86U running Merlin. I do have "IGMP Snooping" snooping enabled. What port forwarding is needed and how do folks do this?

Any pointers would be appreciated. Thanks!

Link to comment
  • 4 weeks later...

Ninja no longer working.  The system did an update last night on the ninja invoice container and it will no longer start.  I verified that that database it still up and running.  The only show this 

standard_init_linux.go:211: exec user process caused "exec format error"

each time you try and start the container.

Link to comment
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.