Kjetil Posted February 20, 2020 Author Share Posted February 20, 2020 I got this error message on one of the discs that was unassigned (which was the disc number 22 in the server). Quote Link to comment
Kjetil Posted February 20, 2020 Author Share Posted February 20, 2020 Shall I just start the server again and let it rebuild (with this error on disc 22) ? Quote Link to comment
trurl Posted February 20, 2020 Share Posted February 20, 2020 CRC Errors are connection issues not drive issues. The counter won't reset, but you can acknowledge the SMART warning by clicking on it on the Dashboard. You will get another warning if the count increases. Continue with rebuild Quote Link to comment
Kjetil Posted February 23, 2020 Author Share Posted February 23, 2020 Rebuilds done. Its seems to be working fine. I just have one problem, which I had for quite a while - when I copy from a Mac (mac os) to the server, the speed is not as high as I think it should be (maybe 30-50 mb/s). Also, when the copy says "5 sec left" it stops for maybe 20-30 seconds before finishing the copy. I am using SMB. Are there any settings that I should look into to help with this issue ? federalreserve-diagnostics-20200222-1114.zip Quote Link to comment
JorgeB Posted February 23, 2020 Share Posted February 23, 2020 30/50MB/s is about right for default writing mode, it should be faster with turbo write, at the expense of all drives spinning up for writes. Quote Link to comment
Kjetil Posted February 23, 2020 Author Share Posted February 23, 2020 Ok, thanks for the feedback. I was more concerned with the 30 sec wait even if it said "5 sec left". Is this normal with the unraid ? Quote Link to comment
JorgeB Posted February 23, 2020 Share Posted February 23, 2020 That might be more of an OSX issue, I don't' see that with Windows. Quote Link to comment
itimpi Posted February 23, 2020 Share Posted February 23, 2020 2 hours ago, Kjetil said: Ok, thanks for the feedback. I was more concerned with the 30 sec wait even if it said "5 sec left". Is this normal with the unraid ? I suspect that this may be related to the time in is taking Unraid to flush all the data from RAM to the disks (but I could be wrong ). Quote Link to comment
JorgeB Posted February 23, 2020 Share Posted February 23, 2020 6 minutes ago, itimpi said: I suspect that this may be related to the time in is taking Unraid to flush all the data from RAM to the disks (but I could be wrong ). Could be, maybe OSX uses sync writes with SMB by default. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.