Burizado Posted May 13, 2020 Share Posted May 13, 2020 Just had my MB Temp go up this morning. Will be letting William from ASRock Support know. Quote Link to comment
Burizado Posted May 13, 2020 Share Posted May 13, 2020 This time it might be a different sensor. @Hoopster which sensor are you seeing in System Temp plugin? It looks like it is still correlated to AUXTIN3 whatever that is. I believe we saw this last time, as I was going back through the thread to remember what we were seeing previously. Quote Link to comment
Hoopster Posted May 13, 2020 Author Share Posted May 13, 2020 51 minutes ago, Burizado said: which sensor are you seeing in System Temp plugin? Same for me. The high temp reading for MB temp is the same temp being reported for AUXTIN3. 1 Quote Link to comment
kaiguy Posted May 13, 2020 Share Posted May 13, 2020 2 weeks in for me on the L2.21A BIOS. No high temp warning yet (though I would bet money given everyone else getting the warning within the last few days I'm due for one). I'll be sure to comment here and let William know if/when it happens. Server has been fairly idle and its been pretty cool here in gneral lately, but that's the norm anyway so I doubt that's a factor. Quote Link to comment
_0m0t3ur Posted May 13, 2020 Share Posted May 13, 2020 @Hoopster have you looked at BIOS settings in relation to high temp warnings? Quote Link to comment
Hoopster Posted May 14, 2020 Author Share Posted May 14, 2020 20 hours ago, DoItMyselfToo said: @Hoopster have you looked at BIOS settings in relation to high temp warnings? There was nothing I could see in the BIOS that appears related, but, BIOS settings can often be very cryptic. Quote Link to comment
_0m0t3ur Posted May 14, 2020 Share Posted May 14, 2020 4 hours ago, Hoopster said: There was nothing I could see in the BIOS that appears related, but, BIOS settings can often be very cryptic. Very true. I'm very young with running this board, so just asking the questions. When I swapped this board into my server, I went through all the BIOS settings, Googling as needed. I did find a few settings that were causing issues with other unRAID users (not this board specifically), but that's what prompted me to ask. Quote Link to comment
jsr Posted May 16, 2020 Share Posted May 16, 2020 On 3/5/2020 at 9:35 AM, Hoopster said: The Dynamix temp plugin has never shown me the fan speeds, it just shows 'not used'. I get just CPU and MB temp from that. In my prior (non-IPMI) system I used the Dynamix Autofan plugin to control and display the fan speeds. However, with your new motherboard with IPMI, IPMI controls the PWM fans and you need to use the IPMI Tools plugin. I use it to display CPU fan speed and the speed of the PWM fans on my hard drive hotswap cage so I can control them based on HDD temps. In the screen snip below, the temps are coming from the Dynamix Temp plugin and the fan speeds from IPMI Tools. Actually, IPMI Tools will let you designate up to four temps/speeds in the footer so you can get CPU and MB temps as well as two fans just from IPMI Tools. I want the five I mentioned, so, I use a combination of the IPMI Tool and Dynamix Temps. If your CPU temp is really 31C under a 92% load across all cores, I need to get whatever CPU fan you are using 😁! @Hoopster When I use both the Dynamix plugin along with the IPMI Tools to display temperatures and fan speeds in the footer, the two sets of numbers keep flipping for me. In other words, Dynamix sensor information first, then IPMI Tools sensor information. A couple seconds later... IPMI Tools sensor information first, then Dynamix. Does that happen for you? My assumption is it has to do with the sensor refresh, but the flipping of the two sets of numbers is very distracting. Quote Link to comment
Hoopster Posted May 17, 2020 Author Share Posted May 17, 2020 21 hours ago, jsr said: When I use both the Dynamix plugin along with the IPMI Tools to display temperatures and fan speeds in the footer, the two sets of numbers keep flipping for me. Does that happen for you? Yes, it does. I have just gotten used to it but it is annoying. 1 Quote Link to comment
Harro Posted May 22, 2020 Share Posted May 22, 2020 Now that I have this board and cpu and wonder how many 1080 transcode streams can it handle. With my server in sig, I can do two transcode streams. I don't have a plex pass so the igpu is useless unless I go to jellyfin docker instead of plex. Also with 17 drives, 15 data and 2 parity, will my 750 psu be enough. I don;t have any VM's as of yet and only 6 dockers running. Quote Link to comment
Hoopster Posted May 22, 2020 Author Share Posted May 22, 2020 21 minutes ago, Harro said: Now that I have this board and cpu and wonder how many 1080 transcode streams can it handle With CPU (software) transcoding, the CPU will handle 7-8 simultaneous 1080P streams. Software transcoding is based on passmark score and the E-2288G has a passmark score of 17,316. Plex recommends 2000 passmarks per 1080P stream and unRAID needs about 2000 for system overhead. You could comfortably get 7 simultaneous 1080P Plex streams and may be able to push it to 8 if nothing else is happening on the server. 1 Quote Link to comment
Harro Posted May 22, 2020 Share Posted May 22, 2020 29 minutes ago, Hoopster said: I think it should still be enough. In most cases, the CPU is consuming less than 100W. Noctua claims it can consume up to 230W (that seems high) at Turbo speeds. In this review of the E-2288G, STH states the maximum observed wattage consumed by the processor is 151W and that was in performance (Turbo) mode. At this moment, my UPS claims the server is using 144W and the CPU has 10 of the 16 cores maxed out (but at non-Turbo speed). I am using a 600W SFX power supply. Granted, you have a lot more drives than I do, but, HDDs don't require a ton of wattage. 12 minutes ago, Hoopster said: You do not necessarily have to go that big. Noctua rates their coolers based on how much headroom they have for a processor at overclocked/turbo speeds. They don't list the Xeons, but the E-2288G is basically an i9-9900K with ECC support. Here are the ratings for various desktop chips for the NH-U14S CPU cooler. It is much smaller than the NH-D15 but is still rated to provide the best overclocking headroom for the i9-9900K. 2 minutes ago, Hoopster said: With CPU (software) transcoding, the CPU will handle 7-8 simultaneous 1080P streams. Software transcoding is based on passmark score and the E-2288G has a passmark score of 17,316. Plex recommends 2000 passmarks per 1080P stream and unRAID needs about 2000 for system overhead. You could comfortably get 7 simultaneous 1080P Plex streams and may be able to push it to 8 if nothing else is happening on the server. Thanks Hoopster. I brought the other quotes from Good Deals thread over here to try and keep that thread somewhat on topic. The reason I would get the bigger Noctua cooler is for the reason my server is in the attic. My temps during a parity check have never gone over 42c for my drives and with a larger cooler for cpu I would hope to not add any more heat inside. I live in TX and things do get HOT here but my attic is very well insulated keeping the outside temps from invading the attic space. Even though I have recorded temps in the mid-high 90's F up there. 1 Quote Link to comment
Hoopster Posted May 22, 2020 Author Share Posted May 22, 2020 3 minutes ago, Harro said: The reason I would get the bigger Noctua cooler is for the reason my server is in the attic It's never a bad idea to go with the biggest cooler you can fit in the case and on the motherboard. I wish I could get a bigger one in the case. And I thought my office with several other PCs (space heaters) and a southern exposure to the sun was hot! Quote Link to comment
Harro Posted May 22, 2020 Share Posted May 22, 2020 The reason I have finally decided to upgrade, is from the stupid covid-19 has got all my nieces, nephews, sisters and other friends now using my plex server almost all the time. This leaves me once work is done with interruptions when I want to watch something. My i5 just can not handle it all. I can watch my cores hitting 100% until the stream buffer is done. With this upgrade I should have a lot more head room. Quote Link to comment
Hoopster Posted May 22, 2020 Author Share Posted May 22, 2020 16 minutes ago, Harro said: The reason I have finally decided to upgrade, is from the stupid covid-19 has got all my nieces, nephews, sisters and other friends now using my plex server almost all the time. Tell everyone using your Plex server to pony up $10 for unlimited access to your Plex libraries and buy a Plex Pass. Then you can use hardware (iGPU) transcoding and be rocking a dozen streams or so with little load on the CPU. 😀 1 Quote Link to comment
_0m0t3ur Posted May 22, 2020 Share Posted May 22, 2020 I'm loving this board/ram. Excellent results. I went with an E2278G from Provantage. No complaints. For cooler, I chose the Arctic Freezer 33 and added a second 120mm fan. It just clears the RAM and just clears my 4U Supermicro chassis lid. Provides a good amount of cooling. Very quiet. With having a bunch of users, I would recommend getting a Plex pass so you can take advantage of HW transcoding with igpu (QuickSync); it's amazing. 1 Quote Link to comment
Harro Posted May 22, 2020 Share Posted May 22, 2020 5 minutes ago, Hoopster said: Tell everyone using your Plex server to pony up $10 for unlimited access to your Plex libraries and buy a Plex Pass. Then you can use hardware (iGPU) transcoding and be rocking a dozen streams or so with little load on the CPU. 😀 LOL I should have them pony up 100.00 dollars for the server upgrade. 5 minutes ago, DoItMyselfToo said: I'm loving this board/ram. Excellent results. I went with an E2278G from Provantage. No complaints. For cooler, I chose the Arctic Freezer 33 and added a second 120mm fan. It just clears the RAM and just clears my 4U Supermicro chassis lid. Provides a good amount of cooling. Very quiet. With having a bunch of users, I would recommend getting a Plex pass so you can take advantage of HW transcoding with igpu (QuickSync); it's amazing. Thanks for the fan info, will take a look at the Arctic Freezer coolers. I don't use plex. Kodi through my network. Picture taken behind my seating on a 110" screen. Picture quality, 4k 2 Quote Link to comment
parisv Posted May 23, 2020 Share Posted May 23, 2020 My plex gpu decoding seems to have stopped working.... root@tower:/# modprobe i915 root@tower:/# ls -la /dev/dri /bin/ls: cannot access '/dev/dri': No such file or directory Here are my bios settings: Quote Link to comment
Hoopster Posted May 23, 2020 Author Share Posted May 23, 2020 13 hours ago, parisv said: My plex gpu decoding seems to have stopped working... Hmm, I am seeing no such issues. Don't know what to tell you to check as, in general, things are working for me. Has anything on your server changed recently? BIOS settings look correct and are the same as mine. /dev/dri and the appropriate contents exist on my server. Plex server version is 1.19.3.2793. I forced a transcode and all is well (Plex reports hw decode and encode). Quote Link to comment
parisv Posted May 24, 2020 Share Posted May 24, 2020 (edited) No nothings change on my server. Regardless of plex I don't understand why modeprobe is not picking up the gpu? root@tower:~# sudo lshw -C video | grep product: product: HD Graphics P630 product: ASPEED Graphics Family root@tower:~# lspci | grep VGA 05:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 41) Edited May 24, 2020 by parisv Quote Link to comment
norbo80 Posted May 24, 2020 Share Posted May 24, 2020 Hi, I just bough I9-9900 for my homeserver. What options do I have regarding Motherboard? I would like to use IPMI + iGPU Quote Link to comment
_0m0t3ur Posted May 24, 2020 Share Posted May 24, 2020 6 hours ago, norbo80 said: Hi, I just bough I9-9900 for my homeserver. What options do I have regarding Motherboard? I would like to use IPMI + iGPU Curious if there is a reason you opted for the i9-9900 vs going E22xxG Xeon? Quote Link to comment
norbo80 Posted May 24, 2020 Share Posted May 24, 2020 i found an offer for this CPU for about 250€ Quote Link to comment
parisv Posted May 26, 2020 Share Posted May 26, 2020 (edited) On 5/24/2020 at 10:36 AM, parisv said: No nothings change on my server. Regardless of plex I don't understand why modeprobe is not picking up the gpu? root@tower:~# sudo lshw -C video | grep product: product: HD Graphics P630 product: ASPEED Graphics Family root@tower:~# lspci | grep VGA 05:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 41) Found the issue. I set my windows VM to use the graphics card and had it set to auto start. Once this is started /dev/dri on unraid disappears. Edited May 26, 2020 by parisv Quote Link to comment
_0m0t3ur Posted May 26, 2020 Share Posted May 26, 2020 3 hours ago, parisv said: Found the issue. I set my windows VM to use the graphics card and had it set to auto start. Once this is started /dev/dri on unraid disappears. That makes sense. I haven't looked into it, but wondering whether you could add a video card for the VM and still use onboard for video transcodes? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.