dchlds Posted February 1, 2020 Share Posted February 1, 2020 Hello I'm new I recently got unraid on my server no problems then I had to move my server so I had to shut it down I stopped spinning the hard drives and then I shut it down when I went back to turn it back on I can't assign the hard drive anymore not sure what to do not that familiar with this somebody could help would appreciate it Quote Link to comment
Squid Posted February 1, 2020 Share Posted February 1, 2020 Sounds more like a power supply issue to the hard drives. Cabling unplugged? Quote Link to comment
dchlds Posted February 1, 2020 Author Share Posted February 1, 2020 Everything is plugged in it shows all the drives and just finished a preclean disk no problems were found Quote Link to comment
Squid Posted February 1, 2020 Share Posted February 1, 2020 You've switched controllers / firmware of the HBA they're plugged into. They are all being reported as a different serial number. Either switch it back, or do a tools - new config and reassign them appropriately. Quote Link to comment
dchlds Posted February 1, 2020 Author Share Posted February 1, 2020 thank you I've been working on that for quite some time now did anybody ever tell you were genius Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.