Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

smart report

Featured Replies

Hi!,

I need to upgrade my actual parity drive (3TB) to this new ST8000DM004 8TB drive.

I would appreciate if anyone can check this smart report and confirm to me the disk is ok.

It seems obvious since the report I think does not show any error, but the new disk did not finish 1 full preclear cycle. I am still waiting to get some feedback on the preclear plugin support forum, but if the disk is ok then I would proceed to upgrade my parity now.

Rgds

ST8000DM004-2CX188_WCT2AX56-20200208-1107.txt

Two statistics item have concern, but SMART show it is fine. There are hard to say use this disk or not.

 

For me, I don't preclear on new disk, because I usually rebuild under maintenance mode and I have dual parity & backup, if failure occur, I will simple re-add the old disk.

You could check does statistics error grow after rebuild.

 

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4               8  ---  Lifetime Power-On Resets
0x01  0x010  4              65  ---  Power-on Hours
0x01  0x018  6     15628834935  ---  Logical Sectors Written
0x01  0x020  6        11634636  ---  Number of Write Commands
0x01  0x028  6     19256553804  ---  Logical Sectors Read
0x01  0x030  6        18900817  ---  Number of Read Commands
0x01  0x038  6               -  ---  Date and Time TimeStamp
0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
0x03  0x008  4              65  ---  Spindle Motor Power-on Hours
0x03  0x010  4              62  ---  Head Flying Hours
0x03  0x018  4              57  ---  Head Load Events
0x03  0x020  4               0  ---  Number of Reallocated Logical Sectors
0x03  0x028  4               1  ---  Read Recovery Attempts
0x03  0x030  4               0  ---  Number of Mechanical Start Failures
0x03  0x038  4               0  ---  Number of Realloc. Candidate Logical Sectors
0x03  0x040  4               7  ---  Number of High Priority Unload Events
0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
0x04  0x008  4               2  ---  Number of Reported Uncorrectable Errors
0x04  0x010  4               0  ---  Resets Between Cmd Acceptance and Completion

  • Author

ok, thx for your help. I will re-run a preclear cycle to check again for those 2 parameters.

 

  • Author
Two statistics item have concern, but SMART show it is fine. There are hard to say use this disk or not.
 
For me, I don't preclear on new disk, because I usually rebuild under maintenance mode and I have dual parity & backup, if failure occur, I will simple re-add the old disk.
You could check does statistics error grow after rebuild.
 
Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4               8  ---  Lifetime Power-On Resets
0x01  0x010  4              65  ---  Power-on Hours
0x01  0x018  6     15628834935  ---  Logical Sectors Written
0x01  0x020  6        11634636  ---  Number of Write Commands
0x01  0x028  6     19256553804  ---  Logical Sectors Read
0x01  0x030  6        18900817  ---  Number of Read Commands
0x01  0x038  6               -  ---  Date and Time TimeStamp
0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
0x03  0x008  4              65  ---  Spindle Motor Power-on Hours
0x03  0x010  4              62  ---  Head Flying Hours
0x03  0x018  4              57  ---  Head Load Events
0x03  0x020  4               0  ---  Number of Reallocated Logical Sectors
0x03  0x028  4               1  ---  Read Recovery Attempts
0x03  0x030  4               0  ---  Number of Mechanical Start Failures
0x03  0x038  4               0  ---  Number of Realloc. Candidate Logical Sectors
0x03  0x040  4               7  ---  Number of High Priority Unload Events
0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
0x04  0x008  4               2  ---  Number of Reported Uncorrectable Errors
0x04  0x010  4               0  ---  Resets Between Cmd Acceptance and Completion
After a new preclear cycle it showed no errors. I must have moved the case while preclear and theft disk was affected. Will keep an eye on the statistics as nyway.
Thx!

Enviado desde mi HMA-L29 mediante Tapatalk

6 hours ago, luca2 said:

After a new preclear cycle it showed no errors. I must have moved the case while preclear and theft disk was affected. Will keep an eye on the statistics as nyway.
Thx!

Enviado desde mi HMA-L29 mediante Tapatalk
 

Agree, don't worry too much.

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.