aim60 Posted February 8, 2020 Share Posted February 8, 2020 I'm running 6.8.1 with a 3-drive raid1 cache pool. I've been getting Errors on Cache Pool messages, and many of the following in the logs: BTRFS error (device sdf1): error writing primary super block to device 1 kernel: sd 7:0:0:0: [sdf] tag#15 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00 kernel: sd 7:0:0:0: [sdf] tag#15 CDB: opcode=0x2a 2a 00 1d 9b af c0 00 00 58 00 The device still shows a green ball on the Main tab, but smartctl returns Short INQUIRY response, skip product id A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. I'm assuming that the drive needs replacement. My only use of cache is VM's and Dockers, and I have disabled both services, as well as temporarily disabling the mover job. I would like to remove the cache pool from the configuration until I can obtain a replacement. I assume that the procedure is to stop the array and unassign all of the cache drives, and start the array. Then when the new drive arrives, reassign the 2 good drives and the replacement, and start the array. Please confirm my procedure. I only have remote access to the server for the next few days. Thanks tower7-diagnostics-20200208-1324B.zip Quote Link to comment
JorgeB Posted February 9, 2020 Share Posted February 9, 2020 Cache1 dropped offline: Feb 7 10:24:38 Tower7 kernel: ata6: hard resetting link Feb 7 10:24:43 Tower7 kernel: ata6: link is slow to respond, please be patient (ready=0) Feb 7 10:24:48 Tower7 kernel: ata6: COMRESET failed (errno=-16) Feb 7 10:24:48 Tower7 kernel: ata6: hard resetting link Feb 7 10:24:53 Tower7 kernel: ata6: link is slow to respond, please be patient (ready=0) Feb 7 10:24:58 Tower7 kernel: ata6: COMRESET failed (errno=-16) Feb 7 10:24:58 Tower7 kernel: ata6: hard resetting link Feb 7 10:25:03 Tower7 kernel: ata6: link is slow to respond, please be patient (ready=0) Feb 7 10:25:33 Tower7 kernel: ata6: COMRESET failed (errno=-16) Feb 7 10:25:33 Tower7 kernel: ata6: limiting SATA link speed to 3.0 Gbps Feb 7 10:25:33 Tower7 kernel: ata6: hard resetting link Feb 7 10:25:38 Tower7 kernel: ata6: COMRESET failed (errno=-16) Feb 7 10:25:38 Tower7 kernel: ata6: reset failed, giving up Feb 7 10:25:38 Tower7 kernel: ata6.00: disabled Likely a cable/connection issue, see here for more info: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=700582 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.