Hi Unraid community,

New user of UNRAID I am very enthusiastic about the idea of staying on UNRAID. But I am a little unmotivated by the many crashes.

The server has run maximum 1 day without crash. Yesterday the WebGUI no longer worked, today the full server ...

Here you will find a screenshot of the page before restarting

 

My config :

Rysen 7 2700x

MB MSI B450 Gaming plus Max

RAM : 32GB

PS : 650W Enermax (Old age)

2 SSD cache

3 DD data

 

Docker : Duckdns, Openvpn-as

VM : Ubuntu server

 

Could you help me ?

 

Thank you very much and sorry for my bad English I'm French

Edited February 13, 20206 yr by Enkill

See if this helps:

https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=819173

 

Ok thank you for your reply

I already config "Power Supply Idle Control" to "typical current idle"

By cons I have two RAM sticks (2x16) and I activate the XMP option (3200Mhz)

Do I have to try without XMP mode?

It's Crucial Ballistix sport LT CL16 3200 MHz

Run the RAM without overclocking. 

 

 

ok i will test this and I will share the results

TY

I used to have lots of crashes with the early launch of the Ryzen 1700x but mostly due to the ram incompatibility, eventually I looked at a similar ram in the compatibility table of the motherboard and set the clocks and speeds accordingly.

 

I have the corsair LPX 3200 clocked at 3000 timings at 15-17-17-17-35 & been up for over a week since the last update, if the ram isnt listed you might want to do the same & get the best performance out of the CPU if needed.

 

As @johnnie.black said, you can run without overclocking for a while to see if there are any other underlying factors that might have lead to the kernel panic.

Yes I do that ... I am frustrated that I did not take INTEL as usual

I switched my server RAM (Crucial Ballistix sport LT CL16 3200 MHz 2x16GB) with my home laptop (Crucial Ballistix sport LT CL16 3000 MHz 4x8GB).

I conserved the OC profile for the new RAM (2993Mhz instead of 3200Mhz)

The system is stable actually, I will share the results in few days

Thank you for your help

Hi everybody,

I wanted to give you feedback after a few days of use with my new RAM

Everything is working properly the server is stable since the change

So if it helps someone, here is the hardware configuration that works for me.

MB : MSI B450 Gaming plus Max

CPU : Ryzen 2700x

RAM : Crucial Ballistix sport LT CL16 3000 MHz 4x8GB with OC Mode in BIOS (2993Mhz)

 

Have a good day !

 

Thanks for reporting back.