February 16, 20206 yr Based on the Raw_Read_Error_Rate is this dive destined for the recyciling bin? Quote smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.98-Unraid] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68EUZN0 Serial Number: WD-WMC4N2898941 LU WWN Device Id: 5 0014ee 0592a2c03 Firmware Version: 80.00A80 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Feb 16 08:58:29 2020 SAST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 113) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (38940) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 391) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 3987 3 Spin_Up_Time POS--K 194 173 021 - 5275 4 Start_Stop_Count -O--CK 087 087 000 - 13821 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 047 047 000 - 39382 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 307 192 Power-Off_Retract_Count -O--CK 200 200 000 - 203 193 Load_Cycle_Count -O--CK 183 183 000 - 51858 194 Temperature_Celsius -O---K 119 094 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 4393 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4393 [0] occurred at disk power-on lifetime: 39212 hours (1633 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 b2 8e 26 98 40 00 Error: UNC at LBA = 0xb28e2698 = 2995660440 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 04 b8 00 20 00 00 b2 8e 62 30 40 08 05:55:03.649 READ FPDMA QUEUED 60 00 88 00 18 00 00 b2 8e 61 a8 40 08 05:55:03.644 READ FPDMA QUEUED 60 02 e0 00 10 00 00 b2 8e 5e c8 40 08 05:55:03.640 READ FPDMA QUEUED 60 02 80 00 f8 00 00 b2 8e 5c 48 40 08 05:55:03.638 READ FPDMA QUEUED 60 02 c0 00 e8 00 00 b2 8e 59 88 40 08 05:55:03.635 READ FPDMA QUEUED Error 4392 [23] occurred at disk power-on lifetime: 39212 hours (1633 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 b2 8e 1c 68 40 00 Error: UNC at LBA = 0xb28e1c68 = 2995657832 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 02 a8 00 30 00 00 b2 8e 26 e0 40 08 05:55:00.074 READ FPDMA QUEUED 60 01 28 00 28 00 00 b2 8e 25 b8 40 08 05:55:00.072 READ FPDMA QUEUED 60 04 18 00 20 00 00 b2 8e 21 a0 40 08 05:55:00.072 READ FPDMA QUEUED 60 05 38 00 18 00 00 b2 8e 1c 68 40 08 05:55:00.072 READ FPDMA QUEUED 60 04 b8 00 10 00 00 b2 8e 36 e8 40 08 05:55:00.051 READ FPDMA QUEUED Error 4391 [22] occurred at disk power-on lifetime: 39212 hours (1633 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 b2 8e 1c 30 40 00 Error: UNC at LBA = 0xb28e1c30 = 2995657776 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 88 00 c8 00 00 b2 8e 3b a0 40 08 05:54:56.270 READ FPDMA QUEUED 61 00 88 00 c0 00 00 b2 8e 1b a0 40 08 05:54:56.270 WRITE FPDMA QUEUED 60 04 b8 00 b8 00 00 b2 8e 36 e8 40 08 05:54:56.270 READ FPDMA QUEUED 60 00 40 00 20 00 00 b2 8e 1c 28 40 08 05:54:56.269 READ FPDMA QUEUED 60 05 38 00 18 00 00 b2 8e 1c 68 40 08 05:54:56.269 READ FPDMA QUEUED Error 4390 [21] occurred at disk power-on lifetime: 39212 hours (1633 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 b2 8e 1b a0 40 00 Error: UNC at LBA = 0xb28e1ba0 = 2995657632 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 02 80 00 a8 00 00 b2 8e 31 88 40 08 05:54:52.651 READ FPDMA QUEUED 60 02 c0 00 a0 00 00 b2 8e 2e c8 40 08 05:54:52.649 READ FPDMA QUEUED 60 03 b0 00 98 00 00 b2 8e 2b 18 40 08 05:54:52.646 READ FPDMA QUEUED 60 01 90 00 90 00 00 b2 8e 29 88 40 08 05:54:52.643 READ FPDMA QUEUED 60 02 a8 00 88 00 00 b2 8e 26 e0 40 08 05:54:52.639 READ FPDMA QUEUED Error 4389 [20] occurred at disk power-on lifetime: 39207 hours (1633 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 92 08 20 40 00 Error: UNC at LBA = 0x07920820 = 127010848 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 05 40 00 e0 00 00 07 92 1e 50 40 08 00:34:01.794 READ FPDMA QUEUED 60 05 40 00 d8 00 00 07 92 19 10 40 08 00:34:01.790 READ FPDMA QUEUED 60 05 40 00 d0 00 00 07 92 13 d0 40 08 00:34:01.786 READ FPDMA QUEUED 60 00 20 00 c8 00 00 07 92 13 b0 40 08 00:34:01.727 READ FPDMA QUEUED 60 05 40 00 c0 00 00 07 92 0e 70 40 08 00:34:01.727 READ FPDMA QUEUED Error 4388 [19] occurred at disk power-on lifetime: 39021 hours (1625 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 b2 8e 26 98 40 00 Error: UNC at LBA = 0xb28e2698 = 2995660440 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 03 f8 00 d0 00 00 b2 8e 3b 98 40 08 05:41:04.752 READ FPDMA QUEUED 60 01 48 00 c8 00 00 b2 8e 3a 50 40 08 05:41:04.750 READ FPDMA QUEUED 61 03 f8 00 80 00 00 b2 8e 1b 98 40 08 05:41:04.750 WRITE FPDMA QUEUED 60 05 40 00 c0 00 00 b2 8e 1f 90 40 08 05:41:04.750 READ FPDMA QUEUED 60 05 40 00 b8 00 00 b2 8e 24 d0 40 08 05:41:04.750 READ FPDMA QUEUED Error 4387 [18] occurred at disk power-on lifetime: 39021 hours (1625 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 b2 8e 1b 98 40 00 Error: UNC at LBA = 0xb28e1b98 = 2995657624 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 c0 00 60 00 00 b2 8e 37 08 40 08 05:41:01.147 READ FPDMA QUEUED 60 01 50 00 58 00 00 b2 8e 35 b8 40 08 05:41:01.146 READ FPDMA QUEUED 60 01 38 00 50 00 00 b2 8e 34 80 40 08 05:41:01.144 READ FPDMA QUEUED 60 05 40 00 48 00 00 b2 8e 2f 40 40 08 05:41:01.143 READ FPDMA QUEUED 60 05 30 00 40 00 00 b2 8e 2a 10 40 08 05:41:01.142 READ FPDMA QUEUED Error 4386 [17] occurred at disk power-on lifetime: 39016 hours (1625 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 92 08 20 40 00 Error: UNC at LBA = 0x07920820 = 127010848 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 50 00 00 07 92 19 f0 40 08 00:14:55.509 READ FPDMA QUEUED 60 05 40 00 48 00 00 07 92 14 b0 40 08 00:14:55.509 READ FPDMA QUEUED 60 05 40 00 40 00 00 07 92 0f 70 40 08 00:14:55.509 READ FPDMA QUEUED 60 05 40 00 38 00 00 07 92 0a 30 40 08 00:14:55.509 READ FPDMA QUEUED 60 01 70 00 30 00 00 07 92 08 c0 40 08 00:14:55.508 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 10% 39378 2995657632 # 2 Short offline Completed without error 00% 39372 - # 3 Short offline Completed without error 00% 39371 - # 4 Extended offline Aborted by host 90% 39371 - # 5 Extended offline Aborted by host 90% 39348 - # 6 Short offline Completed without error 00% 35662 - # 7 Short offline Completed without error 00% 32260 - # 8 Short offline Completed without error 00% 27319 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 31/40 Celsius Lifetime Min/Max Temperature: 2/56 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (322) Index Estimated Time Temperature Celsius 323 2020-02-16 01:01 38 ******************* ... ..(143 skipped). .. ******************* 467 2020-02-16 03:25 38 ******************* 468 2020-02-16 03:26 37 ****************** ... ..( 29 skipped). .. ****************** 20 2020-02-16 03:56 37 ****************** 21 2020-02-16 03:57 36 ***************** ... ..( 64 skipped). .. ***************** 86 2020-02-16 05:02 36 ***************** 87 2020-02-16 05:03 35 **************** ... ..( 2 skipped). .. **************** 90 2020-02-16 05:06 35 **************** 91 2020-02-16 05:07 34 *************** ... ..( 4 skipped). .. *************** 96 2020-02-16 05:12 34 *************** 97 2020-02-16 05:13 33 ************** ... ..( 6 skipped). .. ************** 104 2020-02-16 05:20 33 ************** 105 2020-02-16 05:21 32 ************* ... ..( 48 skipped). .. ************* 154 2020-02-16 06:10 32 ************* 155 2020-02-16 06:11 31 ************ ... ..( 52 skipped). .. ************ 208 2020-02-16 07:04 31 ************ 209 2020-02-16 07:05 ? - 210 2020-02-16 07:06 31 ************ 211 2020-02-16 07:07 40 ********************* ... ..( 38 skipped). .. ********************* 250 2020-02-16 07:46 40 ********************* 251 2020-02-16 07:47 39 ******************** ... ..( 19 skipped). .. ******************** 271 2020-02-16 08:07 39 ******************** 272 2020-02-16 08:08 38 ******************* ... ..( 49 skipped). .. ******************* 322 2020-02-16 08:58 38 ******************* SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 38573 Vendor specific
February 16, 20206 yr Community Expert 1 hour ago, CHINCB said: Based on the Raw_Read_Error_Rate is this dive destined for the recyciling bin? Yes, that and it failed the SMART test.
Archived
This topic is now archived and is closed to further replies.