I'm pretty sure this drive is knackered but I haven't had a drive failure before so I am just checking to make sure

CHINCB

By CHINCB
in General Support

Recommended Posts

CHINCB Noob

CHINCB

Posted
Posted

Based on the Raw_Read_Error_Rate is this dive destined for the recyciling bin?

 

Quote

smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.98-Unraid] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD30EFRX-68EUZN0
Serial Number:    WD-WMC4N2898941
LU WWN Device Id: 5 0014ee 0592a2c03
Firmware Version: 80.00A80
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Feb 16 08:58:29 2020 SAST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 113)    The previous self-test completed having
                    the read element of the test failed.
Total time to complete Offline 
data collection:         (38940) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 391) minutes.
Conveyance self-test routine
recommended polling time:      (   5) minutes.
SCT capabilities:            (0x703d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    3987
  3 Spin_Up_Time            POS--K   194   173   021    -    5275
  4 Start_Stop_Count        -O--CK   087   087   000    -    13821
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   047   047   000    -    39382
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    307
192 Power-Off_Retract_Count -O--CK   200   200   000    -    203
193 Load_Cycle_Count        -O--CK   183   183   000    -    51858
194 Temperature_Celsius     -O---K   119   094   000    -    31
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    1
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb7  GPL,SL  VS       1  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 4393 (device log contains only the most recent 24 errors)
    CR     = Command Register
    FEATR  = Features Register
    COUNT  = Count (was: Sector Count) Register
    LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
    LH     = LBA High (was: Cylinder High) Register    ]   LBA
    LM     = LBA Mid (was: Cylinder Low) Register      ] Register
    LL     = LBA Low (was: Sector Number) Register     ]
    DV     = Device (was: Device/Head) Register
    DC     = Device Control Register
    ER     = Error register
    ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 4393 [0] occurred at disk power-on lifetime: 39212 hours (1633 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 b2 8e 26 98 40 00  Error: UNC at LBA = 0xb28e2698 = 2995660440

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 04 b8 00 20 00 00 b2 8e 62 30 40 08     05:55:03.649  READ FPDMA QUEUED
  60 00 88 00 18 00 00 b2 8e 61 a8 40 08     05:55:03.644  READ FPDMA QUEUED
  60 02 e0 00 10 00 00 b2 8e 5e c8 40 08     05:55:03.640  READ FPDMA QUEUED
  60 02 80 00 f8 00 00 b2 8e 5c 48 40 08     05:55:03.638  READ FPDMA QUEUED
  60 02 c0 00 e8 00 00 b2 8e 59 88 40 08     05:55:03.635  READ FPDMA QUEUED

Error 4392 [23] occurred at disk power-on lifetime: 39212 hours (1633 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 b2 8e 1c 68 40 00  Error: UNC at LBA = 0xb28e1c68 = 2995657832

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 02 a8 00 30 00 00 b2 8e 26 e0 40 08     05:55:00.074  READ FPDMA QUEUED
  60 01 28 00 28 00 00 b2 8e 25 b8 40 08     05:55:00.072  READ FPDMA QUEUED
  60 04 18 00 20 00 00 b2 8e 21 a0 40 08     05:55:00.072  READ FPDMA QUEUED
  60 05 38 00 18 00 00 b2 8e 1c 68 40 08     05:55:00.072  READ FPDMA QUEUED
  60 04 b8 00 10 00 00 b2 8e 36 e8 40 08     05:55:00.051  READ FPDMA QUEUED

Error 4391 [22] occurred at disk power-on lifetime: 39212 hours (1633 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 b2 8e 1c 30 40 00  Error: UNC at LBA = 0xb28e1c30 = 2995657776

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 88 00 c8 00 00 b2 8e 3b a0 40 08     05:54:56.270  READ FPDMA QUEUED
  61 00 88 00 c0 00 00 b2 8e 1b a0 40 08     05:54:56.270  WRITE FPDMA QUEUED
  60 04 b8 00 b8 00 00 b2 8e 36 e8 40 08     05:54:56.270  READ FPDMA QUEUED
  60 00 40 00 20 00 00 b2 8e 1c 28 40 08     05:54:56.269  READ FPDMA QUEUED
  60 05 38 00 18 00 00 b2 8e 1c 68 40 08     05:54:56.269  READ FPDMA QUEUED

Error 4390 [21] occurred at disk power-on lifetime: 39212 hours (1633 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 b2 8e 1b a0 40 00  Error: UNC at LBA = 0xb28e1ba0 = 2995657632

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 02 80 00 a8 00 00 b2 8e 31 88 40 08     05:54:52.651  READ FPDMA QUEUED
  60 02 c0 00 a0 00 00 b2 8e 2e c8 40 08     05:54:52.649  READ FPDMA QUEUED
  60 03 b0 00 98 00 00 b2 8e 2b 18 40 08     05:54:52.646  READ FPDMA QUEUED
  60 01 90 00 90 00 00 b2 8e 29 88 40 08     05:54:52.643  READ FPDMA QUEUED
  60 02 a8 00 88 00 00 b2 8e 26 e0 40 08     05:54:52.639  READ FPDMA QUEUED

Error 4389 [20] occurred at disk power-on lifetime: 39207 hours (1633 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 07 92 08 20 40 00  Error: UNC at LBA = 0x07920820 = 127010848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 05 40 00 e0 00 00 07 92 1e 50 40 08     00:34:01.794  READ FPDMA QUEUED
  60 05 40 00 d8 00 00 07 92 19 10 40 08     00:34:01.790  READ FPDMA QUEUED
  60 05 40 00 d0 00 00 07 92 13 d0 40 08     00:34:01.786  READ FPDMA QUEUED
  60 00 20 00 c8 00 00 07 92 13 b0 40 08     00:34:01.727  READ FPDMA QUEUED
  60 05 40 00 c0 00 00 07 92 0e 70 40 08     00:34:01.727  READ FPDMA QUEUED

Error 4388 [19] occurred at disk power-on lifetime: 39021 hours (1625 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 b2 8e 26 98 40 00  Error: UNC at LBA = 0xb28e2698 = 2995660440

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 03 f8 00 d0 00 00 b2 8e 3b 98 40 08     05:41:04.752  READ FPDMA QUEUED
  60 01 48 00 c8 00 00 b2 8e 3a 50 40 08     05:41:04.750  READ FPDMA QUEUED
  61 03 f8 00 80 00 00 b2 8e 1b 98 40 08     05:41:04.750  WRITE FPDMA QUEUED
  60 05 40 00 c0 00 00 b2 8e 1f 90 40 08     05:41:04.750  READ FPDMA QUEUED
  60 05 40 00 b8 00 00 b2 8e 24 d0 40 08     05:41:04.750  READ FPDMA QUEUED

Error 4387 [18] occurred at disk power-on lifetime: 39021 hours (1625 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 b2 8e 1b 98 40 00  Error: UNC at LBA = 0xb28e1b98 = 2995657624

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 c0 00 60 00 00 b2 8e 37 08 40 08     05:41:01.147  READ FPDMA QUEUED
  60 01 50 00 58 00 00 b2 8e 35 b8 40 08     05:41:01.146  READ FPDMA QUEUED
  60 01 38 00 50 00 00 b2 8e 34 80 40 08     05:41:01.144  READ FPDMA QUEUED
  60 05 40 00 48 00 00 b2 8e 2f 40 40 08     05:41:01.143  READ FPDMA QUEUED
  60 05 30 00 40 00 00 b2 8e 2a 10 40 08     05:41:01.142  READ FPDMA QUEUED

Error 4386 [17] occurred at disk power-on lifetime: 39016 hours (1625 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 07 92 08 20 40 00  Error: UNC at LBA = 0x07920820 = 127010848

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 40 00 50 00 00 07 92 19 f0 40 08     00:14:55.509  READ FPDMA QUEUED
  60 05 40 00 48 00 00 07 92 14 b0 40 08     00:14:55.509  READ FPDMA QUEUED
  60 05 40 00 40 00 00 07 92 0f 70 40 08     00:14:55.509  READ FPDMA QUEUED
  60 05 40 00 38 00 00 07 92 0a 30 40 08     00:14:55.509  READ FPDMA QUEUED
  60 01 70 00 30 00 00 07 92 08 c0 40 08     00:14:55.508  READ FPDMA QUEUED

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       10%     39378         2995657632
# 2  Short offline       Completed without error       00%     39372         -
# 3  Short offline       Completed without error       00%     39371         -
# 4  Extended offline    Aborted by host               90%     39371         -
# 5  Extended offline    Aborted by host               90%     39348         -
# 6  Short offline       Completed without error       00%     35662         -
# 7  Short offline       Completed without error       00%     32260         -
# 8  Short offline       Completed without error       00%     27319         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
Device State:                        Active (0)
Current Temperature:                    31 Celsius
Power Cycle Min/Max Temperature:     31/40 Celsius
Lifetime    Min/Max Temperature:      2/56 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (322)

Index    Estimated Time   Temperature Celsius
 323    2020-02-16 01:01    38  *******************
 ...    ..(143 skipped).    ..  *******************
 467    2020-02-16 03:25    38  *******************
 468    2020-02-16 03:26    37  ******************
 ...    ..( 29 skipped).    ..  ******************
  20    2020-02-16 03:56    37  ******************
  21    2020-02-16 03:57    36  *****************
 ...    ..( 64 skipped).    ..  *****************
  86    2020-02-16 05:02    36  *****************
  87    2020-02-16 05:03    35  ****************
 ...    ..(  2 skipped).    ..  ****************
  90    2020-02-16 05:06    35  ****************
  91    2020-02-16 05:07    34  ***************
 ...    ..(  4 skipped).    ..  ***************
  96    2020-02-16 05:12    34  ***************
  97    2020-02-16 05:13    33  **************
 ...    ..(  6 skipped).    ..  **************
 104    2020-02-16 05:20    33  **************
 105    2020-02-16 05:21    32  *************
 ...    ..( 48 skipped).    ..  *************
 154    2020-02-16 06:10    32  *************
 155    2020-02-16 06:11    31  ************
 ...    ..( 52 skipped).    ..  ************
 208    2020-02-16 07:04    31  ************
 209    2020-02-16 07:05     ?  -
 210    2020-02-16 07:06    31  ************
 211    2020-02-16 07:07    40  *********************
 ...    ..( 38 skipped).    ..  *********************
 250    2020-02-16 07:46    40  *********************
 251    2020-02-16 07:47    39  ********************
 ...    ..( 19 skipped).    ..  ********************
 271    2020-02-16 08:07    39  ********************
 272    2020-02-16 08:08    38  *******************
 ...    ..( 49 skipped).    ..  *******************
 322    2020-02-16 08:58    38  *******************

SCT Error Recovery Control:
           Read:     70 (7.0 seconds)
          Write:     70 (7.0 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            0  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            1  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4        38573  Vendor specific

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
Go to topic listing