propman07 Posted February 21, 2020 Share Posted February 21, 2020 (edited) Hi- So I've been getting notifications in UNRAID telling me that my Docker image file is getting full (currently 91 % used), Rootfs file is getting full (currently 100 % used), and Unable to write to Docker Image. These all show up when I run the fix common problems app. I tried to download the diagnostic file, but when I click on download, the page goes blank, and the lower left hand corer toggles between array started and array undefined. If I stop the array and restart it, the array appears to come back online, but when I go to the docker tab, it says that the docker image failed to start? Error message from main page, array devices tab: (no information on page) Warning: syntax error, unexpected $end, expecting TC_DOLLAR_CURLY or TC_QUOTED_STRING or '"' in state/disks.ini on line 274 in /usr/local/emhttp/plugins/dynamix/include/DeviceList.php on line 20 Error message from main page, array operation tab: (page generates, stop array button works) Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(501) : eval()'d code on line 18 Thanks for any help that you can provide. Screen shots attached. Edited February 21, 2020 by propman07 added screenshots, updated title Quote Link to comment
Squid Posted February 21, 2020 Share Posted February 21, 2020 from the terminal, diagnostics It'll get saved to the flash drive in the logs folder. Upload that zip Quote Link to comment
propman07 Posted February 21, 2020 Author Share Posted February 21, 2020 Just now, Squid said: from the terminal, diagnostics It'll get saved to the flash drive in the logs folder. Upload that zip Quote Link to comment
propman07 Posted February 21, 2020 Author Share Posted February 21, 2020 (edited) Thanks. I tried to reboot the tower, and the system came back online. Array started, but in the process of parity check. Diagnostic file attached...thanks for the command to do that, as well as the location of the file. dlvtower-diagnostics-20200220-1721.zip ...just sent a 12 pack your direction....thanks for the help. Edited February 21, 2020 by propman07 Quote Link to comment
Squid Posted February 21, 2020 Share Posted February 21, 2020 Thank you I was hoping that you'd do the diagnostics command before rebooting. Wait for the log to start filling up again, then post a new set of diagnostics Quote Link to comment
propman07 Posted February 21, 2020 Author Share Posted February 21, 2020 (edited) not sure if I should have waited longer or not....new logs attached. dlvtower-diagnostics-20200220-1749.zip (web interface became non-responsive, so I hit the big power switch about a half an hour ago (17:15)...didn't think I could get a terminal window opened) Edited February 21, 2020 by propman07 reason for unscheduled reboot Quote Link to comment
Squid Posted February 21, 2020 Share Posted February 21, 2020 Nothing particularly changed on the usage of the log. Quote Link to comment
propman07 Posted February 21, 2020 Author Share Posted February 21, 2020 1 minute ago, Squid said: Nothing particularly changed on the usage of the log. Okay. I'll wait an hour (or two?) and post a new log. Array is up and running. I can access shares. Docker has same error (failed to start). I have terminal access. Thanks. Quote Link to comment
Squid Posted February 21, 2020 Share Posted February 21, 2020 7 minutes ago, propman07 said: Docker has same error (failed to start) I missed that being mentioned. Try this Settings - Docker - Disable the service. Delete the image, re-enable the service Apps, Previous Apps, Check off what you want Quote Link to comment
propman07 Posted February 21, 2020 Author Share Posted February 21, 2020 (edited) 2 minutes ago, Squid said: I missed that being mentioned. Try this Settings - Docker - Disable the service. Delete the image, re-enable the service Apps, Previous Apps, Check off what you want okay...so set enable docker to no...if I delete the image, am I going to have to set up all of the dockers again? I had a few customizations for plex, etc.? While I have docker enable set to no...should I consider increasing the size from 20GB default? Edited February 21, 2020 by propman07 Quote Link to comment
Squid Posted February 21, 2020 Share Posted February 21, 2020 the appdata will be safe and the templates will be already filled out and reinstalled the same way. Quote Link to comment
propman07 Posted February 21, 2020 Author Share Posted February 21, 2020 19 minutes ago, Squid said: the appdata will be safe and the templates will be already filled out and reinstalled the same way. Okay....all docker apps installed....system is telling me I'm at 76% usage. Quote Link to comment
Squid Posted February 21, 2020 Share Posted February 21, 2020 76% what docker or log Quote Link to comment
propman07 Posted February 21, 2020 Author Share Posted February 21, 2020 not sure how to tell....if I go to terminal, looking at size of docker.img file...21474836480, which I'm guessing is around 21.4 GB. Quote Link to comment
Squid Posted February 21, 2020 Share Posted February 21, 2020 diagnostics would tell or df -h Quote Link to comment
propman07 Posted February 21, 2020 Author Share Posted February 21, 2020 Just now, Squid said: diagnostics would tell or df -h df -h screen shot attached Quote Link to comment
Squid Posted February 21, 2020 Share Posted February 21, 2020 One problem fixed. Now wait and see what happens Quote Link to comment
propman07 Posted February 21, 2020 Author Share Posted February 21, 2020 Okay. So it looks like deleting the docker image and re-creating it fixed part of the problem...so I'll have to wait and see about the other two. Attaching log file for now. I'll revisit this thread sometime on Friday to post results. Thanks again for your help. dlvtower-diagnostics-20200220-1904.zip Quote Link to comment
propman07 Posted February 21, 2020 Author Share Posted February 21, 2020 Docker image at 76% according to the dashboard. Things seem to be back to normal...more or less. Attached latest diagnostic file for review. dlvtower-diagnostics-20200221-1306.zip Quote Link to comment
Squid Posted February 21, 2020 Share Posted February 21, 2020 So basically, nothing's changed. It was probably docker spamming up the log once whatever happened with the image took place. Personally though, I'd increase the image size to 25 or 30G just for some extra breathing room. Quote Link to comment
propman07 Posted February 21, 2020 Author Share Posted February 21, 2020 Okay. I'll increase the size of the image to 30GB for now. Thanks again for your help. Quote Link to comment
techystreamer Posted March 10, 2020 Share Posted March 10, 2020 On 2/20/2020 at 9:20 PM, Squid said: the appdata will be safe and the templates will be already filled out and reinstalled the same way. I was having a similar problem and I followed the instructions to delete the docker image. The dockers are deleted, app data is there, but when I try to re-install the dockers the templates are not the same as I had them. Anything im doing wrong? Quote Link to comment
trurl Posted March 10, 2020 Share Posted March 10, 2020 2 minutes ago, techystreamer said: when I try to re-install the dockers the templates are not the same as I had them. Are you using the Previous Apps feature on the Apps page? Quote Link to comment
trurl Posted March 10, 2020 Share Posted March 10, 2020 4 minutes ago, techystreamer said: I was having a similar problem Also, you should post your diagnostics so we can see if we can help figure out how you got into this situation to begin with. Quote Link to comment
techystreamer Posted March 10, 2020 Share Posted March 10, 2020 Awe, thanks for that. Never had to do that before. What about a docker that I tried to install without the previous apps selected? The one I tried has the standard template? Is there a way to restore it? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.