onureemus Posted February 22, 2020 Share Posted February 22, 2020 (edited) If i use the either "steam lan cache" or "steam cache bundle" they seem not to work with unraid 6.8.2 (prob im doing something wrong), but they did work with unraid 6.7.1 (@100mbps) and as i updated to 6.8.2 i did a fresh install formatted all drives (cause im still in the setup stage) and opted to use the 10gbps connection only, SMB works fine from my pc's ssd to the array about 550mb/s and thats cause the ssd's speed is 550mb/s read also i know the box has internet connection cause i installed the docker containers i did tried lot of settings and ip's and docker container network modes, also i really dont want to go back to 6.7.1 cause the smb was a bit wonky for me there and cause the docker speed was as fast as my connection so no win there Model: Custom M/B: ASUSTeK COMPUTER INC. Z10PA-D8 Series Version Rev 1.xx BIOS: American Megatrends Inc. Version 3801. Dated: 08/23/2019 CPU: Intel® Xeon® CPU E5-2603 v4 @ 1.70GHz (2 of them) HVM: Enabled IOMMU: Enabled Cache: 384 KiB, 1536 KiB, 15360 KiB, 384 KiB, 1536 KiB, 15360 KiB Memory: 64 GiB DDR4 Multi-bit ECC (32gb per cpu) Network: bond0: fault-tolerance (active-backup), mtu 1500 eth0: interface down eth1: 10000 Mbps, full duplex, mtu 1500 Kernel: Linux 4.19.98-Unraid x86_64 OpenSSL: 1.1.1d Edited February 25, 2020 by onureemus Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.