5252525111 Posted February 27, 2020 Share Posted February 27, 2020 (edited) Hi, so I'm new to Unraid (running a trail right now) and just installed the OS on my old machine. I've spent the last day doing research trying to figure out how to get my network card working. I've attached my diagnostics as that seems to be what everyone recommends. This is also whats found under Tools>System Devices ```` IOMMU group 19: [8086:1539] 03:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03) IOMMU group 20: [10ec:816e] 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 816e (rev 1a) [10ec:8168] 04:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 1a) [10ec:816a] 04:00.2 Serial controller: Realtek Semiconductor Co., Ltd. Device 816a (rev 1a) [10ec:816d] 04:00.4 USB controller: Realtek Semiconductor Co., Ltd. Device 816d (rev 1a) [10ec:816c] 04:00.7 IPMI Interface: Realtek Semiconductor Co., Ltd. Device 816c (rev 1a) IOMMU group 22: [1d6a:07b1] 09:00.0 Ethernet controller: Aquantia Corp. AQC107 NBase-T/IEEE 802.3bz Ethernet Controller [AQtion] (rev 02) ```` Any help would be greatly appreciated. tatooine-diagnostics-20200227-0811.zip Edited February 27, 2020 by 5252525111 spelling Quote Link to comment
JorgeB Posted February 27, 2020 Share Posted February 27, 2020 NIC is detected but fails to initialize: Feb 26 21:00:29 Tower kernel: atlantic: FW kickstart failed Feb 26 21:00:29 Tower kernel: atlantic: probe of 0000:09:00.0 failed with error -5 Maybe a firmware issue? 1 Quote Link to comment
5252525111 Posted February 27, 2020 Author Share Posted February 27, 2020 Hum... So I've tried to see if I can get a linux distribution of the firmware, but can't seem to figure out how to run or do anything in command. There is no `sudo` `apt` or `yum` and my root account doesn't have permission to execute the sh files Any one have advice on this? Quote Link to comment
oski Posted January 31, 2021 Share Posted January 31, 2021 On 2/27/2020 at 6:09 PM, 5252525111 said: Hum... So I've tried to see if I can get a linux distribution of the firmware, but can't seem to figure out how to run or do anything in command. There is no `sudo` `apt` or `yum` and my root account doesn't have permission to execute the sh files Any one have advice on this? Have you solved it? I have the same problem. Quote Link to comment
5252525111 Posted January 31, 2021 Author Share Posted January 31, 2021 @oski Never figured it out, I ended up buying a used intel card off ebay. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.