Slycooper Posted December 11, 2022 Share Posted December 11, 2022 (edited) Hey ! idk what you did, but since the last update this is actually working now! Thank you ! Still sharing gpustat.cfg in case of gpustat.cfg Edited December 11, 2022 by Slycooper 1 Quote Link to comment
Wookiee of the Year Posted December 18, 2022 Share Posted December 18, 2022 I just installed Radeon top and gpustats plugin, but I am getting N/A for everything on the dashboard. I'm guessing this is because I don't have any option for unit ID in the settings dropdown. Here is my prerequisite info: 1c) 1671328975.837183: bus 01, gpu 0.00%, ee 0.00%, vgt 0.00%, ta 0.00%, sx 0.00%, sh 0.00%, spi 0.00%, sc 0.00%, pa 0.00%, db 0.00%, cb 0.00%, vram 0.13% 5.30mb, gtt 0.23% 9.04mb, mclk 10.53% 0.150ghz, sclk 31.98% 0.317ghz 2) just hangs, left it for a few minutes but no result 3) 4) VENDOR="amd" GPUID="" TEMPFORMAT="C" DISPCLOCKS="1" DISPENCDEC="1" DISPPCIUTIL="1" DISPTEMP="1" DISPFAN="1" DISPPWRDRAW="1" DISPPWRSTATE="1" DISPTHROTTLE="1" DISPSESSIONS="1" UIREFRESH="1" UIREFRESHINT="1000" DISPMEMUTIL="1" DISP3DRENDER="1" DISPBLITTER="1" DISPVIDEO="1" DISPVIDENH="1" DISPINTERRUPT="1" DISPEVENT="1" DISPVERTEX="1" DISPTEXTURE="1" DISPSHADEREXP="1" DISPSEQUENCER="1" DISPSHADERINTER="1" DISPSCANCON="1" DISPPRIMASSEM="1" DISPDEPTHBLK="1" DISPCOLORBLK="1" DISPGFXTRANS="1" Any help would be greatly appreciated! Quote Link to comment
b3rs3rk Posted December 21, 2022 Author Share Posted December 21, 2022 @Wookiee of the Year What is the result of the following command on your system? lspci | grep VGA Quote Link to comment
b3rs3rk Posted December 21, 2022 Author Share Posted December 21, 2022 On 12/7/2022 at 6:48 PM, Joker169 said: Sure. 0 Object { code: 302, message: "Vendor command returned unparseable data.", extra: "" } That is bizarre to say the least. I need to set up a screen share session with you to diagnose further as there really shouldn't be a disparity between running it from web and CLI. Quote Link to comment
b3rs3rk Posted December 21, 2022 Author Share Posted December 21, 2022 On 12/10/2022 at 10:34 AM, Jclendineng said: Version 2022.11.30a I get N/A for everything as well, just adding that here. I have had this for a while and thought it was just something I did, good to see its not just me. Edit: Rolled back per the person a few posts back and it works, thanks!! https://raw.githubusercontent.com/b3rs3rk/gpustat-unraid/6cf1b1e96bc8cd5c1cf7ac8fefea1271d8891e26/gpustat.plg If you're happy with staying version locked forever, cool. But if you want help fixing the issue I will need a lot more detail starting with everything I outline in the troubleshooting section of the first post of this thread. Quote Link to comment
Wookiee of the Year Posted December 21, 2022 Share Posted December 21, 2022 9 hours ago, b3rs3rk said: @Wookiee of the Year What is the result of the following command on your system? lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06) 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tonga PRO [Radeon R9 285/380] (rev f1) Quote Link to comment
Jclendineng Posted December 26, 2022 Share Posted December 26, 2022 On 12/21/2022 at 9:05 AM, b3rs3rk said: If you're happy with staying version locked forever, cool. But if you want help fixing the issue I will need a lot more detail starting with everything I outline in the troubleshooting section of the first post of this thread. I am, its just utilization, but I have updated again and included the troubleshooting steps listed in the OP, thank you! Edit: I updated and it works...Im not 100% sure why. Possibly the APU needed reset, but I had thought that last time and rebooted which should reset it, which didn't fix. Ill reply with drag info if it pops up again...Thank you! Quote Link to comment
randdsec Posted December 29, 2022 Share Posted December 29, 2022 Hello Currently running into a similar problem as other have listed where my gpu stats are not populating as well Here is the list of steps i have done: - uninstalled and reinstalled gpustat and Radeon Top - restarted the tower after the uninstalls - attached the results of the results of commands listed on page 1 as per the notes - used the github links for the gpustat app for a manual install: >>https://raw.githubusercontent.com/b3rs3rk/gpustat-unraid/6cf1b1e96bc8cd5c1cf7ac8fefea1271d8891e26/gpustat.plg >> https://raw.githubusercontent.com/b3rs3rk/gpustat-unraid/master/gpustat.plg please let me know if anything else is needed thank you for your time! gpustat.cfg gpustatus.php radeontop_cmd_output.md 1 Quote Link to comment
Joker169 Posted December 29, 2022 Share Posted December 29, 2022 On 12/21/2022 at 8:00 AM, b3rs3rk said: That is bizarre to say the least. I need to set up a screen share session with you to diagnose further as there really shouldn't be a disparity between running it from web and CLI. Okay, let me know when you are available to do that. Also what platform you would like to use and related info, so it can be setup for the session via DM or your preference. Quote Link to comment
knights_of_pine Posted December 31, 2022 Share Posted December 31, 2022 intel i5-12400 on my gpu statisics plug-in it is not showing "imc bus utilization" receive and transmit just say NA. even when transcoding. tried rebooting server, no dice. any ideas? thank you! Quote Link to comment
Robert_Chandra Posted January 5, 2023 Share Posted January 5, 2023 I'm getting the same issue as above, AMD GPU with RadeonTop installed, no options to select from in "Unit ID for Dashboard". lspci | grep VGA gives me this: 07:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] (rev ef) Trying to see my GPU usage because I'm getting a stutter from the encoder while using the steam-headless container. Any help is appreciated. Quote Link to comment
Balor Posted January 6, 2023 Share Posted January 6, 2023 @b3rs3rk I've opened a PR on GitHub to fix the issue with the AMD GPU. They'll be properly shown in the GPU Settings now. https://github.com/b3rs3rk/gpustat-unraid/pull/50 3 Quote Link to comment
byb Posted January 12, 2023 Share Posted January 12, 2023 (edited) On 11/29/2022 at 6:10 AM, Kewjoe said: 1. Remove the current plugin 2. go to Plugins section > Install Plugins 3. Enter the below URL and Press "Install" https://raw.githubusercontent.com/b3rs3rk/gpustat-unraid/6cf1b1e96bc8cd5c1cf7ac8fefea1271d8891e26/gpustat.plg I just wanted to say thank you for posting this. The current version 2022.11.30a was not detecting one of my GPUs. Both are passed through to VMs, when both VMs were stopped, only one GPU appeared in GPU Statistics, there was a ' -: ' for the other. Reverting to this version, 2022.02.22, stopping my VMs, and running SpaceinvaderOne's scripts produced this output: ''' I can see these Nvidia gpus in your server GPU 0: NVIDIA ... GPU 1: NVIDIA ... ------- Persistence mode is already Enabled for GPU 00000000.02:00.0. Enabled persistence mode for GPU 00000000.65:00.0. All done. Power state is P8 P0 -------- Power draw is now power.draw [W] [N/A] 104.92 W ''' Immediately afterwards, I checked the dashboard, GPU1 showed 9-10 watts of usage. I also have a 1200 watt UPS which I have configured for Unraid. Usually, I see about 14-18% (168-192 watts) usage with all VMs stopped. After running the script, it shows about 10-14% (120-168 watts). I added another one of SpaceinvaderOne's script to run every 5 minutes "*/5 * * * *". While I cannot be 100% sure that both my GPUs were reaching an S8 sleep state before I ran SpaceinvaderOne's script, I'm glad to have the peace of mind from using this plug-in to confirm I'm doing what I can to reduce power usage. Thank you everyone. Edited January 12, 2023 by byb 1 Quote Link to comment
bigbangus Posted January 14, 2023 Share Posted January 14, 2023 Same issue here. I’ve got two 1660 Ti in my server and oddly enough the Gigabyte won’t work in this plugin but the MSI does. I ended up stubbing the MSI for the VM so the problematic Gigabyte required the plug-in to be rolled back for it to work. Quote Link to comment
J05u Posted January 15, 2023 Share Posted January 15, 2023 Curious if this plugin should show which app is using gpu... Like Plex when intel igpu doing quicksync, or i messed up something and this not showing for me Quote Link to comment
Shaddix Posted January 19, 2023 Share Posted January 19, 2023 On 11/28/2022 at 11:10 PM, Kewjoe said: 1. Remove the current plugin 2. go to Plugins section > Install Plugins 3. Enter the below URL and Press "Install" https://raw.githubusercontent.com/b3rs3rk/gpustat-unraid/6cf1b1e96bc8cd5c1cf7ac8fefea1271d8891e26/gpustat.plg Thank you very much. Helped me also a lot. Quote Link to comment
xaositek Posted January 20, 2023 Share Posted January 20, 2023 Any updates on Multiple GPU support? https://github.com/b3rs3rk/gpustat-unraid/issues/38 Quote Link to comment
JesterEE Posted January 25, 2023 Share Posted January 25, 2023 Started using a new video card in Unraid this week and noticed the card name and PCIe Gen columns on the first line are overlapping for may card with a long name. Can the card name be truncated depending on the width of the window (and subsequently the column)? Quote Link to comment
Lilarcor Posted February 1, 2023 Share Posted February 1, 2023 I got NA issue with latest version as well. Rollback to older one works for me. Quote Link to comment
ConnerVT Posted February 2, 2023 Share Posted February 2, 2023 (edited) Been using this plugin for awhile, works great with my Nvidia P400. Thank you for this. Recently upgraded my CPU to a 5700G APU. I am using the iGPU as a local display on the server, driving a PiKVM, and all of that works well. My question is, can/should this plugin also be able to display the AMD statistics? When I configure it for AMD, I don't get a real selection for it in the config page, and then only N/A across the board for the stats. I do have Radeon-Top installed. Edited February 2, 2023 by ConnerVT added Radeon-Top is installed 1 Quote Link to comment
Nuuki Posted February 9, 2023 Share Posted February 9, 2023 I'm also seeing N/A running the latest version. Running intel_gpu_top from the command line I am seeing expected results. gpustat.txt intel_gpu_top.txt gpustat.cfg Quote Link to comment
zbot Posted February 14, 2023 Share Posted February 14, 2023 (edited) Hi, thanks for this plugin. Frequently for me the intel_gpu_top command returns all zeroes and then dashboard also displays all zeroes. When running intel_gpu_top myself interactively from the command line, it doesn't show load dropping to zero. Thanks for any insight you have. Quote root@unraid:~# timeout -k .500 .400 intel_gpu_top -J -s 250 { "period": { "duration": 29.724667, "unit": "ms" }, "frequency": { "requested": 0.000000, "actual": 0.000000, "unit": "MHz" }, "interrupts": { "count": 0.000000, "unit": "irq/s" }, "rc6": { "value": 0.000000, "unit": "%" }, "power": { "GPU": 0.000000, "Package": 3.211440, "unit": "W" }, "engines": { "Render/3D/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Blitter/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "VideoEnhance/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" } }, "clients": { "4294963488": { "name": "Plex Transcoder", "pid": "3808", "engine-classes": { "Render/3D": { "busy": "0.000000", "unit": "%" }, "Blitter": { "busy": "0.000000", "unit": "%" }, "Video": { "busy": "0.000000", "unit": "%" }, "VideoEnhance": { "busy": "0.000000", "unit": "%" } } } } }, { "period": { "duration": 280.711452, "unit": "ms" }, "frequency": { "requested": 0.000000, "actual": 0.000000, "unit": "MHz" }, "interrupts": { "count": 0.000000, "unit": "irq/s" }, "rc6": { "value": 0.000000, "unit": "%" }, "power": { "GPU": 0.000000, "Package": 2.041235, "unit": "W" }, "engines": { "Render/3D/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Blitter/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "VideoEnhance/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" } }, "clients": { "4294963488": { "name": "Plex Transcoder", "pid": "3808", "engine-classes": { "Render/3D": { "busy": "0.000000", "unit": "%" }, "Blitter": { "busy": "0.000000", "unit": "%" }, "Video": { "busy": "0.000000", "unit": "%" }, "VideoEnhance": { "busy": "0.000000", "unit": "%" } } } } Quote root@unraid:~# cat /boot/config/plugins/gpustat/gpustat.cfg VENDOR="intel" GPUID="0000-00-000-000000" TEMPFORMAT="C" DISPCLOCKS="1" DISPENCDEC="1" DISPPCIUTIL="1" DISPTEMP="0" DISPFAN="0" DISPPWRDRAW="1" DISPPWRSTATE="1" DISPTHROTTLE="1" DISPSESSIONS="1" UIREFRESH="1" UIREFRESHINT="2000" DISPMEMUTIL="0" DISP3DRENDER="1" DISPBLITTER="1" DISPVIDEO="1" DISPVIDENH="1" DISPINTERRUPT="1" DISPEVENT="1" DISPVERTEX="1" DISPTEXTURE="1" DISPSHADEREXP="1" DISPSEQUENCER="1" DISPSHADERINTER="1" DISPSCANCON="1" DISPPRIMASSEM="1" DISPDEPTHBLK="1" DISPCOLORBLK="1" DISPGFXTRANS="1" Edited February 14, 2023 by zbot Quote Link to comment
jeffreywhunter Posted February 14, 2023 Share Posted February 14, 2023 Trying to update this plugin on 6.11.5, getting this: Update Plugin plugin: updating: gpustat.plg Executing hook script: pre_plugin_checks ******************************************************************** No vendor utilities found. Plugin install terminated due to failed prerequisites. ******************************************************************** plugin: run failed: /bin/bash Executing hook script: post_plugin_checks Any ideas why? Quote Link to comment
SimonF Posted February 14, 2023 Share Posted February 14, 2023 2 minutes ago, jeffreywhunter said: Trying to update this plugin on 6.11.5, getting this: Update Plugin plugin: updating: gpustat.plg Executing hook script: pre_plugin_checks ******************************************************************** No vendor utilities found. Plugin install terminated due to failed prerequisites. ******************************************************************** plugin: run failed: /bin/bash Executing hook script: post_plugin_checks Any ideas why? You need intel gpu top/radeontop or nvidia drivers loaded first depending on gpu Quote Link to comment
jeffreywhunter Posted February 14, 2023 Share Posted February 14, 2023 1 hour ago, SimonF said: You need intel gpu top/radeontop or nvidia drivers loaded first depending on gpu That made a difference, I was able to load the drivers and then update the plugin. Unfortunately, I'm seeing N/A on all the various display items. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.