SimonF Posted March 19, 2023 Share Posted March 19, 2023 50 minutes ago, Juani said: Thanks SimonF for your quickly response. Something very strange is happening. In your plugin, when I change "Change me" to "Intel" and click on "Apply", it does not save the changes. I have tried several browsers, and nothing. To make sure, I have reinstalled the ""official"" Plugin and it does let me save the changes. OK thanks will look into it. The standard plugin will just run intel_gpu_top -J -s 250 so if that is producing output it should show in the gui. Quote Link to comment
Juani Posted March 19, 2023 Share Posted March 19, 2023 6 minutes ago, SimonF said: OK thanks will look into it. The standard plugin will just run intel_gpu_top -J -s 250 so if that is producing output it should show in the gui. Thanks mate. intel_gpu_top -J -s 250 is producing output but in the GUI not work.... Nor by modifying the gpustat.cfg to 0000:00:02.0.. I will also wait to see if your plugin is fixed. Thanks for all Quote Link to comment
SimonF Posted March 19, 2023 Share Posted March 19, 2023 13 minutes ago, Juani said: Thanks mate. intel_gpu_top -J -s 250 is producing output but in the GUI not work.... Nor by modifying the gpustat.cfg to 0000:00:02.0.. I will also wait to see if your plugin is fixed. Thanks for all If you install my plugin you will just need to manually change to the following in the .cfg VENDOR = "intel" GPUID = "0000:00:02.1" Quote Link to comment
Juani Posted March 19, 2023 Share Posted March 19, 2023 (edited) 45 minutes ago, SimonF said: If you install my plugin you will just need to manually change to the following in the .cfg VENDOR = "intel" GPUID = "0000:00:02.1" Nothing.... with your plugin and 0000:00:02.1, the GUI displays N/A. And with 0000:00:02.0, the GUI display 0% load. I just playing one movie in Plex with HW Transcoding.. Edited March 19, 2023 by Juani Quote Link to comment
SimonF Posted March 19, 2023 Share Posted March 19, 2023 2 minutes ago, Juani said: Nothing.... with your plugin and 0000:00:02.1, the GUI displays N/A. And with 0000:00:02.0, the GUI display 0% load. I just playing one movie in Plex with HW Transcoding.. yes sorry should have been 02.0 do you see /tmp/gpujson2 now? Quote Link to comment
Juani Posted March 19, 2023 Share Posted March 19, 2023 (edited) 24 minutes ago, SimonF said: yes sorry should have been 02.0 do you see /tmp/gpujson2 now? Yes, Time = Sun, 19 Mar 2023 22:51:58 +0100 {"clock":0,"fan":"N\/A","memclock":"N\/A","memutil":"N\/A","memused":"N\/A","power":"0","powermax":"N\/A","rxutil":"N\/A","txutil":"N\/A","temp":"N\/A","tempmax":"N\/A","util":"0%","vendor":"Intel","name":"AlderLake-S GT1","3drender":"0%","blitter":"0%","interrupts":0,"powerutil":"0%","video":"0%","videnh":"0%"} Edited March 19, 2023 by Juani Quote Link to comment
Juani Posted March 21, 2023 Share Posted March 21, 2023 (edited) Now it's working! Thanks!! Edited March 21, 2023 by Juani Quote Link to comment
SimonF Posted March 21, 2023 Share Posted March 21, 2023 13 minutes ago, Juani said: Now it's working! Thanks!! Was that with the latest update? Quote Link to comment
Juani Posted March 21, 2023 Share Posted March 21, 2023 5 minutes ago, SimonF said: Was that with the latest update? It seems so, with the recent update. But the error of not saving the settings when hitting "Apply" persists. At least in my case. Quote Link to comment
SimonF Posted March 21, 2023 Share Posted March 21, 2023 2 minutes ago, Juani said: It seems so, with the recent update. But the error of not saving the settings when hitting "Apply" persists. At least in my case. Not sure why that is as was working fine on both 6.11.5 and 6.12 I have not changed the dashboard for 6.11 so that is strange. Quote Link to comment
alturismo Posted March 21, 2023 Share Posted March 21, 2023 may as small feedback, fresh install of the plugin ends here in a empty dash ... worked before besides saving disabling any card. Mar 21 22:31:22 AlsServer root: plugin: creating: /boot/config/plugins/gpustat/gpustat-2023.03.21a-x86_64.txz - downloading from URL https://raw.githubusercontent.com/SimonFair/gpustat-unraid/master/pkg/gpustat-2023.03.21a-x86_64.txz Mar 21 22:31:23 AlsServer root: plugin: running: upgradepkg --install-new /boot/config/plugins/gpustat/gpustat-2023.03.21a-x86_64.txz Mar 21 22:31:23 AlsServer root: plugin: creating: /boot/config/plugins/gpustat/gpustat.cfg - from INLINE content Mar 21 22:31:23 AlsServer root: plugin: gpustat.plg installed Mar 21 22:32:42 AlsServer root: plugin: running: anonymous i have multi GPU setup intel igpu and 2 x Nvidia's as note Quote Link to comment
alturismo Posted March 21, 2023 Share Posted March 21, 2023 ok, this happens without setup, so after i setup a card dash is back up again and then its working as expected, so its just the 1st setup without config which causes this issue, just as note Quote Link to comment
SimonF Posted March 21, 2023 Share Posted March 21, 2023 (edited) 6 minutes ago, alturismo said: may as small feedback, fresh install of the plugin ends here in a empty dash ... worked before besides saving disabling any card. Mar 21 22:31:22 AlsServer root: plugin: creating: /boot/config/plugins/gpustat/gpustat-2023.03.21a-x86_64.txz - downloading from URL https://raw.githubusercontent.com/SimonFair/gpustat-unraid/master/pkg/gpustat-2023.03.21a-x86_64.txz Mar 21 22:31:23 AlsServer root: plugin: running: upgradepkg --install-new /boot/config/plugins/gpustat/gpustat-2023.03.21a-x86_64.txz Mar 21 22:31:23 AlsServer root: plugin: creating: /boot/config/plugins/gpustat/gpustat.cfg - from INLINE content Mar 21 22:31:23 AlsServer root: plugin: gpustat.plg installed Mar 21 22:32:42 AlsServer root: plugin: running: anonymous i have multi GPU setup intel igpu and 2 x Nvidia's as note Which version. are you running? Edited March 21, 2023 by SimonF Quote Link to comment
alturismo Posted March 21, 2023 Share Posted March 21, 2023 1 minute ago, SimonF said: Which versio. are you running? unraid 6.12rc2, plugin ... fresh install from https://raw.githubusercontent.com/SimonFair/gpustat-unraid/master/gpustat.plg 1 Quote Link to comment
SimonF Posted March 21, 2023 Share Posted March 21, 2023 5 minutes ago, alturismo said: ok, this happens without setup, so after i setup a card dash is back up again and then its working as expected, so its just the 1st setup without config which causes this issue, just as note Thanks will look into it. Quote Link to comment
SimonF Posted March 21, 2023 Share Posted March 21, 2023 29 minutes ago, alturismo said: unraid 6.12rc2, plugin ... fresh install from https://raw.githubusercontent.com/SimonFair/gpustat-unraid/master/gpustat.plg Should be fixed now. 1 Quote Link to comment
DataCollector Posted March 23, 2023 Share Posted March 23, 2023 (edited) Hello. I just looked up some of the earlier postings, but I did not find this. Maybe I did just not recognise it, because my english is not the best? Since I was tempted to change my BTRFS Pool Raid0 to ZFS (and a warning for the plugin update 'disclocation' not beeing compatible to unraid 6.11.5 stable any more) I updated all my plugins and then unraid from 6.11.5 stable to 6.12.0-rc2. After a reboot and some testing 'fix common problems' greeted me with a warning for this plugin. After I uninstalled it, the warning was gone. Will there be an updated/6.12 compatible version of this Plugin? Edited March 23, 2023 by DataCollector Quote Link to comment
ich777 Posted March 23, 2023 Share Posted March 23, 2023 37 minutes ago, DataCollector said: Will there be an updated/6.12 compatible version of this Plugin? Please install the updated plugin from @SimonF until @b3rs3rk merges his Pull Request with this link (simply go to Plugins -> Install Plugin -> paste the link -> click Install): https://raw.githubusercontent.com/SimonFair/gpustat-unraid/master/gpustat.plg It has also some cool improvements like multi GPU support. 2 Quote Link to comment
insomnia417 Posted March 26, 2023 Share Posted March 26, 2023 (edited) Quote intel_gpu_top -J pci:slot=0000:00:02.0 { "period": { "duration": 30.432867, "unit": "ms" }, "frequency": { "requested": 0.000000, "actual": 0.000000, "unit": "MHz" }, "interrupts": { "count": 32.859211, "unit": "irq/s" }, "rc6": { "value": 100.000000, "unit": "%" }, "power": { "GPU": 0.000000, "Package": 11.437749, "unit": "W" }, "imc-bandwidth": { "reads": 3472.916170, "writes": 292.405664, "unit": "MiB/s" }, "engines": { "Render/3D/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Blitter/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "VideoEnhance/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" } }, "clients": { } } Quote root@Unraid:~# cat /tmp/gpujson2 cat: /tmp/gpujson2: No such file or directory root@Unraid:~# cat /tmp/gpujson Time = Sun, 26 Mar 2023 16:44:04 +0800 Quote gpustat.cfg: VENDOR="intel" GPUID="0000:00:02.0" TEMPFORMAT="C" DISPCLOCKS="1" DISPENCDEC="1" DISPPCIUTIL="1" DISPTEMP="1" DISPFAN="1" DISPPWRDRAW="1" DISPPWRSTATE="1" DISPTHROTTLE="1" DISPSESSIONS="1" UIREFRESH="1" UIREFRESHINT="1000" DISPMEMUTIL="1" DISP3DRENDER="1" DISPBLITTER="1" DISPVIDEO="1" DISPVIDENH="1" DISPINTERRUPT="1" DISPEVENT="1" DISPVERTEX="1" DISPTEXTURE="1" DISPSHADEREXP="1" DISPSEQUENCER="1" DISPSHADERINTER="1" DISPSCANCON="1" DISPPRIMASSEM="1" DISPDEPTHBLK="1" DISPCOLORBLK="1" DISPGFXTRANS="1" ALL is changed, but dashboard still not work ,please help ,thank you my CPU is W-1290P (P630 , 9BC6) Edited March 26, 2023 by insomnia417 Quote Link to comment
SimonF Posted March 26, 2023 Share Posted March 26, 2023 24 minutes ago, insomnia417 said: ALL is changed, but dashboard still not work ,please help ,thank you my CPU is W-1290P (P630 , 9BC6) Which version are you running and are you running 6.12rc? Have you been into the settings and selected GPU? Can you do a screen print. Quote Link to comment
insomnia417 Posted March 26, 2023 Share Posted March 26, 2023 13 minutes ago, SimonF said: 你运行的是哪个版本,你运行的是 6.12rc?您进入设置并选择了 GPU 了吗?你能做一个屏幕打印。 yes , running 6.12rc2 , when i setting and save , it alway reset null , Quote Link to comment
SimonF Posted March 26, 2023 Share Posted March 26, 2023 Click check box and save Quote Link to comment
insomnia417 Posted March 26, 2023 Share Posted March 26, 2023 6 minutes ago, SimonF said: Click check box and save yes , i means i have saved , but it still show null Quote Link to comment
SimonF Posted March 26, 2023 Share Posted March 26, 2023 30 minutes ago, insomnia417 said: yes , i means i have saved , but it still show null Should look like this after apply. If not try removing and reinstalling. Quote Link to comment
shinzi Posted March 26, 2023 Share Posted March 26, 2023 5 hours ago, insomnia417 said: yes , i means i have saved , but it still show null try to set the system language to English. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.