shimee Posted March 8, 2020 Share Posted March 8, 2020 (edited) Hi All, I recently tried to update from the GUI, from 6.8.1 to 6.8.2. Since then, I cannot boot the server. I have connected it to a monitor and can see that immediately after my SAS>SATA controller detects drives OK, the Unraid boot goes immediately to "Boot Error". Nothing else to go on. I checked the USB in a PC, and followed a couple of threads, specifically: 1. Download old version and copy bzroot, bzconfig etc 2. Copy entire contents of previous folder on Flash drive to Root. Neither of these have worked. I don't want to say this publicly, but before anyone asks, my last backup of unRAID is on my last PC backup, which is on the array. Any help would be greatly appreciated. Edited March 8, 2020 by shimee added versions Quote Link to comment
Vr2Io Posted March 8, 2020 Share Posted March 8, 2020 Controller init error, call trace ? pls shoot the error screen. Quote Link to comment
shimee Posted March 9, 2020 Author Share Posted March 9, 2020 Im not familiar with those terms, are they processes I should be following to obtain information? The error screen is a black screen that says "Boot Error". I'm thinking I need to just start all over again, assuming the data on my array is safe. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.