TIE Fighter Posted March 9, 2020 Share Posted March 9, 2020 Hi there. i am useing Unraid version 6.6.7 and want to upgrade to version 6.8.2 . in webui tools->update OS only shows the latest version 6.8.3 . useing the Plugins/Install Plugin, select/copy/paste the plugin URL and click Install only gives the latest release i have downloaded the unRAIDServer-6.8.2-x86_64.zip from https://unraid.net/download how do i procced in the most simpliest way. from an old version, do I just extract the contents of the zip file to the flash drive with the usb flasdrive ejected from the server and pluged in to a computer? will this overwrite some config files? brgds Quote Link to comment
JorgeB Posted March 9, 2020 Share Posted March 9, 2020 Just now, TIE Fighter said: from an old version, do I just extract the contents of the zip file to the flash drive with the usb flasdrive ejected from the server and pluged in to a computer? Extract just the bz* files and replace the ones on the flash drive, then reboot. Quote Link to comment
TIE Fighter Posted March 9, 2020 Author Share Posted March 9, 2020 so in this case, of all the files in the unRAIDServer-6.8.2-x86_64.zip only the ones below in root of usb flashdrive i require to extract and replace? bzfirmware bzfirmware.sha256 bzimage bzimage.sha256 bzmodules bzmodules.sha256 bzroot bzroot.sha256 bzroot-gui bzroot-gui.sha256 thanks for fast reply Quote Link to comment
Squid Posted March 9, 2020 Share Posted March 9, 2020 Curious why you don't want 6.8.3? Quote Link to comment
TIE Fighter Posted March 9, 2020 Author Share Posted March 9, 2020 (edited) 14 hours ago, Squid said: Curious why you don't want 6.8.3? the WOL from sleep useing dynamix S3 sleep app stopped working when upgraded from 6.6.7 to 6.8.3 have been scrolling around the forums for a solution and some people find it working in 6.8.2. but this did not helped me . Edited March 10, 2020 by TIE Fighter Quote Link to comment
TIE Fighter Posted March 10, 2020 Author Share Posted March 10, 2020 (edited) so i get it working again by adding "ethtool -s eth0 wol g" into the go script in unraid_flashdrive/config. as ref https://www.kodinerds.net/index.php/Thread/68385-Problem-sleep-in-6-8-0/?pageNo=1&s=bac67e3f95623ffafcba60afe33e8744ece4ba97 and the wiki for dynamix S3 Sleep app https://wiki.unraid.net/Setup_Sleep_(S3)_and_Wake_on_Lan_(WOL) for info: to edit the go script file in unraid 6.8.x i had to set Krusader to run as 'root' accordning to this thread now fully enjoying the new features in unraid 6.8.3 🙂 Edited March 10, 2020 by TIE Fighter Quote Link to comment
TIE Fighter Posted March 10, 2020 Author Share Posted March 10, 2020 15 hours ago, johnnie.black said: Yep. i followed your info and this did the trick, however i found that it has been created dulpicated of the folders unraid_flashdrive unraid_shares unraid_unassigned_disk is this something i can delete and how can i do that? the original folders where named in capital letters UNRAID UNRAID_FLASHDRIVE UNASSIGNED_DEVICES pls to hear your reply Quote Link to comment
JorgeB Posted March 10, 2020 Share Posted March 10, 2020 1 hour ago, TIE Fighter said: i followed your info and this did the trick, however i found that it has been created dulpicated of the folders Where are those folders? Those do not exist by default. Quote Link to comment
TIE Fighter Posted March 10, 2020 Author Share Posted March 10, 2020 located at the root of the usb flash drive as showed in attached picture from Krusader. Blue are original folders renamed in capital letters Yellow are "new" showed, the contents are exactly the same when i open the folders. Quote Link to comment
trurl Posted March 10, 2020 Share Posted March 10, 2020 You must have done something in your Krusader docker setup. Your Krusader screenshot by itself is not evidence that there are multiple folders on the flash drive. It is only evidence that there are multiple mappings in your Krusader docker. Post your docker run for Krusader as explained in the very first link in the Docker FAQ in the Docker Engine subforum. Quote Link to comment
TIE Fighter Posted March 10, 2020 Author Share Posted March 10, 2020 Please see attached, settings config for krusader in docker. you mean i have to rename the krusader docker settings in to the exactly name of folders? Quote Link to comment
trurl Posted March 10, 2020 Share Posted March 10, 2020 That is not your docker run command. Did you look in the Docker FAQ for instructions as I told you to? 2 hours ago, trurl said: Post your docker run for Krusader as explained in the very first link in the Docker FAQ in the Docker Engine subforum. Quote Link to comment
TIE Fighter Posted March 10, 2020 Author Share Posted March 10, 2020 2 hours ago, trurl said: That is not your docker run command. Did you look in the Docker FAQ for instructions as I told you to? as per Docker FAQ pls see picture attached. Quote Link to comment
trurl Posted March 10, 2020 Share Posted March 10, 2020 As suspected, you have multiple container mappings for the same host mapping. Each of those container mappings that are in UPPER CASE are also mapped in lower case to the same host path. You really should try to understand docker volume mappings instead of blindly following instructions. If all you wanted to accomplish was editing go, you could have done that directly with the Config File Editor plugin. Quote Link to comment
TIE Fighter Posted March 11, 2020 Author Share Posted March 11, 2020 15 hours ago, trurl said: As suspected, you have multiple container mappings for the same host mapping. Each of those container mappings that are in UPPER CASE are also mapped in lower case to the same host path. You really should try to understand docker volume mappings instead of blindly following instructions. If all you wanted to accomplish was editing go, you could have done that directly with the Config File Editor plugin. thank you for the tip, reason is i did not touch the Krusader settings so it was not clear at first why this happened. Quote Link to comment
trurl Posted March 11, 2020 Share Posted March 11, 2020 2 hours ago, TIE Fighter said: i did not touch the Krusader settings Those are definitely not the default settings for the Krusader docker template. If you did not change them now then you must have already set them this way before. These things don't happen by themselves. I think many people are initially confused just by the word "map" in this context. In more abstract settings such as mathematics, a "mapping" is just a correspondence. Just as a place on a road map corresponds to a place in the world, a docker container mapping corresponds to something on the host. A volume mapping is a correspondence between a path inside the container, and a path on the host computer. Similarly, a port mapping is a correspondence between a port used by the container, and a port on the host computer. You had set up 2 different container paths for the same host path in several places. You can see in that first screenshot you posted, for example, that /boot (which is the flash drive) is mapped twice. But what you can't really see in that screenshot is what it is actually mapped to. The "Container Path" text that appears below that is just text that you can edit and it isn't really used for anything except a reminder to yourself. If you click on the Edit button for that mapping, you can see the details for the mapping. That is why I asked for the docker run command, because the screenshot didn't give all the information. If you click on the Edit button for each of those /boot mappings you have, you will see one of them in lowercase and the other in uppercase, which results in 2 different paths (differing by case), to the same exact thing on the host (when you look at it within the container). Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.